NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
NDIS Driver for SUN PC-NFS Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Insert the NDC Setup diskette into drive A: and copy the NE2000 NDIS
     driver to the destination subdirectory on your PC (the recommended
     Destination Subdirectory is C:\LANMAN).

          A:\> Copy A:\NDIS\NE2000.DOS C:\LANMAN

2)   Insert the "Installation and Connections" diskette into drive A: or
     B: .

3)   Go to drive A: or B: and type: "INSTALL" and press Enter.

4)   Specify the destination drive letter (usually C) and press
     Enter.

5)   Specify "Ethernet" and press Enter.

6)   Select the "NDIS" option.

7)   Follow the screen prompts to copy the PCNFS files to your
     destination drive.

8)   When prompted, press Enter to configure PCNFS.

9)   Specify the PC name, IP address, server name, and server IP
     address. If you need assistance, refer to the "Configuring
     PC-NFS" section of your Sun PC-NFS Installation Guide.

10)  Follow the screen prompts to complete the installation.

11)  When the installation is complete, select Quit to exit the
     configuration program, defer the boot, and return to DOS.

12)  Using any text editor, add the following line above the
     NFS_NDIS.SYS driver specification in your CONFIG.SYS file:

          device=c:\lanman\NE2000.DOS

     Note: The 'c:' shown in the line above indicates the
     destination drive you selected during the PCNFS installation.

13)  Use any text editor to edit the PROTOCOL.NFS file in the
     \LANMAN subdirectory in your Destination Directory:

     - Replace:

              [YOUR-MAC-MODULE]

     with:

              [NE2000_NIF]

     - Replace:

          drivername = yourmac$

     with:

          drivername = MS2000$

     - Replace:

          option1 = value1 etc.

     with:

          IOBASE = 0x300
          INTERRUPT = 3

     where the values for "INTERRUPT" and "IOBASE" must match what
     you specified by NDCONF1.

     - Replace:

          bindings = YOUR-MAC-MODULE

     with:

     bindings = NE2000_NIF

     - Locate the file PROTOCOL.NFS in the \LANMAN subdirectory on
     your destination drive and rename it to PROTOCOL.INI. Refer to
     your DOS manual if you need assistance.

     - Add the following NETBIND statement just before the NFS RUN
     statement in your AUTOEXEC.BAT file:

          C:\LANMAN\NETBIND
          NFSRUN

     Note: The 'C:' shown in the line above indicates the
     destination drive you selected during the PCNFS installation.

14)  Reboot the computer.

15)  Execute NFSCONF.EXE to configure system (i.e. Mount a virtual
     driver E:). Execute TELNET.EXE to do terminal emulation.


Following are the sample configuration files:

     CONFIG.SYS:

          SHELL=C:\COMMAND.COM /P /E:526
          DOS=HIGH, UMB
          rem ----pcnfs install
          DEVICE=C:\DOS\ANSI.SYS
          DEVICE=C:\NFS\PCNFS.SYS  /m
          DEVICE=C:\NFS\SOCKDRV.SYS

          DEVICE=C:\ECARD.EXE /IRQ=3 /PORT=300
               or
          DEVICE=C:\ECARDCS.EXE /IRQ=3 /PORT=300 (if Card Services
          is installed)

          DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN
          DEVICE=C:\LANMAN\NE2000.DOS
          DEVICE=C:\LANMAN\NFS-NDIS.SYS
          FILES=50
          BUFFERS=50
          LASTDRIVE=v
          STACKS=9,256

     PROTOCOL.INI at \LANMAN directory:

          [PROTOCOL MANAGER]
               DRIVERNAME = PROTMAN$

          [NE2000_NIF]
               DRIVERNAME = MS2000$
               INTERRUPT = 3
               IOBASE = 0x300

          [NFS-NDIS]
               DRIVERNAME = NFSLINK1
               BINDING = NE2000_NIF

     AUTOEXEC.BAT:
               ...
          SET TZ=PST8
          SET PATH=C:\;C:\NFS;C:\LANMAN
          SET NFSDRIVE=D
          C:\LANMAN\NETBIND
          PRT *
          NFSRUN