VER: 1.00
SYN: 1.00
; Olicom 217x Ethernet server driver information file.
Driver OC217X
{
PROD: 'PNPISA.INCLUDE.OLC.94A.5'
DES: $OCE2XODI_DES0
HELP: $OCE2XODI_DRVHLP0
PAR: 2.00
FILE: OCE2XODI.LAN
OF: ETHERTSM.NLM,MSM.NLM,NBI.NLM
PR SLOT OPTIONAL
{
HELP: $OCE2XODI_SLOTHLP
}
FR FRMTYPE
{
HELP: $OCE2XODI_FRMHLP
CD: $OCE2XODI_1
CH: 'Ethernet_802.3'
CD: $OCE2XODI_2
CH: 'Ethernet_802.2'
CD: $OCE2XODI_3
CH: 'Ethernet_SNAP'
CD: $OCE2XODI_4
CH: 'Ethernet_II'
DEF: 1, 2
}
PR NODE
{
HELP: $OCE2XODI_NODEHLP
}
}
; Olicom GoCard Ethernet server driver information file.
Driver OCGOCARD
{
PROD: 'PCMCIA.0121.0101'
PROD: 'PCMCIA.0121.3122'
PROD: 'PCMCIA.0121.3222'
DES: $OCE2XODI_DES1
HELP: $OCE2XODI_DRVHLP1
PAR: 2.00
FILE: OCE2XODI.LAN
OF: ETHERTSM.NLM,MSM.NLM,NBI.NLM
PR SLOT OPTIONAL
{
HELP: $OCE2XODI_SLOTHLP
}
FR FRMTYPE
{
HELP: $OCE2XODI_FRMHLP
CD: $OCE2XODI_1
CH: 'Ethernet_802.3'
CD: $OCE2XODI_2
CH: 'Ethernet_802.2'
CD: $OCE2XODI_3
CH: 'Ethernet_SNAP'
CD: $OCE2XODI_4
CH: 'Ethernet_II'
DEF: 1, 2
}
PR NODE
{
HELP: $OCE2XODI_NODEHLP
}
}
DLANG: 4
;English
$OCE2XODI_1 = "802.3"
$OCE2XODI_2 = "802.2"
$OCE2XODI_3 = "802.2 SNAP"
$OCE2XODI_4 = "Ethernet II"
$OCE2XODI_DES0 = "Olicom Ethernet ISA/IV Adapter driver"
$OCE2XODI_DRVHLP0 = "This driver supports the Olicom Ethernet ISA/IV
Adapters in systems with an ISA or EISA bus."
$OCE2XODI_DES1 = "Olicom Ethernet GoCard Adapter driver"
$OCE2XODI_DRVHLP1 = "This driver supports the Olicom Ethernet GoCard
Adapters in systems with an PCCard Slot."
$OCE2XODI_FRMHLP = "The default frame types are 802.2 and 802.3. It is strongly
recommended that at least 802.2 be enabled.\n
If an existing network uses the 802.3 media header, enable
this frame type also."
$OCE2XODI_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it shall be specfied using
11 or 12 hexdigits, and the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCE2XODI_SLOTHLP = "Select the slot value that corresponds to
the network board.\n\n"
LANG: 6
;French
$OCE2XODI_1 = "802.3"
$OCE2XODI_2 = "802.2"
$OCE2XODI_3 = "802.2 SNAP"
$OCE2XODI_4 = "Ethernet II"
$OCE2XODI_DES0 = "Olicom Ethernet ISA/IV Adapter driver"
$OCE2XODI_DRVHLP0 = "This driver supports the Olicom Ethernet ISA/IV
Adapters in systems with an ISA or EISA bus."
$OCE2XODI_DES1 = "Olicom Ethernet GoCard Adapter driver"
$OCE2XODI_DRVHLP1 = "This driver supports the Olicom Ethernet GoCard
Adapters in systems with an PCCard Slot."
$OCE2XODI_FRMHLP = "The default frame types are 802.2 and 802.3. It is strongly
recommended that at least 802.2 be enabled.\n
If an existing network uses the 802.3 media header, enable
this frame type also."
$OCE2XODI_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it shall be specfied using
11 or 12 hexdigits, and the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCE2XODI_SLOTHLP = "Select the slot value that corresponds to
the network board.\n\n"
LANG: 7
;German
$OCE2XODI_1 = "802.3"
$OCE2XODI_2 = "802.2"
$OCE2XODI_3 = "802.2 SNAP"
$OCE2XODI_4 = "Ethernet II"
$OCE2XODI_DES0 = "Olicom Ethernet ISA/IV Adapter driver"
$OCE2XODI_DRVHLP0 = "This driver supports the Olicom Ethernet ISA/IV
Adapters in systems with an ISA or EISA bus."
$OCE2XODI_DES1 = "Olicom Ethernet GoCard Adapter driver"
$OCE2XODI_DRVHLP1 = "This driver supports the Olicom Ethernet GoCard
Adapters in systems with an PCCard Slot."
$OCE2XODI_FRMHLP = "The default frame types are 802.2 and 802.3. It is strongly
recommended that at least 802.2 be enabled.\n
If an existing network uses the 802.3 media header, enable
this frame type also."
$OCE2XODI_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it shall be specfied using
11 or 12 hexdigits, and the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCE2XODI_SLOTHLP = "Select the slot value that corresponds to
the network board.\n\n"
LANG: 8
;Italian
$OCE2XODI_1 = "802.3"
$OCE2XODI_2 = "802.2"
$OCE2XODI_3 = "802.2 SNAP"
$OCE2XODI_4 = "Ethernet II"
$OCE2XODI_DES0 = "Olicom Ethernet ISA/IV Adapter driver"
$OCE2XODI_DRVHLP0 = "This driver supports the Olicom Ethernet ISA/IV
Adapters in systems with an ISA or EISA bus."
$OCE2XODI_DES1 = "Olicom Ethernet GoCard Adapter driver"
$OCE2XODI_DRVHLP1 = "This driver supports the Olicom Ethernet GoCard
Adapters in systems with an PCCard Slot."
$OCE2XODI_FRMHLP = "The default frame types are 802.2 and 802.3. It is strongly
recommended that at least 802.2 be enabled.\n
If an existing network uses the 802.3 media header, enable
this frame type also."
$OCE2XODI_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it shall be specfied using
11 or 12 hexdigits, and the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCE2XODI_SLOTHLP = "Select the slot value that corresponds to
the network board.\n\n"
LANG: 14
;Spanish
$OCE2XODI_1 = "802.3"
$OCE2XODI_2 = "802.2"
$OCE2XODI_3 = "802.2 SNAP"
$OCE2XODI_4 = "Ethernet II"
$OCE2XODI_DES0 = "Olicom Ethernet ISA/IV Adapter driver"
$OCE2XODI_DRVHLP0 = "This driver supports the Olicom Ethernet ISA/IV
Adapters in systems with an ISA or EISA bus."
$OCE2XODI_DES1 = "Olicom Ethernet GoCard Adapter driver"
$OCE2XODI_DRVHLP1 = "This driver supports the Olicom Ethernet GoCard
Adapters in systems with an PCCard Slot."
$OCE2XODI_FRMHLP = "The default frame types are 802.2 and 802.3. It is strongly
recommended that at least 802.2 be enabled.\n
If an existing network uses the 802.3 media header, enable
this frame type also."
$OCE2XODI_NODEHLP = "Do not change the network adapter's node address unless you
are prepared to administer local node addresses. If not
specified, the network board will use the globally assigned
burned in address.\n
If a node address is specified, it shall be specfied using
11 or 12 hexdigits, and the 11th digit from the right shall
be 2,6,A or E, as in 020987654321."
$OCE2XODI_SLOTHLP = "Select the slot value that corresponds to
the network board.\n\n"
