NDC NE100TX Auto 10/100 PCI Fast Ethernet Adapter
SCO_UNIX Driver Installation
=====================================================

INSTALLATION PROCDURE

1)   copy the driver package to your SCO_UNIX.
     -- make a new directory to save the PCI driver package
        and change to it.
            eg.  # mkdir pci
                 # cd pci
     
     -- use the "doscp" command to copy package.
            eg.  # doscp a:\sco\ne100tx.z /pci/ne100tx.dd.Z

2)   uncompress the file.

        # uncompress ne100tx.dd.Z

3)   Insert a formatted diskette into floppy, use "dd" command to create
     a installation diskette for use.

        # dd if=ne100tx.dd of=/dev/rfd0135ds18

     (assume the drive a: is /dev/rfd0135ds18, check your system)


4)   use the 'custom' utility to install the package to SCO_UNIX.
        # custom

5)   use 'netconfig' utility to configure the PCI adapter to your system.
        # netconfig

Note : If you have any problem in using the 'custom' and 'netconfig'
       utility, you can refer to SCO_UNIX manual page.