AdapterID 0FDDFh
AdapterName "Enhanced 80386 Memory Expansion Adapter"
Numbytes 4
FixedResources
POS[0]=000000x0b
POS[1]=00000000b
POS[2]=00000000b
POS[3]=00xxxxxxb Exec
NamedItem Prompt "Matched Memory Cycles"
Choice "Enabled" pos[0]=XXXXXX1Xb
Choice "Disabled" pos[0]=XXXXXX0Xb
Help
"This memory card can disable Matched Memory Cycles for
use on machines which do not have Matched Memory Cycles
compatible with the original 16MHz Model-80."
NamedItem Prompt "Enabled Memory"
Choice "Run Set Configuration" pos[3]=xx111111b
Choice "0KB (0MB)" pos[3]=xx000000b
Choice "1024KB (1.0MB)" pos[3]=xx000001b
Choice "2048KB (2.0MB)" pos[3]=xx000010b
Choice "3072KB (3.0MB)" pos[3]=xx000011b
Choice "4096KB (4.0MB)" pos[3]=xx000100b
Choice "5120KB (5.0MB)" pos[3]=xx000101b
Choice "6144KB (6.0MB)" pos[3]=xx000110b
Choice "7168KB (7.0MB)" pos[3]=xx000111b
Choice "8192KB (8.0MB)" pos[3]=xx001000b
Choice "9216KB (9.0MB)" pos[3]=xx001001b
Choice "10240KB (10.0MB)" pos[3]=xx001010b
Choice "11264KB (11.0MB)" pos[3]=xx001011b
Choice "12288KB (12.0MB)" pos[3]=xx001100b
Choice "13312KB (13.0MB)" pos[3]=xx001101b
Choice "14336KB (14.0MB)" pos[3]=xx001110b
Choice "15360KB (15.0MB)" pos[3]=xx001111b
Choice "16384KB (16.0MB)" pos[3]=xx010000b
Help
"This item is used to allow the amount of enabled memory
on the memory card to be displayed when the configuration
is viewed. Modifying this field does not affect the amount
of enabled memory on the memory card.
This entry shows the amount of memory that can be enabled
on the adapter. Since the total system memory cannot exceed
16 megs, some of this memory may not be enabled.
If 'Run Set Configuration' appears in the display,
Set Configuration must be run again to re-display
the amount of enabled memory."
