NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
NDIS Driver for Microsoft LAN Manager DOS Requester Installation
================================================================
PRE-INSTALLATION
Before installing the NOS or network applications, you should first
run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
We recommend you to select "Update CONFIG.SYS" in the "Configuration
Menu" before exiting NDCONF1.
A. Installation Procedure for LAN Manager V2.0
--------------------------------------------------
INSTALLATION PROCEDURE
1) Type "Setup" in Lan Manager directory (usually C:\LANMAN.DOS).
Press <Enter>.
2) Press <Enter>.
3) Choose "Select Network Drivers" in "Action". Press <Enter>.
4) Select "Novell NE2000 Ethernet Adapter", then press <Add
driver> button, and press <Add protocol>, press <OK>.
Workstation Primary parameters appear, press <OK>.
5) Press <OK> three times.
6) Choose "Save" in "Action".
7) Press <F3> to Exit.
8) Edit the PROTOCOL.INI in C:\LANMAN.DOS to set the "INTERRUPT"
and "IOBASE" under [NE2000_NIF]. Must match the NDCONF1 settings.
9) Reboot your computer.
This completes the installation procedure.
B. Installation Introduction for LAN Manager V2.1 (or later)
-------------------------------------------------------------
INSTALLATION PROCEDURE
1) Type "LMSETUP" in LAN Manager directory (usually
C:\LANMAN.DOS). Press Enter.
Microsoft LAN Manger Setup will appear.
2) Choose "Network Drivers..." in " Configuration ". Press Enter.
3) Choose <Add New Configs> ,press Enter.
Network Adapter Driver appears.
4) Select "Novell NE2000 Ethernet Adapter". Push <OK> button.
5) Press the SPACEBAR to select the protocol what you want.
6) Push <OK> button.
Configuration Complete appear.
7) Push <Save> button.
8) Press "F3" to exit.
9) Press Enter.
10) Edit the PROTOCOL.INI in C:\LANMAN.DOS, and set the "INTERRUPT"
and "IOBASE" under [NE2000_NIF]. Must match the NDCONF1 settings.
11) Reboot your computer.
This completes the installation procedure.
