NDC Instant-Link Ethernet PCI Adapter
NDIS Driver for Microsoft LAN Manager Installation
==============================================================

This file contains the installation procedures for the following
environments:

        A. IBM PC LAN Program Workstation.
        B. IBM PC LAN Program Server.


For PROTOCOL.INI parameters, refer to SETTING.TXT file. (in the root
directory of ND5200 Setup Disk.)



* -------------------------------------------------------------- *
* A. NDIS Driver for IBM PC LAN Program Workstation Installation *
* -------------------------------------------------------------- *

INSTALLATION PROCEDURE

1)   At the DOS prompt, insert the IBM LAN Support Program (LSP)
     Version 1.30 (or later) diskette.

2)   Type: DXMAID

3)   Press the <Enter> key three times.

          The Environment Information screen appears.

4)   Specify the following values for the fields on this screen:

          Configuration for this computer?                Yes
          Use existing configuration information?         No
          Do you have adapter option diskettes?           Yes
          Are you configuring for two adapters?           No

          Source for LSP                                  A:\
          Target for new configuration                    C:\lsp

5)   Press <Enter> to store your choices.

          The program prompts you to install the option diskette.

6)   Insert the Setup Diskette in your source drive and specify
     the path: A:\NDIS2.

7)   Press <Enter>.

          The necessary files are copied from the "Setup Diskette"
          to your target directory on your computer's hard disk.

8)   Press <Enter> three times.

9)   Insert the LSP diskette and press <Enter>.

          The Current Configuration screen appears with the ND5200
          Ethernet adapter and protocols already selected.

10)  Press <F4>. LSP is installed.

11)  Use any text editor to edit the CONFIG.SYS file. Specify at
     least 20 files in the FILES= line; for example:

          files=20

     Once you save your CONFIG.SYS, reset your computer.

12)  Insert the PC LAN Install Diskette.

13)  Type: INSTALL

14)  Press <Enter>.

15)  Press <Enter> three more times.

16)  Select the level of function for this workstation, either
     "Basic Services" or "Extended Services".  Most of the time,
     select the second option.

17)  Specify "Workstation".

18)  Specify either "Send messages" or "Send, receive, and log
     messages" options. Most of the time, select the second option.

19)  Specify the target path for the PC LAN files. The default
     pathname is C:\DOS.

20)  Specify the machine's ID and the domain ID. The domain ID must
     be the domain server ID and must be the same for all
     workstations on the network.

21)  Follow the prompts to complete the installation until you
     reach the, Change System Configuration File screen. Usually,
     you should accept the default for the system configuration
     file.

     The Change System Batch File screen appears. Usually you
     should accept the default.



* ----------------------------------------------------------- *
* B. NDIS Driver for IBM PC LAN Program Server Installation   *
* ----------------------------------------------------------- *

INSTALLATION PROCEDURE

1)   At the DOS prompt, insert the IBM LAN Support Program (LSP)
     Version 1.30 (or later) diskette.

2)   Type: DXMAID

3)   Press the <Enter> key three times.

          The Environment Information screen appears.

4)   Specify the following values for the fields on this screen:

          Configuration for this computer?                Yes
          Use existing configuration information?         No
          Do you have adapter option diskettes?           Yes
          Are you configuring for two adapters?           No

          Source for LSP                                  A:\
          Target for new configuration                    C:\lsp

5)   Press <Enter> to store your choices.

          The program prompts you to install the option diskette.

6)   Insert the Setup diskette in your source drive and specify
     the path: A:\NDIS2.

7)   Press <Enter>.

          The necessary files are copied from the Setup diskette
          to your target directory on your computer's hard disk.

8)   Press <Enter> three times.

9)   Insert the LSP diskette and press <Enter>.

          The Current Configuration screen appears with the ND5200
          Ethernet adapter and protocols already selected.

10)  Press F4. LSP is installed.

11)  Use any text editor to edit the CONFIG.SYS file. Specify at
     least 20 files in the FILES= line; for example:

          files=20

     Once you save your CONFIG.SYS, reset your computer.

12)  Insert the PC LAN Install Diskette in your computer's diskette
     drive.

13)  Type: INSTALL

14)  Press <Enter>.

15)  Press <Enter> three more times.

16)  Select the level of function for this workstation, either
     "Basic Services" or "Extended Services".  Most of the time,
     select the second option.

17)  Specify "Server".

18)  Specify either "Send messages" or "Send, receive, and log
     messages" options. Most of the time, select the second option.

19)  Specify the target path for the PC LAN files. The default
     pathname is C:\DOS.

20)  Specify the machine's ID and the domain ID. The domain ID must
     be the domain server ID and must be the same for all
     workstations on the network.

21)  Follow the prompts to complete the installation until you
     reach the Change System Configuration File screen. Usually,
     you should accept the default for the system configuration
     file.

     The Change System Batch File screen appears. Usually you
     should accept the default.

------------------------------[ END ]--------------------------------