BOARD
        ID="SMC0110"
        NAME="Standard Microsystems Corp. Elite32 Ethernet"
        MFR="Standard Microsystems Corp."
        CATEGORY="NET"
        SLOT=EISA
        LENGTH=341
        AMPERAGE=0
        SKIRT=NO
        READID=YES
        BUSMASTER=100
        IOCHECK=INVALID
        DISABLE=SUPPORTED

IOPORT(1)=0zc80h     			;NODE ID PORT
IOPORT(2)=0z831H                        ;IRQ

FUNCTION="Dual Channel Ethernet Adapter"
        TYPE="NET"

        SUBFUNCTION="I/O Port Addresses"
                HELP="The I/O Port Address is unique to the chosen slot.
                      There is no need for an alternate choice."
                CHOICE="Slot Specific Addressing"
                  FREE
                        PORT = 0zC80h-0zC83h
                        SIZE = BYTE
                        PORT = 0z800h-0z802h
                        SIZE = BYTE
                        PORT = 0z830h-0z831h
                        SIZE = WORD
                        PORT = 0z840h-0z841h
                        SIZE = WORD
                        PORT = 0z810h-0z81Fh
                        SIZE = WORD
                        PORT = 0z820h-0z82Fh
                        SIZE = WORD

        SUBFUNCTION="Interrupt Level"
                HELP="The Interrupt Level is chosen automatically. 
                      By using Edit Change Resource from the menus,
                      the choice may be changed.  Although interrupt
                      sharing is supported, it is recommended that
                      you choose an Interrupt Level that is not being
                      used."
                CHOICE="Automatically Determined"
                  LINK
                        IRQ=3|4|5|7|9|10|11|12
                        SHARE=YES
                        TRIGGER=EDGE
                        INIT=IOPORT(2)  LOC(3-1) 000 | 001 | 010
                                          | 011 | 100 | 101 
                                          | 110 | 111


        SUBFUNCTION="Port A Configuration"
                HELP="Port A must be configured to use the twisted pair/
		      coax or AUI port."
                CHOICE="Twisted Pair / Coax"
		  FREE
			INIT=IOPORT(2)	LOC(4) 1
		CHOICE="AUI"
		  FREE
			INIT=IOPORT(2)	LOC(4) 0