Metropoli BBS
VIEWER: read.me MODE: TEXT (CP437)
┌───────────────────────────────────────────────────────────────┐
│	  Novell NetWare Versions 386 DOS ODI Driver		│
│			 Installation				│
│								│
│								│
│      Copyright 1992, 1993 ACCTON Technology Corporation	│
│		      All rights reserved.			│
└───────────────────────────────────────────────────────────────┘

1.   Things You Need
     ───────────────
	Before you start with the installation process make sure you have
	the following :

	   a.	 Ethernet Pocket Hardware Driver Disk.
	   b.	 Novell DOS ODI WORKSTATION SERVICES diskette(WSGEN).

2.   How To Install
     ──────────────
	You need following five files to install DOS ODI DRIVER.

	   a. LSL.COM		---- supported by Novell
	   b. PEMLID.COM	---- Novell DOS ODI Driver ,supported
				     by manufacturer
	   c. IPXODI.COM	---- supported by Novell
	   d. NETx.COM		---- supported by Novell
		   or
	      EMSNETx.EXE
		   or
	      XMSNETx.EXE

	   e. NET.CFG		---- optional,configuration file

	After boot your workstation, type following comments on the console:

		LSL		<Enter>
		PEMLID		<Enter>
		IPXODI		<Enter>
		NETx		<Enter>

	then,you can log in to the file server.

	Normally,  you will not need a NET.CFG file  because the PEMLID.COM
	can automatically detect hardware configurations. As a resault, you
	don't need to  assign the INT, PORT  etc parameters.  Although  you
	don't to assign parameters which has been described above,  you can
	still assign another parameters,for example, FRAME, NODE ADDRESS ..
	etc.  You  can	see  Netware 386  Installation	appendix E for more
	information about NET.CFG.

	Bellow is a sample NET.CFG file:

		LINK DRIVER PEMLID
		    Frame Ethernet_II
		    Frame Ethernet_802.3
		    Protocol IPX 0 Ethernet_802.3
		       :
		       :

=======================================================================

History:

	1: 02/11/1993 Version V1.07:

	   .Fixed up the bug for  Novell Netware, DOS ODI drivers
	    cannot run DOS PROMPT session very well on MS WINDOW
	    3.1 386 enhanced mode.
	    (Support R01, R02 hardware with the same driver)
	    (Without using TICK to check if interrupt coming)

	   .Speed up performance at least 15 k bps.
	    (Not the default value)

	   .Add parameter switch /t1, /t2 to select faster speed mode.

	2: 06/14/1993 Version V1.08:
	   .Fixed up the bug when run at INTEL 486 machine.
	   .Speed up performance at least 15 k bps.
	    (The default value)

			  ----the end----

=======================================================================

Novell,  NetWare,  Novell  Advanced  NetWare	are    registered
trademarks   of   Novell Incorporated.	Ethernet  is   registered
trademark  of  Xerox  Corporation. Other trademarks orbrand names
unintentionally omitted are  trademarks or registered  trademarks
of their respective companies.

=======================================================================

[ RETURN TO DIRECTORY ]