NDC Instant-Link Ethernet PCI Adapter
NDIS Driver for Microsoft Windows 95.
=====================================================
INSTALLATION PROCEDURE
1) Insert ND5200 Ethernet PCI Adapter into your system.
2) Turn on your computer and start Windows 95.
3) Windows 95 detects the new hardware and installs the "PCI DEC
chip 21040 Based Adapter" driver for it. Let it finish then
restart the computer.
4) Now we are about to remove the DEC 21040 Driver and install
the ND5200 PCI Ethernet Adapter driver.
5) Remove DEC 21040 Driver.
a. click the "Start" button.
b. select "Settings" then open "Control Panel" window.
c. double-click "System" icon to open "System Properties" window.
d. select "Device Manager" tab by single-click it.
e. double-click "Network Adapters" and select "DEC 21040 Adapter
Based Adapter".
f. click "Remove" button.
g. click "OK" from "Confirm Device Removal" window.
h. click "Close" button to exit "System Properties" window.
6) In the "Control Panel" window, click on the "Network" icon.
7) In the Network Configuration dialog box, choose the "Add.." button.
"Select Network Component Type" dialog box appears, and select
"Adapter" icon.
8) In the list of Manufacturers, select "Have Disk", and then choose
the "OK" button.
9) Insert the ND5200 PCI Ethernet Adapter driver diskette into floppy drive
and specify the LAN driver path, and then choose the "OK" button.
for example : A:\win95
10) Then, you will see "ND5300 PCI Ethernet Adapter" in the Network
Configuration dialog box, select it and then click on the "Properties"
button.
11) In this dialog box, select "Resources ",the screen will come up with
settings: IRQ and I/O address. Make sure the values that come up
match the actual board settings( Automatic setting ).
12) Restarting your system you will acquire network service.
------------------------------[ END ]--------------------------------
