STANDARD MICROSYSTEMS CORPORATION

             IBM LAN Server v2.0 and v3.0 OS/2 Requester
                      For Ethernet LAN Adapters

                         INSTALLATION GUIDE

  This software is licensed by SMC for use by its customers only.
       Copyright (c) 1994 Standard Microsystems Corporation.
                        All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the IBM LAN server OS/2 requester 
   from the SuperDisk to your PC.

o  How to install the IBM LAN server OS/2 requester.


COPYING THE DRIVER FILES

From the EZStart Driver Installation screen, select 'Copy Files'
to copy all the files used by this driver from the SuperDisk to 
the Destination Directory recommended by EZStart, or to a different
directory that you specify.

The EZStart default Destination Directory is a:\NDIS.  Please make 
a backup copy of the SuperDisk before EZStart copies files to the
SuperDisk to create an "option" diskette.


INSTALLING THE DRIVER

1. Insert the SMC or IBM LAN Adapter Protocol Support (LAPS)
   Version 1.00 diskette into your computer's disk drive.

2. Type: LAPS

3. Press the Enter key.

   The IBM logo appears.

4. Select the INSTALL button.

5. Specify the target drive (usually C:\) and press Enter or
   select OK.  Files will be copied to target drive, then 
   select OK.

6. Select the INSTALL button a second time to load the SMC 
   drivers and press ENTER.

7. Place the SuperDisk in drive a:.

8. Change "Install Additional Network Driver" panel to read
   "a:\NDIS", then select OK.

9. Press OK for each driver.

10. Select the Configure button.

11. Select "Configure LAN transports" option, then select Continue.
    
    The Configure Workstation screen appears.

12. From the Network Adapters window, select "SMC EtherEZ for OS/2" 
    followed by the Add button.

    This adapter name appears in the Current Configuration window.

13. If you want to enable "RIPL" features, select "IBM IEEE 802.2" 
    from the Protocols window followed by Add.

14. Select "IBM OS/2 NETBIOS" followed by Add. (You may also need to 
    select the "IBM NetWare Requester" option and Add, depending on 
    your network.)

    Each time you select the Add button, the selected option appears
    in the Current Configuration window, below the chosen driver.

15. Select OK.

16. Select Exit.

    The CONFIG.SYS Update screen appears.

17. Specify the drive where the CONFIG.SYS file resides.

18. Select the Continue button.

19. Select OK.

20. Select Exit.

21. Reboot your computer. Use the OS/2 Shutdown process to exit from
    the program in an orderly fashion.

21. Reboot your computer. Enter OS/2, and insert the OS/2 Requester
    Install diskette into your computer's disk drive (a:\).

23. From the OS/2 prompt, type: LANINST.

24. Press ENTER.

25. Select OK at the IBM logo, then select OK again.

26. Select the "Advanced" option.

    The Installation Tasks panel appears.

27. Select "Install or Configure this workstation", then select OK.

28. Select "Install or remove a component", then select OK.

29. From the displayed list, highlight all other components you
    want to install.  Use the arrow keys to choose each component
    and press the space bar to highlight it.  Select the Install
    button and the word "Installed" appears in the Status column.
    After you select all the components you need for this
    installation, select the OK button.

Note: Some components have the word "Install" next to them. It is
      recommended that you select these components for installation
      along with any other comnponents you choose to install.

30. Select the "Configure a component" option and select OK.

31. Select a component to configure from the list and select the
    Configure button (Default is "Requester").

32. Specify the requester name and the domain name for that
    component and select OK.

33. If you want the server to start automatically when one of
    its workstations is started, select YES.

34. Select the requester services you require (either 
    "Messenger" or "Message pop-up") and select OK.

    The Configure screen reappears.

35. Select OK.  At "Apply the Changes" select OK and input the 
    discs as required.  At the file backup panel select OK.

36. Select the "Configuration complete" option.

37. Select the LAN adapter to which this configuration applies.
    If there is only one adapter in this computer, select
    "Adapter 0" followed by OK.

38. Select OK when the Configure screen appears.

39. Select the "Apply the changes" option followed by OK.

40. Follow the screen prompts to copy all files from the
    Requester diskettes to your computer's hard disk.

    This completes the installation procedure.


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and EtherEZ,
EtherCard Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite
16C Ultra, EliteSeries, EZStart, and SuperDisk are trademarks of 
Standard Microsystems Corporation.  Other product and company names 
are registered trademarks or trademarks of their respective holders.