[IBMTOKCS] Type = NDIS Title = "Token-Ring PCMCIA Network Adapters" Version = 1.0 DriverName = IBMTCS$ Xports = NETBEUI LANDD Copyfile = LTG.MSG, LTGH.MSG [FILE] Name = IBMTOKCS.OS2 Path = IBMCOM\MACS [EARLYRELEASE] display = "Early release" type = none default = "no" set = "yes","no" optional = yes editable = yes virtual = no help = "This parameter specifies the early token release option for Token-Ring 16/4 network adapter cards. The early token release option reduces the average time that another network adapter card must wait to gain access to the network. Network adapter cards that do not support the early token release option ignore this parameter." [ADAPTER] display = "Adapter Mode" type = string strlength = 9 default = PRIMARY set = "PRIMARY","ALTERNATE" optional = yes editable = yes virtual = no help = "This parameter identifies the network adapter card assignment if more than one Token-Ring network adapter card resides in the workstation. A value of PRIMARY denotes the first Token Ring network adapter card. A value of ALTERNATE denotes the second Token Ring Adapter card." [NETADDRESS] display = "Network adapter address" type = hexstring strlength = 12 range = 400000000000-7FFFFFFFFFFF optional = yes editable = yes virtual = no help = "This parameter overrides the network address of the network adapter card. The value of this parameter is a hexadecimal string of 12 digits, as in 400001020304. The address must be unique among all other network adapter addresses on the network. Specify the network adapter address in Token-Ring Network format." [MAXTRANSMITS] display = "Maximum number of queued transmits" type = decimal default = "6" range = 6-50 optional = yes editable = yes virtual = no help = "This parameter specifies the maximum number of transmit queue entries for the network adapter driver. For a server workstation or gateway workstation, set this parameter to the result of multiplying the Maximum Transmits Outstanding parameter against the Maximum Sessions parameter located in the NETBIOS protocol." [RECVBUFS] display = "Number of receive buffers" type = decimal default = "2" range = 2-60 optional = yes editable = yes virtual = no help = "This parameter specifies the number of receive buffers. Any memory left on the network adapter card after other storage requirements have been satisfied is configured as extra receive buffers." [RECVBUFSIZE] display = "Receive buffer size" type = decimal default = "256" range = 256-2040 step = 8 optional = yes editable = yes virtual = no help = "This parameter specifies the length of the data portion of each receive buffer in the shared RAM area of the adapter. It does not include the 8 bytes overhead needed by the adapter." [XMITBUFS] display = "Number of adapter transmit buffers" type = decimal default = "1" range = 1-16 optional = yes editable = yes virtual = no help = "This parameter specifies the number of transmit buffers to allocate on the network adapter card. Allocating a second transmit buffer may improve transmission performance, but it also reduces the amount of memory available for storing received packets." [XMITBUFSIZE] display = "Transmit buffer size" type = decimal range = 256-17952 step = 8 optional = yes editable = yes virtual = no help = "This parameter specifies the length of the data portion of each transmit buffer in the shared RAM area of the adapter. It does not include the 8 bytes overhead needed by the adapter, but includes the entire frame that is to be transmitted. The maximum size for the Token-Ring 16/4 Auto PCMCIA Adapter card is 4456 bytes at the 4-Mbits/sec (Mbps) adapter setting, and is 17,952 bytes at the 16-Mbps setting. If this parameter value is set too high for the adapter card, a configuration error occurs." [INTERRUPT] display = "System Interrupt Level" type = decimal set = 3,4,5,7,9,10,11 optional = yes editable = yes virtual = no help = "This parameter specifies the system interrupt level. This is the value that is requested of Card Services. It can be one of the following values: 3, 4, 5, 7, 9, 10, 11. This parameter is only used by the Token-Ring PCMCIA Adapter when using Card Services. The default value is 9." [PCMCIA] display = "PCMCIA mode" type = none default = yes set = yes,no optional = yes editable = yes virtual = no help = "This parameter specifies that the device driver should look for the presence of Card Services and register the driver if Card Services is present. This would be the standard mode if Card Services is on the target workstation. This tells the device driver not to search for an adapter but to go ahead and register with Card Services. This is only used in systems supporting Card Services and the Token-Ring PCMCIA Adapter. The default value is YES." [RAM] display = "Shared RAM address" type = hexadecimal range = C000 - DC00 step = 400 optional = yes editable = yes virtual = no help = "This parameter specifies the physical location of the adapter in the memory of the computer. The specified location must not conflict with that of any other adapter installed in the workstation. The value entered must be a hexadecimal number between C000 and DC00 and must be a multiple of 400." [AUTORINGSPEED] display = "Auto Ring Speed Mode" type = none default = yes set = yes,no optional = yes editable = yes virtual = no help = "This parameter is used when the ring speed for the LAN is unknown. The adapter senses the ring speed and adapts to the ring speed of the LAN." [RINGSPEED] display = "Default Ring Speed" type = decimal default = 4 set = 4,16 optional = no editable = yes virtual = no help = "This parameter specifies the ring speed that the Token-Ring PCMCIA Adapter should default to when the adapter is openned on the token ring. The value can be 4 or 16. The default value is 4. This parameter is only valid with the Token-Ring PCMCIA Adapter when using Card Services." [RAMSIZE] display = "Shared RAM Size" type = decimal set = 8,16,32,64 optional = yes editable = yes virtual = no help = "This parameter specifies the size of the Shared RAM window used by Card Services when allocating space for an Token-Ring PCMCIA adapter. This parameter will be the size of the Shared RAM that the workstation sees. The value can be 8, 16, 32, or 64. This parameter is only valid when using Card Services to allocate resources." [MMIO] display = "Memory Mapped IO/ROM address" type = hexadecimal range = C000 - DE00 step = 200 optional = yes editable = yes virtual = no help = "This parameter specifies the physical location of the adapter's Memory Mapped I/O and ROM memory in the memory of the computer. The specified location must not conflict with that of any other adapter installed in the workstation. The value entered must be a hexadecimal number between C000 and DE00 and must be a multiple of 200. This command is only valid with a Token-Ring PCMCIA Adapter when using Card Services 2.X."