;
; *******************************************************************
; *
; * DESCRIPTION: OEMSETUP.INF for Etherlink III (ISA, EISA, MCA)
; *
; * HISTORY:
; * v 1.0 - Microsoft Orginal file for only ELNK3 (ISA)
; * v 1.1 - Adapted to support EISA and MCA as well.
; * v 1.2 - Adapted to support Windows NT 3.5/3.51
; * v 1.3 - Changed DIR structure for setup in root
; * v 1.4 - Fixed 3CUNINSTALL registry entry
; * v 1.5 - added WinNT value to param keys
; *
; *******************************************************************
;
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
"Jazz-Internal Bus"
[Options]
ELNK3ISA509
ELNK3EISA
ELNK3MCA
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\elnk3.sys"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
MS_Manufacturer = "Microsoft"
Manufacturer = "3Com"
ProductMajorVersion = "3"
ProductMinorVersion = "51"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "Elnk3"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\elnk3.sys"
NetRuleSoftwareType = "elnk3Sys ndisDriver elnk3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Elnk3Sys"" yes no container"
NetRuleSoftwareClass = {"elnk3Driver basic"}
NetRuleSoftwareBindable = {"elnk3Driver elnk3Adapter non exclusive 100"}
ProductHardwareName = "elnk3"
NetRuleHardwareType = "elnk3 elnk3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"elnk3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
MS_ProductKeyName = $(!NTN_SoftwareBase)"\"$(MS_Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
ServiceKeyName = $(!NTN_ServiceBase)
GROUP_NAME = "3Com EtherLink III 3C5x9 Adapters"
ELNK3EISA_COMPRESSID = 5270864
ELNK3EISA_1BYTE = 2421189968
ELNK3EISA_MASK = 4043309055
ELNK3MCA_1BYTE = { 124, 125, 219, 246, 247 }
ELNK3MCA_2BYTE = { 98, 98, 97, 98, 98 }
NETCARD_ID = { 25212, 25213, 25051, 25334, 25335 }
[GeneralConstants]
!G:DebugOutputControl = 1
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
INF_PROCESSOR = "I386"
3CNUMBER = "ELNK3"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
;set Media = #("Source Media Descriptions", 1, 1)
set Media = #("Source Media Descriptions", 3, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set ActivateDetection = TRUE
ifstr(i) $(Option) != ELNK3ISA509
set StartLabel = ELNK3EISA&MCAconfigureadapter
else
set StartLabel = ELNK3ISA509configureadapter
endif
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the EtherLink III driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set ActivateDetection = TRUE
ifstr(i) $(Option) != ELNK3ISA509
set StartLabel = ELNK3EISA&MCAinstalladapter
else
set StartLabel = ELNK3ISA509installadapter
endif
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "oemsetup.inf: =================================================="
Debug-Output "oemsetup.inf: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "oemsetup.inf: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "oemsetup.inf: Option is: "$(Option)
Debug-Output "oemsetup.inf: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "oemsetup.inf: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "oemsetup.inf: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "oemsetup.inf: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "oemsetup.inf: =================================================="
Set DetectedCard = FALSE
Ifstr(i) $(ActivateDetection) != TRUE
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
Endif
; We don't do the Detection here for an ISA card, it's
; available via EISA, MCA, or PCI...
;
Ifstr(i) $(Option) != ELNK3ISA509
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
Endif
; Don't need to set the IOBase in install mode for ISA adapters.
;
ifstr(i) $(!NTN_InstallMode) != configure
goto SkipBuildTypeList
endif
;set Transceiver = 0
;Set TypeList = {{IRQ, IRQList, IRQValue},+
; {IOADDR, IOADDR_Addr_List, IOBaseAddrValue},+
; {TRANSCEIVER, TransceiverList_ignore, Transceiver}}
Set TypeList = {{IOADDR, IOADDR_Addr_List, IOBaseAddrValue}}
Debug-Output "oemsetup.inf: Calling Param_BuildTypeLists"
Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
Set Status = $($R0)
ifstr(i) $(Status) != STATUS_SUCCESSFUL
Goto fataldetect
Endif
Debug-Output "oemsetup.inf: Calling Param_SetDefaults"
Shell $(ParamInf) Param_SetDefaults {{IOADDR,768}}
Shell $(ParamInf) HexListFromDecList $(IOADDR_Addr_List)
Set IOADDR_Hex_List = $($R0)
;Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
;Set IRQList = $($R0)
Ifstr(i) $(!STF_NCDETECT) == YES
Ifstr(i) $(!STF_NCOPTION) == $(Option)
Set DetectedCard = TRUE
Debug-Output "oemsetup.inf: Setting DetectedCard to TRUE"
Endif
Endif
Shell "" DebugConfiguration "After parameter querying"
SkipBuildTypeList = +
Set from = $(fatal)
Set to = $(fatal)
Debug-Output "$(InfFile) $(Option): Jumping to $(StartLabel)"
Goto $(StartLabel)
;*******************************************************************************
;
; Etherlink III ISA Specific routines for the this .inf file.
;
;
ELNK3ISA509installadapter = +
Debug-Output "$(InfFile) $(Option): Installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
; @@1
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Set CurrParamSettings = {}
Ifstr(i) $(DetectedCard) != TRUE
Goto ELNK3ISA509adaptersetup2
Endif
StartWait
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto ELNK3ISA509adaptersetup2
Endif
Set DetectedParams = $($R1)
Debug-Output "oemsetup.inf: Calling Param_SetDefaults to merge detected params"
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto ELNK3ISA509adaptersetup2
ELNK3ISA509configureadapter = +
Debug-Output "$(InfFile) $(Option): Configureadapter"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrValue = $(ValueData)
;else-ifstr(i) $(ValueName) == "InterruptNumber"
; set IRQValue = $(ValueData)
;else-ifstr(i) $(ValueName) == "Transceiver"
; set Transceiver = $(ValueData)
;;************************************************************************************************
;; Specific to WinNT v3.5 and above..
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
;;************************************************************************************************
endif
EndForListDo
Shell $(ParamInf) Param_SaveValues
Set CurrParamSettings = $($R0)
Debug-Output "CurrParamSettings: $(CurrParamSettings)"
ELNK3ISA509adaptersetup = +
Debug-Output "$(InfFile) $(Option): AdapterSetup"
Shell "" DebugConfiguration "before displaying dialog"
Set from = ELNK3ISA509adapteroptions
Set IOADDR_Hex_Value = *($(IOADDR_Hex_List), ~($(IOADDR_Addr_List),$(IOBaseAddrValue)))
;set-add Transceiver = $(Transceiver),1
;set TransceiverValue = *($(TransceiverList), $(Transceiver))
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "oemsetup.inf: parameter confidence too low to bypass configuration"
Goto ELNK3ISA509adapteroptions
Endif
ELNK3ISA509adaptersetup2 = +
Ifstr(i) $(DetectedCard) == TRUE
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
Goto ELNK3ISA509adapterverify
Endif
Endif
ELNK3ISA509adapteroptions = +
Debug-Output "$(InfFile) $(Option): AdapterOptions"
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto ELNK3ISA509adapterverify
endif
Ifstr(i) $(!NTN_InstallMode) != configure
goto getbustype
Endif
read-syms FileDependentDlg$(!STF_LANGUAGE)
;Debug-Output "Combo1List: $(Combo1List)"
;Debug-Output "Combo2List: $(Combo2List)"
;Debug-Output "Combo3List: $(Combo3List)"
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOADDR_Hex_Value = $(Combo1Out)
Set IOBaseAddrValue = *($(IOADDR_Addr_List), ~($(IOADDR_Hex_List),$(IOADDR_Hex_Value)))
;set IRQValue = $(Combo2Out)
;set Transceiver = ~($(TransceiverList),$(Combo3Out))
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
Debug-Output "Action: unknown. Bye."
ui pop 1
goto end
endif
;;************************************************************************************************
;; Specific to WinNT v3.5 and above..
getbustype = +
ifstr(i) $(!STF_NCDETINFO) == {}
;;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;; Try to solve the problem of unacceptable BusType for ISA adapters...
;; The BusType of ISA is assigned 1 and the BusType of EISA is assigned 2.
tryagaingetbustype = +
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
ifint $(BusInterfaceType) == 1
goto ELNK3ISA509adapterverify
else-ifint $(BusInterfaceType) == 2
goto ELNK3ISA509adapterverify
else
set Error = "The Bus Type of 3Com EtherLink III (3c509) Adapter must be either ISA or EISA."
set from = end
set to = tryagaingetbustype
goto warning
endif
;;++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
else
set BusInterfaceType = *($(!STF_NCDETINFO),5)
set BusNumber = *($(!STF_NCDETINFO),6)
endif
;;************************************************************************************************
ELNK3ISA509adapterverify = +
Debug-Output "$(InfFile) $(Option): Adapterverify"
;Ifstr(i) $(!NTN_InstallMode) != configure
; Goto ELNK3ISA509skipoptions
;Endif
;set-sub Transceiver = $(Transceiver),1
Shell "" DebugConfiguration "after running dialog"
Ifstr(i) $(DetectedCard) != TRUE
Shell $(ParamInf) Param_SaveValues
Set NewParamSettings = $($R0)
Debug-Output "NewParamSettings: $(NewParamSettings)"
Ifstr(i) $(CurrParamSettings) == {}
Set DiffParamSettings = $(NewParamSettings)
Else
Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
Set DiffParamSettings = $($R0)
Endif
Debug-Output "oemsetup.inf: Calling Param_VerifyResources"
Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output "oemsetup.inf: Param_VerifyResources succeeded"
Goto ELNK3ISA509skipoptions
Endif
Else
Set CardVerifyIndex = $(!STF_NCDETCARD)
Debug-Output "oemsetup.inf: Calling Param_VerifyCard"
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output "oemsetup.inf: Param_VerifyCard succeeded"
Goto ELNK3ISA509skipoptions
Endif
Endif
Set from = ELNK3ISA509adapteroptions
Set to = ELNK3ISA509skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
ELNK3ISA509skipoptions =+
Debug-Output "$(InfFile) $(Option): SkipOptions"
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto ELNK3ISA509writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto ELNK3ISA509writeparameters
ELNK3ISA509writeparameters = +
Debug-Output "$(InfFile) $(Option): Write"
;Set NewValueList = {+
; {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
; {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
; {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
; {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
; {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
; {Transceiver,$(NoTitle),$(!REG_VT_DWORD),$(Transceiver)},+
; {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
Ifstr(i) $(!NTN_InstallMode) != configure
Set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
Else
Set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
Endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf), AddDefaultNetCardParameters, $(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
ifstr(i) $(!NTN_InstallMode) != configure
ifstr $(!STF_PLATFORM) == $(INF_PROCESSOR)
install "Install-3nicpace"
set CalledPace = "installpace"
goto paceentries
installpace = +
endif
endif
EndWait
goto successful
;*******************************************************************************
;
; Etherlink III EISA & MCA Specific routines for the this .inf file.
;
;
ELNK3EISA&MCAinstalladapter = +
Debug-Output "$(InfFile) $(Option): Installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
; @@1
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;CloseRegKey $(KeyProduct)
goto ELNK3EISA&MCAnextstep
ELNK3EISA&MCAconfigureadapter = +
Debug-Output "$(InfFile) $(Option): configadapter"
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
ELNK3EISA&MCAnextstep = +
Debug-Output "$(InfFile) $(Option): nextstep"
StartWait
ifstr(i) $(Option) == ELNK3EISA
set cardlist = {}
Shell $(UtilityInf), EISAFindBus, $(ELNK3EISA_1BYTE), $(ELNK3EISA_MASK)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
set cardlist = $($R1)
else
set cardlist = {}
Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),1), *($(ELNK3MCA_2BYTE),1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != {}
set cardlist = $($R1)
endif
Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),2), *($(ELNK3MCA_2BYTE),2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != {}
ifstr(i) $(cardlist) != {}
set cardlist = >($(cardlist),$($R1))
else
set cardlist = $($R1)
endif
endif
Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),3), *($(ELNK3MCA_2BYTE),3)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != {}
ifstr(i) $(cardlist) != {}
set cardlist = >($(cardlist),$($R1))
else
set cardlist = $($R1)
endif
endif
Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),4), *($(ELNK3MCA_2BYTE),4)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != {}
ifstr(i) $(cardlist) != {}
set cardlist = >($(cardlist),$($R1))
else
set cardlist = $($R1)
endif
endif
Shell $(UtilityInf), MCAFindBus, *($(ELNK3MCA_1BYTE),5), *($(ELNK3MCA_2BYTE),5)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != {}
ifstr(i) $(cardlist) != {}
set cardlist = >($(cardlist),$($R1))
else
set cardlist = $($R1)
endif
endif
endif
ifstr(i) $(cardlist) == {}
;set Error = $(CANNOT_FIND_ANY_CARD)
ifstr(i) $(Option) == ELNK3EISA
set Error = "Cannot find any 3Com Etherlink III (3c579) EISA Adapters."
else
set Error = "Cannot find any 3Com Etherlink III (3c529) MCA Adapters."
endif
set CommonStatus = STATUS_USERCANCEL
set from = "end"
goto nonfatal
endif
set AdapterList = $(cardlist)
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
ForListDo $(AdapterList)
set BusNum = *($($),1)
set SlotNum = *($($),2)
Ifstr(i) $(Option) == ELNK3MCA
set McaPosId = *($($),3)
endif
Debug-Output $(BusNum)
Debug-Output $(SlotNum)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(SlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Ifstr(i) $(Option) == ELNK3EISA
set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),2},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{EisaCompressedId,$(NoTitle),$(!REG_VT_DWORD),$(ELNK3EISA_COMPRESSID)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}
else
set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),3},+
{McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(McaPosId)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}
endif
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
EndForListDo
goto ELNK3EISA&MCAwriteparameters
ELNK3EISA&MCAwriteparameters = +
ifstr(i) $(!NTN_InstallMode) != configure
ifstr $(!STF_PLATFORM) == $(INF_PROCESSOR)
set CalledPace = "installpaceEISA"
goto paceentries
installpaceEISA = +
endif
endif
EndWait
goto successful
;*******************************************************************************
;
; Common routines for the entire .inf file.
;
;
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
Ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSOR)
RunProgram ExitCode "Windows Directory" "" UNELNK3.EXE "-inf"
endif
goto end
UpgradeSoftware = +
Debug-Output "Looking at Key: "$(ProductKeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
;
; Also update if Microsoft installed the driver.
;
Ifstr $(KeyProduct) == $(KeyNull)
Debug-Output "Looking at Key: "$(MS_ProductKeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(MS_ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
endif
Ifstr $(KeyProduct) != $(KeyNull)
ifstr $(!STF_PLATFORM) == $(INF_PROCESSOR)
set CalledPace = "updatepace"
goto paceentries
updatepace = +
endif
Debug-Output "Adding files to install list"
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
Debug-Output "Changing Reg Version Nubmers!"
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
paceentries = +
Debug-Output "Start paceentries."
;set NT key in registry so driver knows what operating system it is
OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(!REG_KEY_ALL_ACCESS) KeyNt
set LoopList = {1,2,3,4,5,6,7,8}
set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES}
ForListDo $(LoopList)
OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey
ifstr $(TestKey) != $(KeyNull)
SetRegValue $(TestKey) $(WinNTList)
endif
CloseRegKey $(TestKey)
EndForListDo
CloseRegKey $(KeyNt)
;end set NT key section
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt
set TrayIconList = {3CUNINSTALL,$(NoTitle),$(!REG_VT_SZ),$(3CNUMBER)}
SetRegValue $(KeyNt) $(TrayIconList)
set TrayIconList = {PACENAME,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)}
SetRegValue $(KeyNt) $(TrayIconList)
CloseRegKey $(KeyNt)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTPACEKEY
OpenRegKey $(SOFTPACEKEY) "" "3Com" $(!REG_KEY_WRITE) COMPACEKEY
ifstr $(COMPACEKEY) == ""
CreateRegKey $(SOFTPACEKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMPACEKEY
endif
OpenRegKey $(COMPACEKEY) "" "PACECards" $(!REG_KEY_WRITE) CARDPACEKEY
ifstr $(CARDPACEKEY) == ""
CreateRegKey $(COMPACEKEY) {"PACECards", 0, GenericClass} "" $(!REG_KEY_WRITE) "" CARDPACEKEY
endif
OpenRegKey $(CARDPACEKEY) "" "ELNK3" $(!REG_KEY_WRITE) ELNK3PACEKEY
ifstr $(ELNK3PACEKEY) == ""
CreateRegKey $(CARDPACEKEY) {"ELNK3", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ELNK3PACEKEY
endif
SetRegValue $(ELNK3PACEKEY) {"Description", 0, $(!REG_VT_SZ), $(GROUP_NAME)}
OpenRegKey $(CARDPACEKEY) "" "Applications" $(!REG_KEY_WRITE) APPPACEKEY
ifstr $(APPPACEKEY) == ""
CreateRegKey $(CARDPACEKEY) {"Applications", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPPACEKEY
endif
OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"87C7"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"87C8"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"0453"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"0455"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "InSoft Communique!" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"InSoft Communique!", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1025, 1500"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1050, 1525"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"4050"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4082"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"06a4"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"06d6"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Precept FlashWare" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Precept FlashWare", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Progressive Networks RealAudio" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Progressive Networks RealAudio", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"6970"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7170"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Starlight Networks StarCast" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Starlight Networks StarCast", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1911"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1911"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "VCON Cruiser 100" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"VCON Cruiser 100", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "VXtreme Web Theater" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"VXtreme Web Theater", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"7000"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7020"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Xing Technology Streamworks" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Xing Technology Streamworks", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1558"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1558"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
OpenRegKey $(APPPACEKEY) "" "Vosaic Software Server" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Vosaic Software Server", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"TCP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"04D3"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"04D3"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
OpenRegKey $(APPPACEKEY) "" "Vosaic Software Client" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Vosaic Software Client", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"F169"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"F17D"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
CloseRegKey $(ELNK3PACEKEY)
CloseRegKey $(APPPACEKEY)
CloseRegKey $(CARDPACEKEY)
CloseRegKey $(COMPACEKEY)
CloseRegKey $(SOFTPACEKEY)
goto $(CalledPace)
[DebugConfiguration]
Set InfName = "Oemsetup.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
Debug-Output $(InfName)"Adding files: Files-$(Option), SrcDir=$(SrcDir)"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)WIN32\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-3nicpace]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-3nicpace $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
Debug-Output $(InfName)"Adding files: Files-$(Option), SrcDir=$(SrcDir)"
ifstr $(!STF_PLATFORM) == $(INF_PROCESSOR)
AddSectionFilesToCopyList Files-3nicpace $(SrcDir)win32 $(!STF_WINDOWSSYSPATH)
endif
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)WIN32\$(!STF_PLATFORM) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Windows NT Setup Disk #1" , TAGFILE = disk1
2 = "Windows NT Setup CD-ROM Disk" , TAGFILE = disk2
3 = "3Com Etherdisk for Etherlink III", TAGFILE = 3c5x9cfg.exe
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
;3, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-Inf]
3, oemsetup.inf, SIZE=45000, BACKUP=*, RENAME=oemnade3.inf
3, oemsetup.inf, SIZE=45000, BACKUP=*, RENAME=oemnadee.inf
3, oemsetup.inf, SIZE=45000, BACKUP=*, RENAME=oemnaden.inf
[Files-3nicpace]
3,pacecfg.cpl, SIZE=208384
3,pacecfg.hlp, SIZE=18072
3,UNELNK3.EXE, SIZE=6617
[Files-ELNK3ISA509]
3,ELNK3.SYS , SIZE=42496
[Files-ELNK3EISA]
3,ELNK3.SYS , SIZE=42496
[Files-ELNK3MCA]
3,ELNK3.SYS , SIZE=42496
[LanguagesSupported]
ENG
[OptionsTextENG]
ELNK3ISA509 = "3Com Etherlink III (3c509) ISA Adapter"
ELNK3EISA = "3Com Etherlink III (3c579) EISA Adapter"
ELNK3MCA = "3Com Etherlink III (3c529) MCA Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "3Com Etherlink III Adapter Card Setup"
ProductSoftwareDescription = "3Com Etherlink III Adapter Driver"
ProductSoftwareTitle = "3Com Etherlink III Adapter Driver"
ProductHardwareELNK3ISA509Title = "3Com Etherlink III (3c509) ISA Adapter"
ProductHardwareELNK3ISA509Description = "3Com Etherlink III (3c509) ISA Adapter"
ProductHardwareELNK3EISATitle = "3Com Etherlink III (3c579) EISA Adapter"
ProductHardwareELNK3EISADescription = "3Com Etherlink III (3c579) EISA Adapter"
ProductHardwareELNK3MCATitle = "3Com Etherlink III (3c529) MCA Adapter"
ProductHardwareELNK3MCADescription = "3Com Etherlink III (3c529) MCA Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
TransceiverList = {"10 Base T", "Thick Net (AUI/DIX)", "Thin Net (BNC/COAX)"}
TransceiverDisplayList = {"10 Base T", "Thick Net (AUI/DIX)", "Thin Net (BNC/COAX)"}
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Label1 = "I/O &Port Address:"
;Label2 = "&Interrupt Number:"
;Label3 = "&Transceiver Type:"
;DlgType = "Combination"
;DlgTemplate = "UBNDIS"
DlgType = "MultiCombo"
DlgTemplate = "SINGLE_COMBO"
Caption = $(FunctionTitle)
Combo1List = $(IOADDR_Hex_List)
Combo1Out = $(IOADDR_Hex_Value)
;Combo2List = $(IRQList)
;Combo2Out = $(IRQValue)
;Combo3List = $(TransceiverDisplayList)
;Combo3Out = $(TransceiverValue)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO}
HelpContext = $(!IDH_DB_OEMNADE3_INS)
