NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
NDIS Driver for Microsoft Windows for Workgroups 3.10 Installation
==================================================================

The Card comes with NDCGO, this program provides a fast way to
install Windows for Workgroups. We recommend you run NDCGO to install
Windows for Workgroups by selecting the Windows for Workgroups option.
Otherwise, follow the procedure below to complete the installation
manually.


PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Start Windows by typing in "WIN".

2)   Select the "Control Panel" icon in Main, group in Windows.

3)   Select the "Network" icon.

4)   Select the "Adapters" item in "Option" dialog.

5)   Push <Add> button.

6)   Select the adapter, "NE2000 Compatible".

7)   WFWG may ask you to insert a floppy disk. Insert the specified
     Driver Disk in the specified drive, and press <Enter>. You
     should then see the "NE2000 Compatible" screen.

8)   Set the values of "Interrupt (IRQ)" and "Base I/O Port (hex)"
     Must match settings specified in NDCONF1.

9)   Press <OK>.

10)  Press <Close>.

11)  Press <OK> twice.

12)  Restart computer.


NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
NDIS Driver for Microsoft Windows for Workgroups 3.11 Installation
==================================================================

The Card comes with NDCGO, this program provides a fast way to
install Windows for Workgroups. We recommend you run NDCGO to install
Windows for Workgroups by selecting the Windows for Workgroups option.
Otherwise, follow the procedure below to complete the installation
manually.


PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Start Windows by typing "WIN:.

2)   Select the "Network Setup" icon in the "Network Program".

3)   Select the "Drivers" item.

4)   Select the "Add Adapter" item.

5)   Select "NE2000 Compatible" from "Add Network Adapter" window
     and click "OK".

6)   Select the "Setup" item and set the "Interrupt (IRQ)" and "Base
     I/O Port (hex)".  Must match the settings you specified in
     NDCONF1.

7)   Select the protocol used by the rest of your network and make
     sure it is set as the "Default Protocol".

8)   Press <Close>.

9)   Press <OK>.

10)  WFWG may ask you to insert a few WFWG disks. Insert the
     specified WFWG disks in the specified drive to copy some new
     files.

11)  Restart computer.