┌───────────────────────────────────────────────────────────────┐
│		  ACCTON TECHNOLOGY CORPORATION 		│
│	ETHERPOCKET LAN MANAGER DRIVER INSTALLATION GUIDE	│
│								│
│		     08/19/1993 VERSION 2.11			│
│								│
│	Copyright 1989-1993 ACCTON Technology Corporation	│
│		      All rights reserved.			│
└───────────────────────────────────────────────────────────────┘

The drivers contained in this diskette are for the following
ACCTON EtherPocket lan adapters:

	┌────────────────────────────────────────────┐
	│   Product Name	    Product Number   │
	├────────────────────────────────────────────┤
	│  EtherPocket-10T	       EN2201	     │
	│  EtherPocket-CX	       EN2202	     │
	│  EtherPocket-Duo	       EN2209	     │
	└────────────────────────────────────────────┘


They are used with 3Com 3+Open, Microsoft OS/2 LAN Manager OEM
distribution, Release 1.x or 2.x,  and	other  compatible  OEM
versions of LAN Manager.  The drivers named ETHPOCK conform to
the Network Driver Interface Specification (NDIS) defined by
Microsoft/3Com.



1. Installation Procedure for LAN Manager V2.0
--------------------------------------------------
 a. Type Setup In Lan Manager Directory. Press <Enter>.

 b. Press <Enter>.

 c. Choice "Import Network Drivers..." in "Action". Press <Enter>.

 d. Type the specific source driver. (A:\> or B:\>).

 e. Insert Driver Disk in specific drive. (A:\> or B:\>). Press <Enter>.
    Import Network Drivers appear.

 f. Press the <SPACEBAR> to select Network Adapter Card, "Accton EN220x
    Adapter Card" . Press <Enter>.

 g. Press <NO> button.

 h. Press <Enter> three times.
    Network Driver appear.

 i. Choice Accton EN220x Ethernet Card in Network Adapter Cards select menu
    , then press <Add driver> button, and press <Add protocol>, press <OK>.
    Workstation Primary parameters appear, press <OK>.

 k. Press <OK> three times.

 l. Choice "Save" in "Action".

 m. Press <F3> to Exit.

*******************************************************************************



2. Installation Introduction for LAN Manager V2.1
--------------------------------------------------
 a. Type lmsetup In LanManager Directory. Press Enter.
    Microsoft LAN Manger Setup appear.

 b. Choice "Network Drivers..." in " Configuration ". Press Enter.

 c. Choice <Add New Configs> ,press Enter.
    Network Adapter Driver appears.

 d. Choice <Other Driver> , press Enter.

 e. Insert the Driver Disk to specified drive (A:\> or B:\>),key in the specified
    drive (A:\> or B:\>),then push <OK> button.

 f. Select a available Network Adapter Driver, Accton EN220x Ethernet adapter.
    Push <OK> button.

 g. Press the SPACEBAR to select the protocol what you want.

 h. Push <OK> button.
    Configuration Complete appear.

 i. Push <Save> button.

 j. Press "F3" to exit.

 k. Press Enter.


Sample configuration files:

3. Config.sys

   a. <V2.0>
      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50\e:1000 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\DOS50\SETVER.EXE
      DOS=HIGH,UMB

      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\ACCNE\ETHPOCK.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS


    b.<V2.1>
      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50\e:1000 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS
      DEVICE=C:\DOS50\SETVER.EXE
      DOS=HIGH,UMB

      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\ACCNE\ETHPOCK.DOS


4. Protocol.ini file for LAN Manager.

  a. V2.0
       [PROTOCOL MANAGER]
	DRIVERNAME = PROTMAN$

       [NETBEUI_XIF]
	Drivername = netbeui$
	BINDINGS = "ACCNE_NIF"

       [ACCNE_NIF]
       ; PROTOCOL.INI for Accton EN220x ethernet adapter

	  drivername = ETHPOCK$

       ; End of this sample file



   b. V2.1
       [PROTMAN]
	DRIVERNAME = PROTMAN$
	DYNAMIC = YES
	PRIORITY = NETBEUI

       [NETBEUI_XIF]
	Drivername = netbeui$
	SESSIONS = 6
	NCBS = 12
	BINDINGS = "ACCNE_NIF"
	LANABASE = 0

       [ACCNE_NIF]
       ; PROTOCOL.INI for Accton EN220x ethernet adapter

	  drivername = ETHPOCK$

       ; End of this sample file



5. Autoexec.bat file for LAN Manager.

   a. V2.0

   @echo off
   PROMPT $P$G
   PATH=c:\PE2;C:\DOS50;C:\NC;
   APPEND=C:\PE2;C:\DOS50;
   REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES ===== LANMAN 2.0 ====
   SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
   C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
   NET START WORKSTATION
   REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES ===== LANMAN 2.0 ====

   b. V2.1
   @echo off
   PROMPT $P$G
   PATH=c:\PE2;C:\DOS50;C:\NC;
   APPEND=C:\PE2;C:\DOS50;

   @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES === LANMAN 2.1 ===
   SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
   NET START WORKSTATION
   LOAD NETBEUI
   @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES === LANMAN 2.1 ===
-- THE END --