T1108 NDIS 2 driver for Windows for Workgroups

    ----------------------------------------------------------------------
    Installing TR2KNDIS for Windows for Workgroups
    ----------------------------------------------------------------------

    The NDIS drivers, TR2KNDIS.DOS is compatible with
    Microsoft's Windows for Workgroups Network Operating environment.

    The file called OEMSETUP.INF in the ROOT directory of the T1108
    Driver Set diskette installs the NDIS.DOS driver
    for Windows for Workgroups, supplying setup information.  With the
    OEMSETUP.INF file, it is easy to use Setup or Control Panel in Windows
    for Workgroups to install the NDIS driver.  This file specifies
    the NDIS driver files on the disk and any additional files (such
    as font files) that NDIS requires.

    1. Start Windows.
              +----------------+
    2. Select |  CONTROL PANEL |
              +----------------+
              +------------+
    3. Select |  NETWORK   |
              +------------+
                                      +-----------------------+
    4. From the options menu, select  |   NETWORK ADAPTERS    |
                                      +-----------------------+
              +-------+
    5. Select |  ADD  |
              +-------+

              +---------------------------------------+
    6. Select |  UNLISTED OR UPDATED NETWORK ADAPTER  |
              +---------------------------------------+

    7. Type the path or drive to the T1108 Driver Set floppy diskette.
       For example:

      a:\

       The driver should now display in the table.

                              +------------------------+
    8. Highlight and select   |  TMS380/2000 Adapter   |
                              +------------------------+


    NOTE: When re-loading the OEMSETUP.INF file for an upgrade, from the
    DOS prompt delete the OEMn.INF file on the hard drive, before loading
    Windows. Otherwise, the Windows for Workgroups program will not
    recognize the new driver.