; Protocol.ini section for Olicom Ethernet ISA Adapter

DRIVERNAME = OCE1X$
Ioaddress = 0x300
;Interrupt = 3
;Topo= 2
;NoLink
;RPL

; DRIVERNAME options: OCE1X$, OCE1X2$... OCE1X9$, where OCE1X2$ is the
;		      name of the second loaded driver etc. Uppercase is
;		      significant.
; Ioaddress  options: 0x240,0x280,0x2c0,0x300,0x320,0x340,0x360
; Interrupt  options: 3,4,5,(7),9,10,11,(12),15
;                     For OC-212X Adapters with parallel processing IRQ 12 is
;                     supported, but not IRQ 7.
;                     For OC-212X Adapters without parallel processing IRQ 7 is
;                     supported, but not IRQ 12.
; Topo	     options: 1: Thick Ethernet(10BASE5)(AUI), or FIBER
;		      2: Thin Ethernet(10BASE2)
;		      3: TPI (10BASE-T)
;		      4: TPI (Reduced Squelch level)
; NoLink              Disable link integrity checking (Only TPI)
; RPL                 To be used with Remote Program Load (RPL)
;
; NOTE: Interrupt, Topo and NoLink parameters are optional.
;       For Olicom Ethernet ISA Adapters with only one connector the Topo
;       parameter will be ignored.