;- Internal Version 2.01
VER: 1.00
SYN: 1.00
; file: TPRO.LDI
; Intel TokenExpress(TM) ISA Token Ring Adapter
; Help file for NetWare LAN driver
Driver TPRO
{
Description: $TPRO_DES
Help: $TPRO_DRVHLP
PAR: 1.00
File: TPRO.LAN
PROMPT PORT
if (BUS != MCA) REQUIRED
else HIDDEN
{
Values: 300,310,320,330,340,350,360,370,380,390,
200,210,220,230,240,250,260,280,290,2A0,2B0,2C0,2D0,2E0,2F0
ReservedLength: 16
Default: 300
Help: $TPRO_PORTHLP
}
FRAME FrameSelect
{
Help: $TPRO_FRMHLP
CDescription: $TPRO_1
Choice: 'Token-Ring'
CDescription: $TPRO_2
Choice: 'Token-Ring_SNAP'
Default: 1
OCT: MSB
}
PROMPT NODE
{
HELP: $TPRO_NODEHLP
}
}
Driver TPROPnP
{
Description: $TPRO_PNP_DES
Help: $TPRO_DRVHLP
File: TPRO.LAN
PROD: 'PNPISA.INCLUDE.INT.102.*'
Par: 2.00
PROMPT SLOT
if (BUS == PNPISA) REQUIRED
else HIDDEN
{
Help: $TPRO_SLOTHLP
}
FRAME FrameSelect
{
Help: $TPRO_FRMHLP
CDescription: $TPRO_1
Choice: 'Token-Ring'
CDescription: $TPRO_2
Choice: 'Token-Ring_SNAP'
Default: 1
OCT: MSB
}
}
DLANG: 4
;English
$TPRO_1 = "TOKEN-RING"
$TPRO_2 = "TOKEN-RING_SNAP"
$TPRO_DES = "Intel TokenExpress(TM) PRO Adapter"
$TPRO_PNP_DES = "Intel TokenExpress(TM) PRO Adapter with PnP enabled"
$TPRO_DRVHLP = "This server driver (TPRO.LAN) supports Intel
TokenExpress(TM) PRO ISA Adapters."
$TPRO_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver re-entrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequenses of such a change."
$TPRO_NODEHLP = "Do not change the adapters node address unless you are
prepared to administer local node addresses. If not
specified, the adapter will use the globally assigned
Burned In Address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$TPRO_PORTHLP = "Select the port value (base I/O address) that corresponds to
the port address setting on the adapter.\n\n
Make sure the block of I/O addresses does not overlap addresses
of other devices in the machine."
$TPRO_SLOTHLP = "This is the slot value that indicates the Intel TokenExpress(TM)
ISA LAN Adapter. This value should be filled in by the Novell
installation utility when it scans for Plug and Play adapters."
LANG: 6
;French
$TPRO_1 = "TOKEN-RING"
$TPRO_2 = "TOKEN-RING_SNAP"
$TPRO_DES = "Intel TokenExpress(TM) PRO Adapters"
$TPRO_PNP_DES = "Intel TokenExpress(TM) PRO Adapter with PnP enabled"
$TPRO_DRVHLP = "This server driver (TPRO.LAN) supports Intel
TokenExpress(TM) PRO ISA Adapters."
$TPRO_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver re-entrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequenses of such a change."
$TPRO_NODEHLP = "Do not change the adapters node address unless you are
prepared to administer local node addresses. If not
specified, the adapter will use the globally assigned
Burned In Address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$TPRO_PORTHLP = "Select the port value (base I/O address) that corresponds to
the port address setting on the adapter.\n\n
Make sure the block of I/O addresses does not overlap addresses
of other devices in the machine."
$TPRO_SLOTHLP = "This is the slot value that indicates the Intel TokenExpress(TM)
ISA LAN Adapter. This value should be filled in by the Novell
installation utility when it scans for Plug and Play adapters."
LANG: 7
;German
$TPRO_1 = "TOKEN-RING"
$TPRO_2 = "TOKEN-RING_SNAP"
$TPRO_DES = "Intel TokenExpress(TM) PRO Adapters"
$TPRO_PNP_DES = "Intel TokenExpress(TM) PRO Adapter with PnP enabled"
$TPRO_DRVHLP = "This server driver (TPRO.LAN) supports Intel
TokenExpress(TM) PRO ISA Adapters."
$TPRO_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver re-entrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequenses of such a change."
$TPRO_NODEHLP = "Do not change the adapters node address unless you are
prepared to administer local node addresses. If not
specified, the adapter will use the globally assigned
Burned In Address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$TPRO_PORTHLP = "Select the port value (base I/O address) that corresponds to
the port address setting on the adapter.\n\n
Make sure the block of I/O addresses does not overlap addresses
of other devices in the machine."
$TPRO_SLOTHLP = "This is the slot value that indicates the Intel TokenExpress(TM)
ISA LAN Adapter. This value should be filled in by the Novell
installation utility when it scans for Plug and Play adapters."
LANG: 8
;Italian
$TPRO_1 = "TOKEN-RING"
$TPRO_2 = "TOKEN-RING_SNAP"
$TPRO_DES = "Intel TokenExpress(TM) PRO Adapters"
$TPRO_PNP_DES = "Intel TokenExpress(TM) PRO Adapter with PnP enabled"
$TPRO_DRVHLP = "This server driver (TPRO.LAN) supports Intel
TokenExpress(TM) PRO ISA Adapters."
$TPRO_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver re-entrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequenses of such a change."
$TPRO_NODEHLP = "Do not change the adapters node address unless you are
prepared to administer local node addresses. If not
specified, the adapter will use the globally assigned
Burned In Address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$TPRO_PORTHLP = "Select the port value (base I/O address) that corresponds to
the port address setting on the adapter.\n\n
Make sure the block of I/O addresses does not overlap addresses
of other devices in the machine."
$TPRO_SLOTHLP = "This is the slot value that indicates the Intel TokenExpress(TM)
ISA LAN Adapter. This value should be filled in by the Novell
installation utility when it scans for Plug and Play adapters."
LANG: 14
;Spanish
$TPRO_1 = "TOKEN-RING"
$TPRO_2 = "TOKEN-RING_SNAP"
$TPRO_DES = "Intel TokenExpress(TM) PRO Adapters"
$TPRO_PNP_DES = "Intel TokenExpress(TM) PRO Adapter with PnP enabled"
$TPRO_DRVHLP = "This server driver (TPRO.LAN) supports Intel
TokenExpress(TM) PRO ISA Adapters."
$TPRO_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver re-entrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequenses of such a change."
$TPRO_NODEHLP = "Do not change the adapters node address unless you are
prepared to administer local node addresses. If not
specified, the adapter will use the globally assigned
Burned In Address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$TPRO_PORTHLP = "Select the port value (base I/O address) that corresponds to
the port address setting on the adapter.\n\n
Make sure the block of I/O addresses does not overlap addresses
of other devices in the machine."
$TPRO_SLOTHLP = "This is the slot value that indicates the Intel TokenExpress(TM)
ISA LAN Adapter. This value should be filled in by the Novell
installation utility when it scans for Plug and Play adapters."
