VER: 1.01
	SYN: 1.00
	DR SMC8000
	{
		Des:	$SMC8000_DRIVER_DESCRIPTION
		Help:	$SMC8000_DRIVER_HELP
		File:	$SMC8000_DRIVER_FILE
		Par:	1.00

		Timeout: 5

		PROMPT PORT
			if(BUS != MCA) REQUIRED
			else HIDDEN
		{
			Type:	        HEX(3)
			Values:	        280, 200, 220, 240, 260, 2A0, 2C0, 2E0,	300, 320, 340, 360, 380
			Default: 	280
                        ReservedLength: 20
		}

		PROMPT SLOT
			if(BUS == MCA) REQUIRED
			else HIDDEN
		{
			Type:	HEX(1)
			Values:	1, 2, 3, 4, 5, 6, 7
		}

		PROMPT MEMORY
			if(BUS != MCA) OPTIONAL
			else HIDDEN
		{
                        Help: $SMC8000_1
			Type:	HEX(4)
			Values:	c000-dfff
                        ReservedLength: 200
                        Default: d000
		}

		PROMPT INT
			if(BUS != MCA) OPTIONAL
			else HIDDEN
		{
                        Help: $SMC8000_2
			Type:	HEX(2)
			Values:	3, 4, 5, 7, 9, 10, 11, 15
                        Default: 3
		}

		FRAME FrameSelect
		{
		 	Help:$SMC8000_3

			CD:   $SMC8000_4
			CH:   'Ethernet_802.3'

			CD:   $SMC8000_5
			CH:   'Ethernet_802.2'

			CD:   $SMC8000_6
			CH:   'Ethernet_SNAP'

			CD:   $SMC8000_7
			CH:   'Ethernet_II'

			Def:	2, 1

		}


	}



	
DLANG:	4
;English
	$SMC8000_1 = "This value is not required for soft-configured adapters."
	$SMC8000_2 = "This value is not required for soft-configured adapters."
	$SMC8000_3 = "The default frame type is 802.2.
			      You can remove this frame type or
			      add the 802.3, 802.2 SNAP, or the Ethernet II frame
			      types."
	$SMC8000_4 = "802.3"
	$SMC8000_5 = "802.2"
	$SMC8000_6 = "802.2 SNAP"
	$SMC8000_7 = "Ethernet II"

	; default English
	$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
	$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
			or a microchannel NetWare server. You can have
			maximum of four network boards in your server.
			Their settings must not conflict.\n\n You can load
			the driver for each board and for each additional
			frame type assigned to the board (Maximum: 16 times).
			The driver loads reentrantly.\n"
	$SMC8000_DRIVER_FILE = "SMC8000.LAN"








LANG:	6
;French
	$SMC8000_1 = "This value is not required for soft-configured adapters."
	$SMC8000_2 = "This value is not required for soft-configured adapters."
	$SMC8000_3 = "The default frame type is 802.2.
			      You can remove this frame type or
			      add the 802.3, 802.2 SNAP, or the Ethernet II frame
			      types."
	$SMC8000_4 = "802.3"
	$SMC8000_5 = "802.2"
	$SMC8000_6 = "802.2 SNAP"
	$SMC8000_7 = "Ethernet II"

	; default English
	$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
	$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
			or a microchannel NetWare server. You can have
			maximum of four network boards in your server.
			Their settings must not conflict.\n\n You can load
			the driver for each board and for each additional
			frame type assigned to the board (Maximum: 16 times).
			The driver loads reentrantly.\n"
	$SMC8000_DRIVER_FILE = "SMC8000.LAN"








LANG:	7
;German
	$SMC8000_1 = "This value is not required for soft-configured adapters."
	$SMC8000_2 = "This value is not required for soft-configured adapters."
	$SMC8000_3 = "The default frame type is 802.2.
			      You can remove this frame type or
			      add the 802.3, 802.2 SNAP, or the Ethernet II frame
			      types."
	$SMC8000_4 = "802.3"
	$SMC8000_5 = "802.2"
	$SMC8000_6 = "802.2 SNAP"
	$SMC8000_7 = "Ethernet II"

	; default English
	$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
	$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
			or a microchannel NetWare server. You can have
			maximum of four network boards in your server.
			Their settings must not conflict.\n\n You can load
			the driver for each board and for each additional
			frame type assigned to the board (Maximum: 16 times).
			The driver loads reentrantly.\n"
	$SMC8000_DRIVER_FILE = "SMC8000.LAN"








LANG:	8
;Italian
	$SMC8000_1 = "This value is not required for soft-configured adapters."
	$SMC8000_2 = "This value is not required for soft-configured adapters."
	$SMC8000_3 = "The default frame type is 802.2.
			      You can remove this frame type or
			      add the 802.3, 802.2 SNAP, or the Ethernet II frame
			      types."
	$SMC8000_4 = "802.3"
	$SMC8000_5 = "802.2"
	$SMC8000_6 = "802.2 SNAP"
	$SMC8000_7 = "Ethernet II"

	; default English
	$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
	$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
			or a microchannel NetWare server. You can have
			maximum of four network boards in your server.
			Their settings must not conflict.\n\n You can load
			the driver for each board and for each additional
			frame type assigned to the board (Maximum: 16 times).
			The driver loads reentrantly.\n"
	$SMC8000_DRIVER_FILE = "SMC8000.LAN"








LANG:	14
;Spanish
	$SMC8000_1 = "This value is not required for soft-configured adapters."
	$SMC8000_2 = "This value is not required for soft-configured adapters."
	$SMC8000_3 = "The default frame type is 802.2.
			      You can remove this frame type or
			      add the 802.3, 802.2 SNAP, or the Ethernet II frame
			      types."
	$SMC8000_4 = "802.3"
	$SMC8000_5 = "802.2"
	$SMC8000_6 = "802.2 SNAP"
	$SMC8000_7 = "Ethernet II"

	; default English
	$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
	$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
			or a microchannel NetWare server. You can have
			maximum of four network boards in your server.
			Their settings must not conflict.\n\n You can load
			the driver for each board and for each additional
			frame type assigned to the board (Maximum: 16 times).
			The driver loads reentrantly.\n"
	$SMC8000_DRIVER_FILE = "SMC8000.LAN"