Installing The NDIS 3.0 Driver
------------------------------

Installation of NE100TX-E PCI Fast Ethernet Card's driver for specific 
environment is described below.

Microsoft Windows NT
--------------------

Note:
-----
1) The directory structure provided on the NE100TX-E PCI Fast Ethernet 
   Card's driver diskette has been setup for automatic OEM installation. 
   Also, more information can be found in the Microsoft Windows NT User's 
   Guide.

2) Only x86-based Windows NT platforms are supported.

3) For Windows NT 3.5 & 3.51 installation, specify the driver
   source path to the following :

            \WINNT\NT35

4) For Windows NT 4.0 installation, specify the driver
   source path to the following :

            \WINNT\NT40

Follow the steps listed below:
------------------------------
For NT35 & NT351

1       Insert the NE100TX-E PCI Fast Ethernet Card's driver diskette into the 
        floppy drive.

2       From the "Control Panel" in the "Windows NT Main" window, double click
        on the "Network" icon to install the NE100TX-E PCI Fast Ethernet Card.

3       In the "Network Settings" dialog box, choose "Add Adapter".

4       In the "Add Network Adapter" dialog box, pull down the adapter card list
        menu and select "<Other> Requires disk from manufacturer" from the list
        and continue.

5       In the next window, enter:

                A:\WINNT\NT35

6       Then, select "NE100TX-E PCI Fast Ethernet Adapter" from the dialog box to install
        the NE100TX-E PCI Fast Ethernet Card.

8       Reboot your system to complete the driver installation process.

For NT40

1. Double click "Network" icon in "Control Panel".

2. Select "Adapter" from "Network" box.

3. Click "Add" and select "Have Disk".

4. Specify driver path as "A:\WINNT\NT40" and press OK.

5. It will show "NE100TX-E PCI Fast Ethernet Adapter".

6. Press Ok and follow on-screen indtructions to complete.
-------------------------------------[END]--------------------------------------