NDC Instant-Link Ethernet PCI Adapter
NDIS Driver for Microsoft Windows NT 3.1 / 3.5 / 3.51
=====================================================

INSTALLATION PROCEDURE

I. Installing the ND5200 driver for Windows NT [tm]
-------------------------------------------------------

1.   Open the Windows NT [tm] Networks Control Program Applet (NCPA)
     from inside the Window Control Panel.

2.   Click on [Add_Adapter].

3.   Select [<Other> Requires disk from the manufacturer]
     in the Add Network Adapter box.

4.   Insert the ND5200 driver kit floppy in the floppy drive(A: or B:).

5.   Modify the default distribution path in the Windows NT [tm]
     Setup box to point to the driver located path in "ND5200
     Setup disk" then click on [Continue].

     For Windows NT 3.1, to specify the path as
            A:\I386\NT31

     For Windows NT 3.5/3.51, to specify the path as
            A:\I386\NT35

6.   Select your option
            [NDC ND5200 PCI Ethernet Controller    ]
     from the Select OEM Option box.

7.   For  PCI options, a Dialog box pops up to select the:

     ConnectionType:

        o AutoDetection               In AutoDetection mode the driver
                                      checks first the Twisted Pair port.
                                      If the Link Test fails the driver
                                      checks to AUI Thinwire. If not carrier
                                      is detected  the driver switches to
                                      AUI Thickwire.
        o Twisted Pair

        o Twisted Pair-Full Duplex    To connect to Full Duplex hubs

        o Twisted Pair-No Link Test   To connect hubs not supporting
                                      the Link Integrity Test
        o AUI-Thinwire                BNC connector

8.   Upon completion, one of the following adapters
            [ [n]NDC ND5200 PCI Ethernet Controller    ]
     appears in the Installed Adapter Cards list of the
     Network Setting box (n is the adapter number).

9.   Click on [Close] to complete the Network Setting
     initialization.

10.  Shutdown and reboot the system.


II. Installing multiple PCI boards
-----------------------------------

Repeat the procedure described in the previous paragraph.


NDC Instant-Link Ethernet PCI Adapter
NDIS Driver for Microsoft Windows NT 4.0
=========================================

INSTALLATION PROCEDURE

  1. Plug ND5200 PCI adapter into one empty PCI slot and boot up your
     NT 4.0.

  2. Double click the "Network" icon in "Control Panel".

  3. Choose "adapters" tab from network properties, and then click the
     "add" button.

  4. Click "Have Disk" button.

  5.Insert the ND5200 diskette into floppy disk, type the complete path
    where ND5200 driver is located:

    e.g. :  a:\I386\NT35,

  6.Press "ok" . The screen will show "NDC ND5200 PCI Ethernet Controller".

  7.Press "ok" and Press"close" to reboot your system.