Metropoli BBS - dlkpci.ldi

VIEWER: dlkpci.ldi MODE: TEXT (ASCII)
;
;	Novell NetWare Server Driver Description File for DLKPCI.LAN
;

VER: 2.02
SYN: 1.00

DR DLKPCI
{
	DES:	$DLKPCI_1
	HELP:	$DLKPCI_2
	PAR:	2.00
	PROD:	'PCI.1011.0002.0000.0000.2?',
		'PCI.1011.0014.0000.0000.??',
		'PCI.1011.0009.0000.0000.11',
		'PCI.1011.0009.0000.0000.12',
		'PCI.1011.0009.0000.0000.2?',
		'PCI.1011.0009.1186.1100.11',
		'PCI.1011.0009.1186.1100.12',
		'PCI.1011.0009.1186.1100.2?'

	FILE:	DLKPCI.LAN
	TIME:	15

	PROMPT SLOT
	{
		DES:	$DLKPCI_3
		HELP:	$DLKPCI_4

		TYPE:	DECIMAL
		VAL:	1-65535
		DEF:	UNDEFINED
		OUT:	'SLOT=%s'
	}

	FRAME FrameSelect
	{
		CD:	$DLKPCI_5
		CH:	$DLKPCI_6
		CD:	$DLKPCI_7
		CH:	$DLKPCI_8
		CD:	$DLKPCI_9
		CH:	$DLKPCI_10
		CD:	$DLKPCI_11
		CH:	$DLKPCI_12
		DEF:	1,2,3,4
	}

	LIST Attachment OPTIONAL
	{
		HELP:	$DLKPCI_13

		CD:	$DLKPCI_14
		CH:	$DLKPCI_15
		CD:	$DLKPCI_16
		CH:	$DLKPCI_17
		CD:	$DLKPCI_18
		CH:	$DLKPCI_19
		CD:	$DLKPCI_20
		CH:	$DLKPCI_21
		CD:	$DLKPCI_22
		CH:	$DLKPCI_23
		CD:	$DLKPCI_24
		CH:	$DLKPCI_25
		CD:	$DLKPCI_26
		CH:	$DLKPCI_27
		OUT:	'%s'
	}

	PROMPT NODE OPTIONAL
	{
		DES:	$DLKPCI_28
		TYPE:	HEX
		VAL:	1-FFFFFFFFFFFE
		DEF:	UNDEFINED
		OUT:	'NODE=%s'
	}
}




DLANG:	4
;English
	$DLKPCI_1 = "D-Link PCI Ethernet Adapter driver"
	$DLKPCI_2 = "This driver supports PCI bus devices"
	$DLKPCI_3 = "Slot"
	$DLKPCI_4 = "Select the slot number that corresponds to the physical
			expansion slot where the board or other device is installed."
	$DLKPCI_5 = "802.3"
	$DLKPCI_6 = "ethernet_802.3"
	$DLKPCI_7 = "802.2"
	$DLKPCI_8 = "ethernet_802.2"
	$DLKPCI_9 = "SNAP"
	$DLKPCI_10 = "ethernet_snap"
	$DLKPCI_11 = "ethernet II"
	$DLKPCI_12 = "ethernet_II"
	$DLKPCI_13 = "Choose the connection/media type you would
			like to use, or NONE for preprogramed card's
			default. Please note that since this driver supports
			multiple PCI ethernet controllers some of the options
			given are non applicable to some controllers, i.e. 100MBPS
			is not applicable to DC21040 10MBPS devices."
	$DLKPCI_14 = "Twisted Pair 10MBPS"
	$DLKPCI_15 = "TP"
	$DLKPCI_16 = "Twisted pair - Full Duplex 10MBPS"
	$DLKPCI_17 = "TP_FULL_DUPLEX"
	$DLKPCI_18 = "Twisted pair - Full Duplex 100MBPS"
	$DLKPCI_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
	$DLKPCI_20 = "AUI - Thick Wire"
	$DLKPCI_21 = "AUI"
	$DLKPCI_22 = "BNC - Thin Wire"
	$DLKPCI_23 = "BNC"
	$DLKPCI_24 = "Fast Ethernet 100MBPS"
	$DLKPCI_25 = "LINE_SPEED=100"
	$DLKPCI_26 = "T4 Fast Ethernet 100MBPS"
	$DLKPCI_27 = "T4"
	$DLKPCI_28 = "Node Address"

LANG:	6
;French
	$DLKPCI_1 = "D-Link PCI Ethernet Adapter driver"
	$DLKPCI_2 = "This driver supports PCI bus devices"
	$DLKPCI_3 = "Slot"
	$DLKPCI_4 = "Select the slot number that corresponds to the physical
			expansion slot where the board or other device is installed."
	$DLKPCI_5 = "802.3"
	$DLKPCI_6 = "ethernet_802.3"
	$DLKPCI_7 = "802.2"
	$DLKPCI_8 = "ethernet_802.2"
	$DLKPCI_9 = "SNAP"
	$DLKPCI_10 = "ethernet_snap"
	$DLKPCI_11 = "ethernet II"
	$DLKPCI_12 = "ethernet_II"
	$DLKPCI_13 = "Choose the connection/media type you would
			like to use, or NONE for preprogramed card's
			default. Please note that since this driver supports
			multiple PCI ethernet controllers some of the options
			given are non applicable to some controllers, i.e. 100MBPS
			is not applicable to DC21040 10MBPS devices."
	$DLKPCI_14 = "Twisted Pair 10MBPS"
	$DLKPCI_15 = "TP"
	$DLKPCI_16 = "Twisted pair - Full Duplex 10MBPS"
	$DLKPCI_17 = "TP_FULL_DUPLEX"
	$DLKPCI_18 = "Twisted pair - Full Duplex 100MBPS"
	$DLKPCI_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
	$DLKPCI_20 = "AUI - Thick Wire"
	$DLKPCI_21 = "AUI"
	$DLKPCI_22 = "BNC - Thin Wire"
	$DLKPCI_23 = "BNC"
	$DLKPCI_24 = "Fast Ethernet 100MBPS"
	$DLKPCI_25 = "LINE_SPEED=100"
	$DLKPCI_26 = "T4 Fast Ethernet 100MBPS"
	$DLKPCI_27 = "T4"
	$DLKPCI_28 = "Node Address"

LANG:	7
;German
	$DLKPCI_1 = "D-Link PCI Ethernet Adapter driver"
	$DLKPCI_2 = "This driver supports PCI bus devices"
	$DLKPCI_3 = "Slot"
	$DLKPCI_4 = "Select the slot number that corresponds to the physical
			expansion slot where the board or other device is installed."
	$DLKPCI_5 = "802.3"
	$DLKPCI_6 = "ethernet_802.3"
	$DLKPCI_7 = "802.2"
	$DLKPCI_8 = "ethernet_802.2"
	$DLKPCI_9 = "SNAP"
	$DLKPCI_10 = "ethernet_snap"
	$DLKPCI_11 = "ethernet II"
	$DLKPCI_12 = "ethernet_II"
	$DLKPCI_13 = "Choose the connection/media type you would
			like to use, or NONE for preprogramed card's
			default. Please note that since this driver supports
			multiple PCI ethernet controllers some of the options
			given are non applicable to some controllers, i.e. 100MBPS
			is not applicable to DC21040 10MBPS devices."
	$DLKPCI_14 = "Twisted Pair 10MBPS"
	$DLKPCI_15 = "TP"
	$DLKPCI_16 = "Twisted pair - Full Duplex 10MBPS"
	$DLKPCI_17 = "TP_FULL_DUPLEX"
	$DLKPCI_18 = "Twisted pair - Full Duplex 100MBPS"
	$DLKPCI_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
	$DLKPCI_20 = "AUI - Thick Wire"
	$DLKPCI_21 = "AUI"
	$DLKPCI_22 = "BNC - Thin Wire"
	$DLKPCI_23 = "BNC"
	$DLKPCI_24 = "Fast Ethernet 100MBPS"
	$DLKPCI_25 = "LINE_SPEED=100"
	$DLKPCI_26 = "T4 Fast Ethernet 100MBPS"
	$DLKPCI_27 = "T4"
	$DLKPCI_28 = "Node Address"

LANG:	8
;Italian
	$DLKPCI_1 = "D-Link PCI Ethernet Adapter driver"
	$DLKPCI_2 = "This driver supports PCI bus devices"
	$DLKPCI_3 = "Slot"
	$DLKPCI_4 = "Select the slot number that corresponds to the physical
			expansion slot where the board or other device is installed."
	$DLKPCI_5 = "802.3"
	$DLKPCI_6 = "ethernet_802.3"
	$DLKPCI_7 = "802.2"
	$DLKPCI_8 = "ethernet_802.2"
	$DLKPCI_9 = "SNAP"
	$DLKPCI_10 = "ethernet_snap"
	$DLKPCI_11 = "ethernet II"
	$DLKPCI_12 = "ethernet_II"
	$DLKPCI_13 = "Choose the connection/media type you would
			like to use, or NONE for preprogramed card's
			default. Please note that since this driver supports
			multiple PCI ethernet controllers some of the options
			given are non applicable to some controllers, i.e. 100MBPS
			is not applicable to DC21040 10MBPS devices."
	$DLKPCI_14 = "Twisted Pair 10MBPS"
	$DLKPCI_15 = "TP"
	$DLKPCI_16 = "Twisted pair - Full Duplex 10MBPS"
	$DLKPCI_17 = "TP_FULL_DUPLEX"
	$DLKPCI_18 = "Twisted pair - Full Duplex 100MBPS"
	$DLKPCI_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
	$DLKPCI_20 = "AUI - Thick Wire"
	$DLKPCI_21 = "AUI"
	$DLKPCI_22 = "BNC - Thin Wire"
	$DLKPCI_23 = "BNC"
	$DLKPCI_24 = "Fast Ethernet 100MBPS"
	$DLKPCI_25 = "LINE_SPEED=100"
	$DLKPCI_26 = "T4 Fast Ethernet 100MBPS"
	$DLKPCI_27 = "T4"
	$DLKPCI_28 = "Node Address"

LANG:	14
;Spanish
	$DLKPCI_1 = "D-Link PCI Ethernet Adapter driver"
	$DLKPCI_2 = "This driver supports PCI bus devices"
	$DLKPCI_3 = "Slot"
	$DLKPCI_4 = "Select the slot number that corresponds to the physical
			expansion slot where the board or other device is installed."
	$DLKPCI_5 = "802.3"
	$DLKPCI_6 = "ethernet_802.3"
	$DLKPCI_7 = "802.2"
	$DLKPCI_8 = "ethernet_802.2"
	$DLKPCI_9 = "SNAP"
	$DLKPCI_10 = "ethernet_snap"
	$DLKPCI_11 = "ethernet II"
	$DLKPCI_12 = "ethernet_II"
	$DLKPCI_13 = "Choose the connection/media type you would
			like to use, or NONE for preprogramed card's
			default. Please note that since this driver supports
			multiple PCI ethernet controllers some of the options
			given are non applicable to some controllers, i.e. 100MBPS
			is not applicable to DC21040 10MBPS devices."
	$DLKPCI_14 = "Twisted Pair 10MBPS"
	$DLKPCI_15 = "TP"
	$DLKPCI_16 = "Twisted pair - Full Duplex 10MBPS"
	$DLKPCI_17 = "TP_FULL_DUPLEX"
	$DLKPCI_18 = "Twisted pair - Full Duplex 100MBPS"
	$DLKPCI_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
	$DLKPCI_20 = "AUI - Thick Wire"
	$DLKPCI_21 = "AUI"
	$DLKPCI_22 = "BNC - Thin Wire"
	$DLKPCI_23 = "BNC"
	$DLKPCI_24 = "Fast Ethernet 100MBPS"
	$DLKPCI_25 = "LINE_SPEED=100"
	$DLKPCI_26 = "T4 Fast Ethernet 100MBPS"
	$DLKPCI_27 = "T4"
	$DLKPCI_28 = "Node Address"
[ RETURN TO DIRECTORY ]