Metropoli BBS
VIEWER: readme.txt MODE: TEXT (CP437) 

┌───────────────────────────────────────────────────────────────┐
│		  ACCTON TECHNOLOGY CORPORATION 		│
│	ETHERPOCKET LAN MANAGER DRIVER INSTALLATION GUIDE	│
│								│
│		     08/19/1993 VERSION 2.11			│
│								│
│	Copyright 1989-1993 ACCTON Technology Corporation	│
│		      All rights reserved.			│
└───────────────────────────────────────────────────────────────┘

The drivers contained in this diskette are for the following
ACCTON EtherPocket lan adapters:

	┌────────────────────────────────────────────┐
	│   Product Name	    Product Number   │
	├────────────────────────────────────────────┤
	│  EtherPocket-10T	       EN2201	     │
	│  EtherPocket-CX	       EN2202	     │
	│  EtherPocket-Duo	       EN2209	     │
	└────────────────────────────────────────────┘


They are used with 3Com 3+Open, Microsoft OS/2 LAN Manager OEM
distribution, Release 1.x or 2.x,  and	other  compatible  OEM
versions of LAN Manager.  The drivers named ETHPOCK conform to
the Network Driver Interface Specification (NDIS) defined by
Microsoft/3Com.



1.  DOS LAN REQUESTER
-------------------------------------
  a. At the DOS prompt, insert the IBM LAN Support Program (LSP)
     Version 1.30 (or 1.31) Diskette into your disk drive. (A: or B: )

  b. Type dxmaid at A:\> prompt , then press <Enter>.
     The IBM logo appear , press <Enter>.

  c. Press <Enter> twice.

     The Environment Information screen appears.

  d. Specify the following values for the fields on this screen:


       Use the <Space Bar> to toggle between choices:

	    Configuration for this computer?	      Yes
	    Use existing configuration information?	Yes
	    Do you have adapter option diskettes?     Yes
	    Are you configuring for two adapters?     No
	    Do you need 802.2 interface support?     Yes

       Type change as need to drive and directory information below:

	    Source for LSP		       A:\
	    Target for new configuration       C:\lsp

  e. Make sure the value are correct. Press <Enter> to store your choices.

     Process Adapter Option Diskette screen appear.

  g. Insert the Driver Diskette in your source drive and specify the
     path: A:\NDIS(or b:\). Then press <Enter>.

  g. The necessary files are copied from the Driver Diskette to your
     target directory on the hard disk.

  g. Press <Enter> three times.

  h. Insert the LSP diskette and press <Enter>.

     The Current Configuration screen appears with the Accton EN220X
     series adapter and protocols already selected ("IBM IEEE 802.2"
     and "IBM OS/2 NETBIOS").

  i. Press F4. LSP is installed completely.

  j. Use a text editor to edit the config.sys file. Specify at least
      20 files in the FILES= line, like this:

	      FILES=20

      Once you have saved the config.sys file, reset the computer.

  k. Insert the DOS LAN Requester Install Diskette 1.

  l. Type: install. Press <Enter>.
     IBM logo appears, press <Enter>.

  m. Press <Enter> twice more.

      The program prompts you for the pathname of the DOS LAN
      Requester directory.

  n. Specify the pathname for the DOS LAN Requester directory.
      (C:\DOSLAN is the default.)  Press <Enter>.

      The program asks you which services you require.

  o. Highlight either the "Send messages" or "Send, View, Edit, and
      Log messages" option. (Normally, you select the second option.)
      Press <Enter> to confirm your choice.

  p. Specify the machine's ID and the domain ID. The domain ID must
      be the domain server ID and must be the same for all
      workstations on the network.

  q. Follow the prompts to complete the installation.


2.   OS/2 LAN Server
----------------------

  a. Copy ETHPOCK.OS2 & EN220x.NIF from a:\NDIS to c:\ibmcom\macs.

  b. Push "OS/2 LAN Service"  icon.

  c. Push "Installation and configuration" icon.
     IBM logo appear.

  d. Press <OK>.
  e. Select <advance> , press <Enter>.

  f. Select " Install or Configuration this Workstation".

  g. Select server type (add server or domain controller).
     " install or remove " appear.

  h. Select "Configure a component".

  i. Select "LAN Adapter and protocol support" .

  j. Push "configure" button.

  k. Select "Configure workstation".

  l. Select "Accton EN220x Ethernet adapter" in Network Adapter dialog press
     <Add> button, and select 802.2 press <Add> IBM NETBIOS press <Add>
      ,then press <OK>.

  m. Press <OK> four times.

  n. Press <OK> to backup old config.sys & autoexec.bat and create new config.sys
     and autoexec.bat.

  o. Shutdown the computer and restart it.
-- THE END --

[ RETURN TO DIRECTORY ]