Ethernet Family LAN adapter board drivers


This driver is used with Microsoft Windows NT Release 3.11, 3.5 for ISA
NE-Series Ethernet adapters. The drivers named NT2000 conform to the
Network Driver Interface Specification (NDIS) 3.0.

There are two files in this directory, one is the driver NT2000.SYS and
the other is installation information file OEMSETUP.INF.

────────────────────────────────────────────────────
Installing driver on Microsoft Windows NT
────────────────────────────────────────────────────

   1)  In the Main group of NT, choose the Control Panel icon.

   2)  In the Control Panel window, choose the Network icon.

   3)  In the Network Settings dialog box, choose the Add Adapter button.
       The Add Network Adapter dialog box appears.

   4)  In the list of network cards, select "<other> Requires disk from
       manufacturer", and then press <Enter> button.

   5)  Insert this driver disk in drive A, enter drive and pathname A:\WINNT
       and then choose the OK button.

   6)  In the Select OEM Option dialog box, you will see ISA NE-Series
       Adapter in the menu, use OK button to install it.

   7)  And then ISA NE-Series Network Card Setup dialog box appear, you
       must specify "IRQ level" and "I/O Port Address" of the adapter plugged
       in your PC. Because netcard detection function does not support
       in SETUP program, please make sure these setting matching your adapter's
       configurations. Otherwise the network ability of Windows NT can not
       work properly.

   8)  After that, installation is completed. This adapter becomes one
       of those Installed Adapter Cards and driver become one of those
       Installed Network Software. You can see: "[0x]ISA NE-Series Adapter"
       within Installed Adapter Cards menu and "ISA NE-Series Adapter
       Driver" within Installed Network Software menu.


   9)  Now, the SETUP program have already copied NT2000.SYS from A:\WINNT
       directory to C:\WINNT\SYSTEM32\DRIVERS and the OEMSETUP.INF form
       A:\WINNT to C:\WINNT\SYSTEM32 but renamed it to other installation
       information file. So next time, if you want to add another adapters
       to your system, you do not need floppy diskette again.

  10)  To complete network installation, remember binding the adapter to
       transport drivers by choosing "Bindings" button under Network Setting
       dialog box.

  11)  Restarting your system you will acquire network service.


Trademarks:
Microsoft Windows NT is a trademark of Microsoft Corporation.