;DrIvEr DeScRiPtIoN
SyntaxVersion: 1.00
;- Internal Version 1.57
;- File: IBMFE.LDI
;- IBM 100/10 EtherJet PCI Installation Information File
Driver IBMFE
{
Description: $IBMFE_1
Help: $IBMFE_2
File: IBMFE.LAN
Prod: PCI.8086.1229.1014.*.*
Prod: PCI.8086.1229.0000.0000.01
PAR: 2.00
PROMPT SLOT OPTIONAL
{
Help: $IBMFE_3
Type: DECIMAL (5)
Values: 1 - 65535
Default: UNDEFINED
}
PROMPT SPEED OPTIONAL
{
Help: $IBMFE_4
Type: DECIMAL (3)
Values: 0, 10, 100
Default: 0
Out: 'SPEED=%s'
}
PROMPT FORCEDUPLEX OPTIONAL
{
Help: $IBMFE_5
Type: DECIMAL (1)
Values: 0, 1, 2
Default: 0
Out: 'FORCEDUPLEX=%s'
}
PROMPT IOMAPMODE OPTIONAL
{
Help: $IBMFE_6
Type: DECIMAL (1)
Values: 0, 1
Default: 0
Out: 'IOMAPMODE=%s'
}
FRAME FrameSelect
{
Help: $IBMFE_7
CDescription: $IBMFE_8
Choice: 'Ethernet_802.3'
CDescription: $IBMFE_9
Choice: 'Ethernet_802.2'
CDescription: $IBMFE_10
Choice: 'Ethernet_SNAP'
CDescription: $IBMFE_11
Choice: 'Ethernet_II'
Default: 1,2
}
}
DLANG: 4
;English
$IBMFE_1 = "IBM 100/10 EtherJet PCI Adapter"
$IBMFE_2 = "This driver supports the IBM 100/10 EtherJet PCI Adapter"
$IBMFE_3 = "Slot number for the adapter.\n
For PCI adapters, this refers to the Device Location."
$IBMFE_4 = "Line speed override for the adapter. Disables
auto-negotiation. Must be forced if duplex mode is specified.\n
Valid options are 0 (Auto), 10, or 100."
$IBMFE_5 = "Force the operating mode to Full Duplex.\n
SPEED must be specified and valid for this keyword.\n
Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."
$IBMFE_6 = "Force the driver to use I/O mapped mode.\n
The default mode is memory-mapped.\n
Valid options are 0 (DEFAULT) or 1."
$IBMFE_7 = "The driver defaults to 802.2 frame format. You
may use this default to select from the other 3
options => 802.3, Ethernet II and Ethernet SNAP."
$IBMFE_8 = "IBMFE 802.3"
$IBMFE_9 = "IBMFE 802.2"
$IBMFE_10 = "IBMFE SNAP"
$IBMFE_11 = "IBMFE E_II"
LANG: 6
;French
$IBMFE_1 = "IBM 100/10 EtherJet PCI Adapter"
$IBMFE_2 = "This driver supports the IBM 100/10 EtherJet PCI Adapter"
$IBMFE_3 = "Slot number for the adapter.\n
For PCI adapters, this refers to the Device Location."
$IBMFE_4 = "Line speed override for the adapter. Disables
auto-negotiation. Must be forced if duplex mode is specified.\n
Valid options are 0 (Auto), 10, or 100."
$IBMFE_5 = "Force the operating mode to Full Duplex.\n
SPEED must be specified and valid for this keyword.\n
Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."
$IBMFE_6 = "Force the driver to use I/O mapped mode.\n
The default mode is memory-mapped.\n
Valid options are 0 (DEFAULT) or 1."
$IBMFE_7 = "The driver defaults to 802.2 frame format. You
may use this default to select from the other 3
options => 802.3, Ethernet II and Ethernet SNAP."
$IBMFE_8 = "IBMFE 802.3"
$IBMFE_9 = "IBMFE 802.2"
$IBMFE_10 = "IBMFE SNAP"
$IBMFE_11 = "IBMFE E_II"
LANG: 7
;German
$IBMFE_1 = "IBM 100/10 EtherJet PCI Adapter"
$IBMFE_2 = "This driver supports the IBM 100/10 EtherJet PCI Adapter"
$IBMFE_3 = "Slot number for the adapter.\n
For PCI adapters, this refers to the Device Location."
$IBMFE_4 = "Line speed override for the adapter. Disables
auto-negotiation. Must be forced if duplex mode is specified.\n
Valid options are 0 (Auto), 10, or 100."
$IBMFE_5 = "Force the operating mode to Full Duplex.\n
SPEED must be specified and valid for this keyword.\n
Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."
$IBMFE_6 = "Force the driver to use I/O mapped mode.\n
The default mode is memory-mapped.\n
Valid options are 0 (DEFAULT) or 1."
$IBMFE_7 = "The driver defaults to 802.2 frame format. You
may use this default to select from the other 3
options => 802.3, Ethernet II and Ethernet SNAP."
$IBMFE_8 = "IBMFE 802.3"
$IBMFE_9 = "IBMFE 802.2"
$IBMFE_10 = "IBMFE SNAP"
$IBMFE_11 = "IBMFE E_II"
LANG: 8
;Italian
$IBMFE_1 = "IBM 100/10 EtherJet PCI Adapter"
$IBMFE_2 = "This driver supports the IBM 100/10 EtherJet PCI Adapter"
$IBMFE_3 = "Slot number for the adapter.\n
For PCI adapters, this refers to the Device Location."
$IBMFE_4 = "Line speed override for the adapter. Disables
auto-negotiation. Must be forced if duplex mode is specified.\n
Valid options are 0 (Auto), 10, or 100."
$IBMFE_5 = "Force the operating mode to Full Duplex.\n
SPEED must be specified and valid for this keyword.\n
Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."
$IBMFE_6 = "Force the driver to use I/O mapped mode.\n
The default mode is memory-mapped.\n
Valid options are 0 (DEFAULT) or 1."
$IBMFE_7 = "The driver defaults to 802.2 frame format. You
may use this default to select from the other 3
options => 802.3, Ethernet II and Ethernet SNAP."
$IBMFE_8 = "IBMFE 802.3"
$IBMFE_9 = "IBMFE 802.2"
$IBMFE_10 = "IBMFE SNAP"
$IBMFE_11 = "IBMFE E_II"
LANG: 14
;Spanish
$IBMFE_1 = "IBM 100/10 EtherJet PCI Adapter"
$IBMFE_2 = "This driver supports the IBM 100/10 EtherJet PCI Adapter"
$IBMFE_3 = "Slot number for the adapter.\n
For PCI adapters, this refers to the Device Location."
$IBMFE_4 = "Line speed override for the adapter. Disables
auto-negotiation. Must be forced if duplex mode is specified.\n
Valid options are 0 (Auto), 10, or 100."
$IBMFE_5 = "Force the operating mode to Full Duplex.\n
SPEED must be specified and valid for this keyword.\n
Valid options are 0 (Auto), 1 (HALF), 2 (DUPLEX)."
$IBMFE_6 = "Force the driver to use I/O mapped mode.\n
The default mode is memory-mapped.\n
Valid options are 0 (DEFAULT) or 1."
$IBMFE_7 = "The driver defaults to 802.2 frame format. You
may use this default to select from the other 3
options => 802.3, Ethernet II and Ethernet SNAP."
$IBMFE_8 = "IBMFE 802.3"
$IBMFE_9 = "IBMFE 802.2"
$IBMFE_10 = "IBMFE SNAP"
$IBMFE_11 = "IBMFE E_II"
;DrIvEr DeScRiPtIoN EnD
