Version: 1.00
SyntaxVersion: 1.00
Driver IBMEINWS
{
Description: $DESC
Help: $HELP
Path: \NETWARE
File: IBMEINWS.LAN
Prompt NODE
{
}
Prompt NUM_ADAPTERS REQ
{
Description: $NADS
Help: $NAHP
Type: STRING
Values: $ONE, $MORE
Default: $ONE
}
Prompt SERIAL
If (NUM_ADAPTERS == $MORE) REQUIRED
Else OPTIONAL
{
Description: $SNDS
Help: $SNHP
Type: HEX(8)
Values: 00000001 - FFFFFFFF
Default: UNDEFINED
OutputFormat: 'SERIAL=%s'
}
Frame FrameSelect
{
CDescription: $8023
Choice: 'Ethernet_802.3'
CDescription: $8022
Choice: 'Ethernet_802.2'
CDescription: $SNAP
Choice: 'Ethernet_SNAP'
CDescription: $II
Choice: 'Ethernet_II'
Default: 1,2
}
}
DLANG: 4
;English
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
$DESC = "IBM EtherJet ISA Adapter"
$HELP = "This driver (IBMEINWS.LAN) supports the IBM EtherJet ISA
Adapter installed in 16-bit expansion slots in ISA servers.
You can install up to four adapters as long as their settings
do not conflict. If more than one adapter is installed then
the Plug & Play serial number must be given for each. Single
adapter configurations do not require the serial number."
$NADS = "Number of adapters"
$NAHP = "If more than one adapter is being installed, please indicate
this and you will be asked to specify the Plug & Play serial
number for each adapter."
$ONE = "One"
$MORE = "More than one"
$SNDS = "Serial number"
$SNHP = "If more than one adapter is being installed, the Plug & Play
serial number for this adapter is required."
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
LANG: 6
;French (Français)
$DESC = "IBM EtherJet ISA Adapter"
$HELP = "This driver (IBMEINWS.LAN) supports the IBM EtherJet ISA
Adapter installed in 16-bit expansion slots in ISA servers.
You can install up to four adapters as long as their settings
do not conflict. If more than one adapter is installed then
the Plug & Play serial numbers must be given for each. Single
adapter configurations do not require the serial number."
$NADS = "Number of adapters"
$NAHP = "If more than one adapter is being installed, please indicate
this and you will be asked to specify the Plug & Play serial
number for each adapter."
$ONE = "One"
$MORE = "More than one"
$SNDS = "Serial number"
$SNHP = "If more than one adapter is being installed, the Plug & Play
serial number for this adapter is required."
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
LANG: 7
;German (Deutsch)
$DESC = "IBM EtherJet ISA-Adapter"
$HELP = "Dieser Treiber (IBMEINWS.LAN) unterstützt IBM EtherJet
ISA-Adapter, die in den 16-Bit-Erweiterungssteckplätzen
in ISA-Servern installiert sind. Es können bis zu vier
Adaptern installiert werden, solange deren Einstellungen
nicht im Widerspruch zueinander stehen. Wenn mehr als ein
Adapter installiert wurde, muß die Plug-and-Play-Seriennummer
für jeden Adapter angegeben werden. Bei Konfigurationen mit
nur einem Adapter muß die Seriennummer nicht angegeben
werden."
$NADS = "Anzahl an Adaptern"
$NAHP = "Wenn mehr als ein Adapter installiert wurde, muß dies
angegeben werden. Außerdem muß die Plug-and-Play-Seriennummer
für jeden Adapter angegeben werden."
$ONE = "Einer"
$MORE = "Mehr als einer"
$SNDS = "Seriennummer"
$SNHP = "Wenn mehr als ein Adapter installiert wurde, muß die
Plug-and-Play-Seriennummer für jeden Adapter angegeben
werden."
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
LANG: 8
;Italian (Italiano)
$DESC = "IBM EtherJet ISA Adapter"
$HELP = "This driver (IBMEINWS.LAN) supports the IBM EtherJet ISA
Adapter installed in 16-bit expansion slots in ISA servers.
You can install up to four adapters as long as their settings
do not conflict. If more than one adapter is installed then
the Plug & Play serial numbers must be given for each. Single
adapter configurations do not require the serial number."
$NADS = "Number of adapters"
$NAHP = "If more than one adapter is being installed, please indicate
this and you will be asked to specify the Plug & Play serial
number for each adapter."
$ONE = "One"
$MORE = "More than one"
$SNDS = "Serial number"
$SNHP = "If more than one adapter is being installed, the Plug & Play
serial number for this adapter is required."
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
LANG: 14
;Spanish (Español)
$DESC = "Adaptador IBM EtherJet ISA"
$HELP = "Este controlador (IBMEINWS.LAN) da soporte al Adaptador IBM
EtherJet ISA instalado en ranuras de expansión de 16 bits en
servidores ISA. Pueden instalarse hasta cuatro adaptadores
siempre y cuando sus valores no entren en conflicto. Si se
instala más de un adaptador, debe especificarse el número de
serie Conectar y Listo de cada uno de ellos. Para las
configuraciones que tienen un solo adaptador no es preciso
especificar el número de serie."
$NADS = "Número de adaptadores"
$NAHP = "Si se va a instalar más de un adaptador, deberá indicarlo así
y se le solicitará que especifique el número de serie Conectar
y Listo para cada adaptador."
$ONE = "Uno"
$MORE = "Más de uno"
$SNDS = "Número de serie"
$SNHP = "Si se va a instalar más de un adaptador, es necesario indicar
el número de serie Conectar y Listo para cada adaptador."
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
LANG: 9
;Japanese
$DESC = "IBM EtherJet ISA âAâ_âvâ^ü["
$HELP = "é▒é╠âhâëâCâoü[ (IBMEINWS.LAN) é═ ISA âTü[âoü[é╠ 16 ârâbâg
ègÆúâXâìâbâgé╔âCâôâXâgü[âïé│éΩé─éóéΘ IBM EtherJet ISA
âAâ_âvâ^ü[é≡âTâ|ü[âgé╡é▄é╖üBÉ▌ÆΦé╔òsôsìçé¬É╢é╢é╚éóî└éΦ
âAâ_âvâ^ü[é≡ 4 é┬é▄é┼âCâôâXâgü[âïé┼é½é▄é╖üB2 ê╚Åπé╠âAâ_âvâ^ü[
é¬âCâôâXâgü[âïé│éΩé─éóéΘé╞üAâvâëâOüEâAâôâhüEâvâîâCüEâVâèâAâïö╘ìåé¬
ù^éªéτéΩé▄é╖üB 1 âAâ_âvâ^ü[ì\ɼé┼é═âVâèâAâïüEâiâôâôâoü[é═
òsùvé┼é╖üB"
$NADS = "âAâ_âvâ^ü[ö╘ìå"
$NAHP = "2 ê╚Åπé╠âAâ_âvâ^ü[é¬âCâôâXâgü[âïé│éΩé─éóéΘÅΩìçüAé╗éΩé≡ÄwÆΦ
é╡é─é¡é╛é│éóüBèeâAâ_âvâ^ü[é╔æ╬é╡é─âvâëâOüEâAâôâhüEâvâîâCüEâVâèâAâïö╘ìåé╠
ÄwÆΦé¬ùvïüé│éΩé▄é╖üB"
$ONE = "1"
$MORE = "2 ê╚Åπ"
$SNDS = "âVâèâAâïö╘ìå"
$SNHP = "2 ê╚Åπé╠âAâ_âvâ^ü[é¬âCâôâXâgü[âïé│éΩé─éóéΘÅΩìçüAé▒é╠âAâ_âvâ^ü[
é╠âvâëâOüEâAâôâhüEâvâîâCüEâVâèâAâïö╘ìåé¬òKùvé┼é╖üB"
$8023 = "Ethernet 802.3"
$8022 = "Ethernet 802.2"
$SNAP = "Ethernet SNAP"
$II = "Ethernet II"
