VER: 1.03
SYN: 1.00
Driver NORMAL
{
PROD: 'PCI.108D.0001.0000.0000.0?',
'PNPISA.OLC.943.0',
'MCA.0A84',
'MCA.0A85',
'MCA.0A86',
'MCA.0142',
'EISA.OLC.901.?',
'EISA.OLC.902.?',
'PCMCIA.0121.2032',
'PCMCIA.0121.2132',
'PCMCIA.0121.3032',
'PCMCIA.0121.3232'
DES: $OCTOK162_DES
HELP: $OCTOK162_DRVHLP
PAR: 2.00
FILE: OCTOK162.LAN
OF: TOKENTSM.NLM,MSM.NLM,NBI.NLM
TIME: 90
PR SLOT
{
Values: 1-65535
HELP: $OCTOK162_SLOTHLP
}
FR FRMTYPE
{
HELP: $OCTOK162_FRMHLP
CD: $OCTOK162_1
CH: 'Token-Ring'
CD: $OCTOK162_2
CH: 'Token-Ring_SNAP'
DEF: 1
OCT: MSB
}
PR DUPLEX
{
DES: $OCDTR_DUPLEXDES
HELP: $OCDTR_DUPLEXHLP
TYPE: STRING
VALUES: 'AUTO', 'FULL', 'HALF'
DEFAULT: 'AUTO'
OUTPUTFORMAT: 'DUPLEX=%s'
}
PR NODE
{
HELP: $OCTOK162_NODEHLP
}
PR SHOWINFO
{
DES: $OCTOK162_INFODES
HELP: $OCTOK162_INFOHLP
TYPE: HEX (1)
VALUES: 0-1
DEFAULT: 0
OUTPUTFORMAT: 'SHOWINFO=%s'
}
}
DLANG: 4
;English
$OCTOK162_1 = "TOKEN-RING"
$OCTOK162_2 = "TOKEN-RING_SNAP"
$OCTOK162_DES = "Olicom Token-Ring 16/4 Adapters"
$OCTOK162_DRVHLP = "The server driver (OCTOK162.LAN) supports all 16 bit Olicom
Token-Ring 16/4 Adapters and the Olicom Token-Ring PCI
Adapter."
$OCTOK162_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver reentrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequences of such a change."
$OCTOK162_SLOTHLP = "Select the number for the (E)ISA, MCA or PCI expansion slot
in which the Token-Ring network adapter is installed."
$OCTOK162_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCDTR_DUPLEXDES = "Token-Ring Duplex Mode"
$OCDTR_DUPLEXHLP = "Select Token-Ring Duplex Mode used by driver.\n
If AUTO is used the driver will use full or half duplex
depending on the network.\n
When FULL is used only full duplex operation is allowed.\n
When HALF is used only half duplex is allowed (classic token-ring).\n
The default is AUTO."
$OCTOK162_INFODES = "Info message control"
$OCTOK162_INFOHLP = "The value 1 enables some alerts messages of
a more informative character (Single Station, Duplex Mode)
that are suppressed by default."
LANG: 6
;French
$OCTOK162_1 = "TOKEN-RING"
$OCTOK162_2 = "TOKEN-RING_SNAP"
$OCTOK162_DES = "Olicom Token-Ring 16/4 Adapters"
$OCTOK162_DRVHLP = "The server driver (OCTOK162.LAN) supports all 16 bit Olicom
Token-Ring 16/4 Adapters and the Olicom Token-Ring PCI
Adapter."
$OCTOK162_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver reentrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequences of such a change."
$OCTOK162_SLOTHLP = "Select the number for the (E)ISA, MCA or PCI expansion slot
in which the Token-Ring network adapter is installed."
$OCTOK162_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCDTR_DUPLEXDES = "Token-Ring Duplex Mode"
$OCDTR_DUPLEXHLP = "Select Token-Ring Duplex Mode used by driver.\n
If AUTO is used the driver will use full or half duplex
depending on the network.\n
When FULL is used only full duplex operation is allowed.\n
When HALF is used only half duplex is allowed (classic token-ring).\n
The default is AUTO."
$OCTOK162_INFODES = "Info message control"
$OCTOK162_INFOHLP = "The value 1 enables some alerts messages of
a more informative character (Single Station, Duplex Mode)
that are suppressed by default."
LANG: 7
;German
$OCTOK162_1 = "TOKEN-RING"
$OCTOK162_2 = "TOKEN-RING_SNAP"
$OCTOK162_DES = "Olicom Token-Ring 16/4 Adapters"
$OCTOK162_DRVHLP = "The server driver (OCTOK162.LAN) supports all 16 bit Olicom
Token-Ring 16/4 Adapters and the Olicom Token-Ring PCI
Adapter."
$OCTOK162_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver reentrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequences of such a change."
$OCTOK162_SLOTHLP = "Select the number for the (E)ISA, MCA or PCI expansion slot
in which the Token-Ring network adapter is installed."
$OCTOK162_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCDTR_DUPLEXDES = "Token-Ring Duplex Mode"
$OCDTR_DUPLEXHLP = "Select Token-Ring Duplex Mode used by driver.\n
If AUTO is used the driver will use full or half duplex
depending on the network.\n
When FULL is used only full duplex operation is allowed.\n
When HALF is used only half duplex is allowed (classic token-ring).\n
The default is AUTO."
$OCTOK162_INFODES = "Info message control"
$OCTOK162_INFOHLP = "The value 1 enables some alerts messages of
a more informative character (Single Station, Duplex Mode)
that are suppressed by default."
LANG: 8
;Italian
$OCTOK162_1 = "TOKEN-RING"
$OCTOK162_2 = "TOKEN-RING_SNAP"
$OCTOK162_DES = "Olicom Token-Ring 16/4 Adapters"
$OCTOK162_DRVHLP = "The server driver (OCTOK162.LAN) supports all 16 bit Olicom
Token-Ring 16/4 Adapters and the Olicom Token-Ring PCI
Adapter."
$OCTOK162_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver reentrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequences of such a change."
$OCTOK162_SLOTHLP = "Select the number for the (E)ISA, MCA or PCI expansion slot
in which the Token-Ring network adapter is installed."
$OCTOK162_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCDTR_DUPLEXDES = "Token-Ring Duplex Mode"
$OCDTR_DUPLEXHLP = "Select Token-Ring Duplex Mode used by driver.\n
If AUTO is used the driver will use full or half duplex
depending on the network.\n
When FULL is used only full duplex operation is allowed.\n
When HALF is used only half duplex is allowed (classic token-ring).\n
The default is AUTO."
$OCTOK162_INFODES = "Info message control"
$OCTOK162_INFOHLP = "The value 1 enables some alerts messages of
a more informative character (Single Station, Duplex Mode)
that are suppressed by default."
LANG: 14
;Spanish
$OCTOK162_1 = "TOKEN-RING"
$OCTOK162_2 = "TOKEN-RING_SNAP"
$OCTOK162_DES = "Olicom Token-Ring 16/4 Adapters"
$OCTOK162_DRVHLP = "The server driver (OCTOK162.LAN) supports all 16 bit Olicom
Token-Ring 16/4 Adapters and the Olicom Token-Ring PCI
Adapter."
$OCTOK162_FRMHLP = "The driver defaults to the Token-Ring (802.2) frame type.
Depending on the frame type your protocol requires, you can
either change to Token-Ring_SNAP (SNAP on top of 802.2) or
choose both frame types by loading the driver reentrantly.
Do not change the MSB/LSB parameter unless you are familiar
with the consequences of such a change."
$OCTOK162_SLOTHLP = "Select the number for the (E)ISA, MCA or PCI expansion slot
in which the Token-Ring network adapter is installed."
$OCTOK162_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it MUST adhere to the
following rules: If MSB order (the default) is used, the
node address shall consist of 12 hexadecimal digits, the
leftmost being 4,5,6 or 7, as in 4000ABCD1234.\n
If LSB order is used, the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCDTR_DUPLEXDES = "Token-Ring Duplex Mode"
$OCDTR_DUPLEXHLP = "Select Token-Ring Duplex Mode used by driver.\n
If AUTO is used the driver will use full or half duplex
depending on the network.\n
When FULL is used only full duplex operation is allowed.\n
When HALF is used only half duplex is allowed (classic token-ring).\n
The default is AUTO."
$OCTOK162_INFODES = "Info message control"
$OCTOK162_INFOHLP = "The value 1 enables some alerts messages of
a more informative character (Single Station, Duplex Mode)
that are suppressed by default."
