NDC Instant-Link Ethernet PCI Adapter
NDIS Driver for Microsoft Windows for Workgroups Installation
==============================================================

This file contains the installation method for the following
environments:

        A. Windows for Workgroups 3.10.
        B. Windows for Workgroups 3.11.


For PROTOCOL.INI parameters, refer to SETTING.TXT file. (in the root
directory of ND5200 Setup Disk.)



* --------------------------------------------------------------------- *
* A. NDIS Driver for Microsoft Windows for Workgroups 3.10 Installation *
* --------------------------------------------------------------------- *

This Card comes with NDCGO2, this program provides a fast way to
install Windows for Workgroups. We recommend you run NDCGO2 to install
Windows for Workgroups by selecting the Windows for Workgroups option.
Otherwise, follow the procedure below to complete the installation
manually.


INSTALLATION PROCEDURE

1)   Start Windows by typing in "WIN".

2)   Select the "Control Panel" icon in Main, group in Windows.

3)   Select the "Network" icon.

4)   Select the "Adapters" item in "Option" dialog.

5)   Push <Add> button.

6)   Select the adapter, "Unlisted or Updated Network Adapter".

7)   Input the located drive of 'Setup Disk' and the driver
     directory (\WINGROUP) in 'Install Driver' window and click
     "OK".
        e.g.
             A:\WINWROUP

8)   WFWG may ask you to insert a floppy disk. Insert the specified
     Driver Disk in the specified drive, and press <Enter>. You
     should then see the "Unlisted or Updated Network Adapter".


9)   Select the "Setup" item and set the "Burst Length", "Bus
     Number" and "Connection Type".

10)  Press <OK>.

11)  Press <Close>.

12)  Press <OK> twice.

13)  Restart computer.



* --------------------------------------------------------------------- *
* B. NDIS Driver for Microsoft Windows for Workgroups 3.11 Installation *
* --------------------------------------------------------------------- *

The Card comes with NDCGO2, this program provides a fast way to
install Windows for Workgroups. We recommend you run NDCGO2 to install
Windows for Workgroups by selecting the Windows for Workgroups option.
Otherwise, follow the procedure below to complete the installation
manually.


INSTALLATION PROCEDURE

1)   Start Windows by typing "WIN".

2)   Select the "Network Setup" icon in the "Network Program".

3)   Select the "Drivers" item.

4)   Select the "Add Adapter" item.

5)   Select "Unlisted or Updated Network Adapter" from "Add
     Network Adapter" window and click "OK".

6)   Input the located drive of 'Setup Disk' and the driver
     directory (\WINGROUP) in 'Install Driver' window and click
     "OK".
        e.g.
             A:\WINWROUP

7)   Select the "Setup" item and set the "Burst Length", "Bus
     Number" and "Connection Type".

8)   Select the protocol used by the rest of your network and make
     sure it is set as the "Default Protocol".

9)   Press <Close>.

10)  Press <OK>.

11)  Windows for Workgroups(WFW) may ask you to insert a few WFW disks.
     Insert the specified WFW disks in the specified drive to copy some
     new files.

12)  Restart computer.

------------------------------[ END ]--------------------------------