Running ArtiSoft's Lantastic AI v5.0 with Accton EtherPocket adapter.

You need:  1. Lantasti AI v5.0
                    2. download AINDIS.EXE from ArtiSoft BBS. (602-884-8648).
                    3. Accton NDIS driver (Ethpock.dos) from Accton disk.

Details:       1. Install Lantastic AI v5.0 for NE2000 adapter.
                    2. unzip AINDIS.ZIP file and copy PROTMAN.DOS ,PROTMAN.EXE 
                       and AI-NDIS.EXE to \LANTASTI directory.
                       (where Lantastic is installed).
                    3. copy ETHPOCK.DOS file from Accton diskette to \LANTASTI 
                        directory.
                    4. Modify CONFIG.SYS file
                        add "DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI"
                        "DEVICE=C:\LANTASTI\ETHPOCK.DOS
                    5. Create PROTOCOL.INI file in \LANTASTI directory
                  
                        [PROTOCOL MANAGER]
                  
                        DRIVERNAME=PROTMAN$
                        DYNAMIC=YES
                  
                        [ACCTON]
                  
                        DRIVERNAME=ETHPOCK$
                        RECEIVEBUFSIZE=1024

                   6. Modify your STARTNET.BAT in LANTASTI directory  
              
                       Replace the line "AEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE"
                       with "AI-NDIS BIND_TO=ACCTON".



                    DONE.