;
; File name: EX10.LDI
; File Version: 1.00
;
; For .LAN version 1.00
;
SyntaxVersion: 1.00
; file: EX10.LDI
; Intel EtherExpress(TM) 10 ISA LAN Adapter
; Help file for NetWare Server driver
Driver EX10
{
Description: $EX10_1
Help: $EX10_2
File: EX10.LAN
Par: 1.00
PROMPT PORT
if (BUS != MCA) REQUIRED
else HIDDEN
{
Help: $EX10_3
Values: 200,210,220,230,240,250,260,280,290,2A0,2B0,2C0,2D0,
2E0,2F0,300,310,320,330,340,350,360,370,380,390
Default: 300
ReservedLength: 16
}
PROMPT SLOT
if (BUS == MCA) REQUIRED
else HIDDEN
{
Values: 1-8
}
FRAME FrameSelect
{
Help: $EX10_4
CDescription: $EX10_5
Choice: 'Ethernet_802.3'
CDescription: $EX10_6
Choice: 'Ethernet_802.2'
CDescription: $EX10_7
Choice: 'Ethernet_SNAP'
CDescription: $EX10_8
Choice: 'Ethernet_II'
Default: 1,2
}
}
Driver EX10PnP
{
Description: $EX10_PNP_1
Help: $EX10_2
File: EX10.LAN
PROD: 'PNPISA.INCLUDE.INT.110.*'
Par: 2.00
PROMPT SLOT
if (BUS == PNPISA) REQUIRED
else HIDDEN
{
Help: $EX10_PNP_3
}
FRAME FrameSelect
{
Help: $EX10_4
CDescription: $EX10_5
Choice: 'Ethernet_802.3'
CDescription: $EX10_6
Choice: 'Ethernet_802.2'
CDescription: $EX10_7
Choice: 'Ethernet_SNAP'
CDescription: $EX10_8
Choice: 'Ethernet_II'
Default: 1,2
}
}
DLANG: 4
;English
$EX10_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter"
$EX10_PNP_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter with PnP enabled"
$EX10_2 = "Use this driver with an Intel EtherExpress(TM) 10 ISA
LAN Adapter in an ISA (AT bus), or EISA file server.\n\n"
$EX10_3 = "Select the port value (I/O address) that
matches the I/O address setting of the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
To view or change the I/O address of the
adapter, run EXPRSET. Make sure the I/O
address used by the Intel EtherExpress(TM)
10 ISA LAN Adapter is not used by any other
device in the system."
$EX10_PNP_3 = "This is the slot value that indicates the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
This value should be filled in by the Novell
installation utility when it scans for Plug
and Play adapters."
$EX10_4 = "Select the frame types required by your
network. The driver supports the 802.2,
802.3, Ethernet SNAP, and Ethernet II frame
types. The default frame types are 802.2 and 802.3."
$EX10_5 = "802.3"
$EX10_6 = "802.2"
$EX10_7 = "802.2 SNAP"
$EX10_8 = "Ethernet II"
LANG: 6
;French
$EX10_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter"
$EX10_PNP_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter with PnP enabled"
$EX10_2 = "Use this driver with an Intel EtherExpress(TM) 10 ISA
LAN Adapter in an ISA (AT bus), or EISA file server.\n\n"
$EX10_3 = "Select the port value (I/O address) that
matches the I/O address setting of the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
To view or change the I/O address of the
adapter, run EXPRSET. Make sure the I/O
address used by the Intel EtherExpress(TM)
10 ISA LAN Adapter is not used by any other
device in the system."
$EX10_PNP_3 = "This is the slot value that indicates the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
This value should be filled in by the Novell
installation utility when it scans for Plug
and Play adapters."
$EX10_4 = "Select the frame types required by your
network. The driver supports the 802.2,
802.3, Ethernet SNAP, and Ethernet II frame
types. The default frame types are 802.2 and 802.3."
$EX10_5 = "802.3"
$EX10_6 = "802.2"
$EX10_7 = "802.2 SNAP"
$EX10_8 = "Ethernet II"
LANG: 7
;German
$EX10_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter"
$EX10_PNP_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter with PnP enabled"
$EX10_2 = "Use this driver with an Intel EtherExpress(TM) 10 ISA
LAN Adapter in an ISA (AT bus), or EISA file server.\n\n"
$EX10_3 = "Select the port value (I/O address) that
matches the I/O address setting of the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
To view or change the I/O address of the
adapter, run EXPRSET. Make sure the I/O
address used by the Intel EtherExpress(TM)
10 ISA LAN Adapter is not used by any other
device in the system."
$EX10_PNP_3 = "This is the slot value that indicates the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
This value should be filled in by the Novell
installation utility when it scans for Plug
and Play adapters."
$EX10_4 = "Select the frame types required by your
network. The driver supports the 802.2,
802.3, Ethernet SNAP, and Ethernet II frame
types. The default frame types are 802.2 and 802.3."
$EX10_5 = "802.3"
$EX10_6 = "802.2"
$EX10_7 = "802.2 SNAP"
$EX10_8 = "Ethernet II"
LANG: 8
;Italian
$EX10_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter"
$EX10_PNP_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter with PnP enabled"
$EX10_2 = "Use this driver with an Intel EtherExpress(TM) 10 ISA
LAN Adapter in an ISA (AT bus), or EISA file server.\n\n"
$EX10_3 = "Select the port value (I/O address) that
matches the I/O address setting of the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
To view or change the I/O address of the
adapter, run EXPRSET. Make sure the I/O
address used by the Intel EtherExpress(TM)
10 ISA LAN Adapter is not used by any other
device in the system."
$EX10_PNP_3 = "This is the slot value that indicates the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
This value should be filled in by the Novell
installation utility when it scans for Plug
and Play adapters."
$EX10_4 = "Select the frame types required by your
network. The driver supports the 802.2,
802.3, Ethernet SNAP, and Ethernet II frame
types. The default frame types are 802.2 and 802.3."
$EX10_5 = "802.3"
$EX10_6 = "802.2"
$EX10_7 = "802.2 SNAP"
$EX10_8 = "Ethernet II"
LANG: 14
;Spanish
$EX10_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter"
$EX10_PNP_1 = "Intel EtherExpress(TM) 10 ISA LAN Adapter with PnP enabled"
$EX10_2 = "Use this driver with an Intel EtherExpress(TM) 10 ISA
LAN Adapter in an ISA (AT bus), or EISA file server.\n\n"
$EX10_3 = "Select the port value (I/O address) that
matches the I/O address setting of the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
To view or change the I/O address of the
adapter, run EXPRSET. Make sure the I/O
address used by the Intel EtherExpress(TM)
10 ISA LAN Adapter is not used by any other
device in the system."
$EX10_PNP_3 = "This is the slot value that indicates the
Intel EtherExpress(TM) 10 ISA LAN Adapter.
This value should be filled in by the Novell
installation utility when it scans for Plug
and Play adapters."
$EX10_4 = "Select the frame types required by your
network. The driver supports the 802.2,
802.3, Ethernet SNAP, and Ethernet II frame
types. The default frame types are 802.2 and 802.3."
$EX10_5 = "802.3"
$EX10_6 = "802.2"
$EX10_7 = "802.2 SNAP"
$EX10_8 = "Ethernet II"
