Packet Driver Installation Guide for FTP PC/TCP
	 =====================================================

Introduction
============
    This document describes the procedure to install Packet Driver for
    AE-200PNP Ethernet Adapter.

    The PNPPD.COM program is complies with the FTP PC/TCP Packet driver
    Specifications.  This packet driver allow you to use The  AE-200PNP
    Ethernet Adapter with FTP PC/TCP software.

    FTP PC/TCP network OS doesn't support Plug&Play feature and if your
    computer does not support  PnP function also,  you must set the LAN
    card in "Jumperless" mode through our PNPSETUP program;  Otherwise,
    it can not work correctly.


Installation Procedures
=======================

    1. Execute the PNPPD.COM program by follows command line :

	    > PNPPD [options] [<SOFTWARE_INT>]

       OPTIONS:
       --------
	 -i - Force driver to report itself as 802.3 instead of Ethernet II.
	 -d - Delayed initialization.  Used for diskless booting
	 -n - NetWare conversion.  Converts 802.3 packets into 8137 packets
	 -w - Windows hack, obsoleted by winpkt
	 -p - Promiscuous mode disable
	 -h - Help
	 -u - Uninstall

       SOFTWARE_INT:
       -------------
	   Interrupt vector number, which can be decimal, hexadecimal or
	   octal format.
	   if:
		 decimal format -- from 96 to 128
		 hexadecimal ----- from 0x60 to 0x80
		 octal format ---- from 0140 to 0200

       Note: user can use default settings by only type "PNPPD". The
	     program will automatic search the Ethernet Adapter,
	     and uses its internal setting.


    2. Execute the \ETHDRV.EXE device program, which is provided by FTP
       with PC/TCP software package together.
       Now, your AE-200PNP Ethernet Adapter is work with FTP PC/TCP.


       Note: Except the FTP software's PC/TCP package, most of the DOS
	     version's TCP/IP software also can be run with packet driver.
	     Please refer to the software package installation for packet
	     driver install procedure.