********************************************************************
;
; NDC ND5100 WINNT miniport driver oemsetup file(for WINNT 3.5)
;
;********************************************************************

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    PCMCIA
    "Jazz-Internal Bus"
[Options]
    ND5100
[IRQChoices]
    3
    4
    5
    9
    10
    12
    15
[IOChoices]
    300, 768
    320, 800
    340, 832
    360, 864
[FileConstants]
    UtilityInf      = "UTILITY.INF"
    ParamInf        = "NCPARAM.INF"
    subroutineinf   = "SUBROUTN.INF"
    SoftwareType    = "driver"
    Exit_Code       = 0
    NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
    IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
    Manufacturer    = "NDC"
    NetworkClass    = "Ethernet"
    ProductMajorVersion     = "1"
    ProductMinorVersion     = "0"
    ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

    ProductSoftwareName     = "ND5100"
    ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ND5100.sys"
    NetRuleSoftwareType     = "ND5100Sys ndisDriver ND5100Driver"
    NetRuleSoftwareUse      = $(SoftwareType)
    NetRuleSoftwareBindForm = """ND5100Sys"" yes no container"
    NetRuleSoftwareClass    = {"ND5100Driver basic"}
    NetRuleSoftwareBindable = {"ND5100Driver ND5100Adapter non exclusive 100"}

    ProductHardwareName     = "ND5100"
    NetRuleHardwareType     = "ND5100 ND5100Adapter"
    NetRuleHardwareBindForm = " yes yes container"
    NetRuleHardwareClass    = {"ND5100Adapter basic"}
    ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
    ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
    PcmciaKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(Manufacturer)
    NetClassKeyName = $(PcmciaKeyName)"\"$(NetworkClass)
[GeneralConstants]
    from      = ""
    to        = ""
    ExitCodeOk     = 0
    ExitCodeCancel = 1
    ExitCodeFatal  = 2
    KeyNull         = ""
    MAXIMUM_ALLOWED   = 33554432
    RegistryErrorIndex = NO_ERROR
    KeyProduct      = ""
    KeyPcmcia       = ""
    KeyParameters   = ""
    TRUE            = 1
    FALSE           = 0
    NoTitle            = 0
    ExitState   = "Active"
    OldVersionExisted = $(FALSE)
    DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Set !G:DebugOuputControl = 1
    Debug-Output "OEMNADN2.INF: Starting............"
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
                set StartLabel = removeadapter
        else-Ifstr(i) $(!NTN_InstallMode) == Update
                        set StartLabel = UpgradeSoftware
        else-Ifstr(i) $(!NTN_InstallMode) == bind
                set StartLabel = bindingadapter
        else-Ifstr(i) $(!NTN_InstallMode) == configure
                set CommonStatus = STATUS_REBOOT
                set ActivateDetection = TRUE
                set StartLabel = configureadapter
                Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Debug-Output "Cannot configure the NDC ND5100 PnP driver software."
                        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif
                        set Error = $($R0)
                        set from = end
                        set to = end
                        goto nonfatalinfo
                endif
    else
                set StartLabel = installadapter
                set OEM_ABANDON_OPTIONS = {}
                set OEM_ABANDON_SOFTWARE = FALSE
                set OEM_ABANDON_ON = TRUE
                set ActivateDetection = TRUE
    endif
    Debug-Output "OEMNADN2.INF: =================================================="
    Debug-Output "OEMNADN2.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMNADN2.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "OEMNADN2.INF: Option is: "$(Option)
    Debug-Output "OEMNADN2.INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "OEMNADN2.INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "OEMNADN2.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "OEMNADN2.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "OEMNADN2.INF: =================================================="

    Set DLLPATH = $(SrcDir)
    Set DetectedCard = FALSE
    Set PCMCIA = 0
    Set CardType = 0
    Set IOBaseAddrValue = *($(IOBaseAddrDecList), 9)
    Set IRQValue = *($(IRQList), 5)
    Ifstr(i) $(ActivateDetection) != TRUE
        Goto skipdetection
    Endif

skipdetection =+
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    Ifstr(i) $(DetectedCard) != TRUE
        Goto adaptersetup
    Endif
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Goto adaptersetup
    Endif
    Set DetectedParams = $($R1)
    Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    goto adapteroptions

configureadapter = +
    Set DLLPATH = $(!STF_WINDOWSSYSPATH)\drivers
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)

        Ifstr(i) $(ValueName) == $(IRQItemName)
            set IRQValue = $(ValueData)
        else-ifstr(i) $(ValueName) == $(IOBaseItemName)
            set IOBaseAddrValue = $(ValueData)
        else-ifstr(i) $(ValueName) == $(BusTypeItemName)
            set BusInterfaceType = $(ValueData)
        else-ifstr(i) $(ValueName) == $(BusNumberItemName)
            set BusNumber = $(ValueData)
        else-ifstr(i) $(ValueName) == "PCMCIA"
            set PCMCIA = $(ValueData)
        endif
    EndForListDo

    ifstr(i) $(IRQValue) == ""
        set IRQValue = *($(IRQList), 5)
    endif
    ifstr(i) $(IOBaseAddrValue) == ""
        set IOBaseAddrValue = *($(IOBaseAddrDecList), 9)
    endif

adaptersetup =+
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output "OEMNADE2.INF: parameter confidence too low to bypassconfiguration"
        Goto adapteroptions
    Endif
    Ifstr(i) $(DetectedCard) == TRUE
        Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
            Goto adapterverify
        Endif
    Endif
    goto adapteroptions
adapteroptions = +
    set from = adapteroptions
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        ifstr(i) $(!AutoNetInterfaceType) != ""
            set BusInterfaceType = $(!AutoNetInterfaceType)
        else
            set BusInterfaceType = 1
        endif
        ifstr(i) $(!AutoNetBusNumber) != ""
            set BusNumber = $(!AutoNetBusNumber)
        else
            set BusNumber = 0
        endif
        goto adapterverify
    endif

    ; set default value for IOBaseAddress
    set IOBaseAddress = *($(IOBaseAddrHexList), ~($(IOBaseAddrDecList),+
        $(IOBaseAddrValue)))

    read-syms MO_DependentDlg$(!STF_LANGUAGE)

reinput =+
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
                set IRQValue = $(Combo1Out)
                set IOBaseAddress = $(Combo2Out)
                ui pop 1
    else-ifstr(i) $(DLGEVENT) == "EXIT"
                set CommonStatus = STATUS_USERCANCEL
                Debug-Output "Action: exit. Bye."
                ui pop 1
                goto end
    else
                ui pop 1
                Debug-Output "Action: unknown. Bye."
                goto end
    endif

    set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
        $(IOBaseAddress)))

    ifstr(i) $(!STF_NCDETINFO) == {}
        ifint $(PCMCIA) != 1
            Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif
            set BusInterfaceType = $($R1)
            set BusNumber = $($R2)
        else
            set BusInterfaceType = 1
            set BusNumber = 0
        endif
    else
        set BusInterfaceType = *($(!STF_NCDETINFO),5)
        set BusNumber = *($(!STF_NCDETINFO),6)
    endif
adapterverify =+
    Ifstr(i) $(DetectedCard) != TRUE
        Goto skipoptions
    Endif
    Debug-Output "OEMNADN2.INF: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        Debug-Output "OEMNADN2.INF: Param_VerifyCard succeeded"
        Goto skipoptions
    Endif
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
                goto writeparameters
        endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
;               Ifstr(i) $(DoCopy) == "YES"
;                   ; get the source directory
;                   ifstr(i) $(!NTN_InstallPhase) == primary
;                       Set SrcDir = $(!STF_SRCDIR_KEYED)
;                   else
;                       Set !STF_SRCDIR_OVERRIDE = ""
;                       Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
;                       Ifint $($ShellCode) != $(!SHELL_CODE_OK)
;                           Goto ShellCodeError
;                       Else-Ifstr(i) $($R0) == STATUS_FAILED
;                           Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
;                           ifint $($ShellCode) != $(!SHELL_CODE_OK)
;                              goto ShellCodeError
;                           endif
;                           set Error = $($R0)
;                           Goto fatal
;                       Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
;                           Goto successful
;                       Endif
;                       Set SrcDir = $($R1)
;                   endif
;               Endif
                Ifstr(i) $(DoCopy) == "YES"
                    ; copy the drivers and dependence program to winnt system.
                    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Goto ShellCodeError
                    Else-Ifstr(i) $($R0) == STATUS_FAILED
                        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                           goto ShellCodeError
                        endif
                        set Error = $($R0)
                        Goto fatal
                    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                        Goto successful
                    Endif
                    Set SrcDir = $($R1)
                Endif

                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set Error = $($R0)
                    goto fatal
                endif
        endif
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add software components"
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add value list."
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        goto fatalregistry
       endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                CloseRegKey $(KeyParameters)
                CloseRegKey $(KeyAdapterRules)
                goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
writeparameters = +
    ifint $(BusInterfaceType) == 8
        set PCMCIA = 1
        set BusInterfaceType = 1
    endif
    set NewValueList = {{$(IRQItemName),$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {$(BusTypeItemName),$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
                        {$(BusNumberItemName),$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
;                       {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(WinBaseValue)},+
;                       {PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),$(AttrMemSize)},+
                        {$(IOBaseItemName),$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    ifint $(PCMCIA) == 1
        set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

        ; add registry data for PCMCIA adapter
        OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia
        Ifstr $(KeyPcmcia) != $(KeyNull)
            ; the
            CloseRegKey $(KeyPcmcia)
        else
            CreateRegKey $(!REG_H_LOCAL) {$(PcmciaKeyName),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyPcmcia
            Ifstr $(KeyPcmcia) == $(KeyNull)
               Debug-Output "ShellCode error."
;              Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), NONFATAL, "Create Reg(M) Failed"
               goto ShellCodeError
            endif
        endif

        OpenRegKey $(!REG_H_LOCAL) "" $(NetClassKeyName) $(MAXIMUM_ALLOWED) KeyPcmcia
        Ifstr $(KeyPcmcia) == $(KeyNull)
            CreateRegKey $(!REG_H_LOCAL) {$(NetClassKeyName),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyPcmcia
            Ifstr $(KeyPcmcia) == $(KeyNull)
               Debug-Output "ShellCode error."
;              Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), NONFATAL, "Create nettype error."
               goto ShellCodeError
            endif
        endif

        GetRegValue $(KeyPcmcia), $(DriverItemName), DriverRegInfo
        ifstr $(DriverRegInfo) != $(KeyNull)
             ifstr(i) *($(DriverRegInfo), 4 ) == $(ProductSoftwareName)
                 goto success ;
             else
;                Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), +
;                NONFATAL, "Reg<"*($(DriverRegInfo), 4 )">, ProductSW<"$(ProducrSoftwareName)">"

                 DeleteRegKey $(KeyPcmcia) $(DriverItemName)
             endif
        endif

        set NewValueList = {{$(DriverItemName),$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)} +
                            {AttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD), 4096)},+
                            {CardMemorySize,$(NoTitle),$(!REG_VT_DWORD),0} }
        Shell  $(UtilityInf), AddValueList, $(KeyPcmcia), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
;           Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), NONFATAL, "Add value failed"
            CloseRegKey $(KeyPcmcia)
            goto ShellCodeError
        endif

success =+
        CloseRegKey $(KeyPcmcia)
    else
        DeleteRegValue $(KeyParameters) "Pcmcia"
    endif  ; PCMCIA == 1

    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
          Debug-Output "ShellCode error."
          goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                goto fatalregistry
    endif
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                $(ProductSoftwareName)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    else
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = NO
    ifstr(i) $(AddCopy) == "YES"
       AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Source Media Descriptions]
     1 = "NDC ND5100 Setup Disk" , TAGFILE = ndcgo.exe
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
    STF_PRODUCT  = Winnt
    STF_PLATFORM = I386
[Files-Inf]
    1,      oemsetup.inf,    SIZE=36000,     RENAME=$(!UG_Filename)
[Files-ND5100]
    1,ND5100.SYS , SIZE=19456
[Files-ND5100PCMCIA]
    1,ND5100.SYS , SIZE=19456
[LanguagesSupported]
    ENG
[OptionsTextENG]
    ND5100     = "NDC ND5100 Ethernet PCMCIA LAN Adapter"
[FileConstantsENG]
    ProCaption   = "Windows NT Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
                   "Are you sure you want to cancel copying files?"
    ProCancelCap = "Network Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

    FunctionND5100Title             = "NDC ND5100 Network Card Setup"
    ProductSoftwareDescription     = "NDC ND5100 Ethernet PCMCIA Adapter Driver"
    ProductHardwareND5100Description= "NDC ND5100 Ethernet PCMCIA Adapter"
    ProductSoftwareTitle           = "NDC ND5100 Ethernet PCMCIA Adapter Driver"
    ProductHardwareND5100Title      = "NDC ND5100 Ethernet PCMCIA Adapter"
    ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
    ShellCodeErrorText      = "Shell Code Error."
    IRQList            = ^(IRQChoices, 1)
    IRQValues          = ^(IRQChoices, 1)
    IOBaseAddrHexList  = ^(IOChoices, 1)
    IOBaseAddrDecList  = ^(IOChoices, 2)
    DriverItemName     = "Driver"
    BusTypeItemName    = "BusType"
    BusNumberItemName  = "BusNumber"
    IRQItemName        = "InterruptNumber"
    IOBaseItemName     = "IoBaseAddress"

[DialogConstantsENG]
    Help        = "&Help"
    Exit        = "Cancel"
    OK          = "OK"
    HelpContext = ""
    Continue    = "Continue"
    Cancel      = "Cancel"

[MO_DependentDlgENG]
    Caption = $(Function$(Option)Title)

    DlgType = "RadioCombination"
    DlgTemplate = "NE2000"

    Label1 = "&IRQ Level:"
    Label2 = "I/O &Port Address:"
    Combo1List = $(IRQList)
    Combo1Out  = $(IRQValue)
    Combo2List = $(IOBaseAddrHexList)
    Combo2Out  = $(IOBaseAddress)
    ComboListItemsIn  = { Combo1List, Combo2List }
    ComboListItemsOut = { Combo1Out, Combo2Out }

    EditTextIn = ""
    EditTextLim = ""
    EditFocusOn  = ""

    NotifyFields = {NO, NO}
    CBOptionsGreyed = {}
    MinHelpId = 10
    MaxHelpId = 1050
    ;HelpContext = $(Help$(Option)Id)