Metropoli BBS - blmm3.ddi

VIEWER: blmm3.ddi MODE: TEXT (ASCII)
SyntaxVersion: 1.00

  ; File: BLMM3.HAM

Driver BLMM3
{
    PAR: 2.00
    Description:    $BUSLOGIC_1
    Help:           $BUSLOGIC_2
    File:   BLMM3.HAM
    PROD: 'PCI.INCLUDE.104B.1040.*.*.*'

    LI PciShowPortsOption OPT
    {
        DES: $BL_PCISHOWSLOTDESCSTRG
        HELP:$BL_PCISHOWSLOTHELPSTRG
        
        CD:     $BL_NOSTRG
        CH:     ''

        CD:     $BL_YESSTRG
        CH:     'ShowSlots'

        OUT:  '%s'
        DEF:    1
    }

    LI TagQueuing

    {
        DES: $BL_TQDESCSTRG
        HELP:$BL_TQHELPSTRG
        
        CD:     $BL_NOSTRG
        CH:     ''

        CD:     $BL_YESSTRG
        CH:     'Enable_TQ'

        OUT:  '%s'
        DEF:    1
    }

}


Driver BLMM3_LEGACY
{
    PAR: 1.00
    Description:    $BUSLOGIC_1_LEGACY
    Help:           $BUSLOGIC_2_LEGACY
    File:   BLMM3.HAM
    PROD:   'EISA.BUS.420.*'


    PROMPT PORT REQ
    {
       Values:          330, 334, 234, 230, 134, 130
       DEF:             330
       ReservedLength:  4
    }



    LI TagQueuing

    {
        DES: $BL_TQDESCSTRG
        HELP:$BL_TQHELPSTRG
        
        CD:     $BL_NOSTRG
        CH:     ''

        CD:     $BL_YESSTRG
        CH:     'Enable_TQ'

        OUT:  '%s'
        DEF:    1
    }

}


DLANG:  4
;English
    $BUSLOGIC_1 = 
"BusLogic MultiMaster PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_1_LEGACY = 
"BusLogic MultiMaster non-PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_2 = 
"By default, this driver will register PCI cards in the order 
in which it finds them. To override the default load order, you 
may specify a slot value on the command line by using the SLOT 
or SHOWSLOTS command line switch . "
    $BUSLOGIC_2_LEGACY = 
"For all non-PCI MultiMaster host adapters (ISA,EISA,MCA,VESA),
you will be prompted to manually enter a port value if you 
do not specify the PORT command line switch." 

    $BL_NOSTRG = "No"
    $BL_YESSTRG = "Yes"

    $BL_TQDESCSTRG = "Enable Tagged Queuing Support"
    $BL_TQHELPSTRG = 
"Tagged queuing is an advanced SCSI-II feature that allows overlapped
commands to a SCSI device which enhances performance. Since some devices
do not support Tagged Queuing, the BusLogic driver defaults to tagged
queuing disabled. To enable tagged queuing on this BusLogic host adapter
only, choose Yes. (this only affects those SCSI devices that support
tagged queuing and are connected to this host adapter)."


    $BL_PCISHOWSLOTDESCSTRG = "Override default PCI adapter load order"
    $BL_PCISHOWSLOTHELPSTRG = 
"If you have multiple BusLogicMultiMaster PCI host adapters in the system 
and you wish to OVERRIDE the default load ordering for these cards,
choose 'YES' for this option. After saving the parameters and continuing 
the installation, you will you see a flashing screen \n
       \"Loading driver BLMM3.HAM -PLEASE WAIT\" \n
At this point ,press ALT + ESC keys to switch to the system console to manually 
select the desired PCI host adapter."


LANG:   6
;French

;default English
    $BUSLOGIC_1 = 
"BusLogic MultiMaster PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_1_LEGACY = 
"BusLogic MultiMaster non-PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_2 = 
"By default, this driver will register PCI cards in the order 
in which it finds them. To override the default load order, you 
may specify a slot value on the command line by using the SLOT 
or SHOWSLOTS command line switch . "
    $BUSLOGIC_2_LEGACY = 
"For all non-PCI MultiMaster host adapters (ISA,EISA,MCA,VESA),
you will be prompted to manually enter a port value if you 
do not specify the PORT command line switch." 

    $BL_NOSTRG = "No"
    $BL_YESSTRG = "Yes"

    $BL_TQDESCSTRG = "Enable Tagged Queuing Support"
    $BL_TQHELPSTRG = 
"Tagged queuing is an advanced SCSI-II feature that allows overlapped
commands to a SCSI device which enhances performance. Since some devices
do not support Tagged Queuing, the BusLogic driver defaults to tagged
queuing disabled. To enable tagged queuing on this BusLogic host adapter
only, choose Yes. (this only affects those SCSI devices that support
tagged queuing and are connected to this host adapter)."


    $BL_PCISHOWSLOTDESCSTRG = "Override default PCI adapter load order"
    $BL_PCISHOWSLOTHELPSTRG = 
"If you have multiple BusLogicMultiMaster PCI host adapters in the system 
and you wish to OVERRIDE the default load ordering for these cards,
choose 'YES' for this option. After saving the parameters and continuing 
the installation, you will you see a flashing screen \n
       \"Loading driver BLMM3.HAM -PLEASE WAIT\" \n
At this point ,press ALT + ESC keys to switch to the system console to manually 
select the desired PCI host adapter."




LANG:   7
;German

;default English
    $BUSLOGIC_1 = 
"BusLogic MultiMaster PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_1_LEGACY = 
"BusLogic MultiMaster non-PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_2 = 
"By default, this driver will register PCI cards in the order 
in which it finds them. To override the default load order, you 
may specify a slot value on the command line by using the SLOT 
or SHOWSLOTS command line switch . "
    $BUSLOGIC_2_LEGACY = 
"For all non-PCI MultiMaster host adapters (ISA,EISA,MCA,VESA),
you will be prompted to manually enter a port value if you 
do not specify the PORT command line switch." 

    $BL_NOSTRG = "No"
    $BL_YESSTRG = "Yes"

    $BL_TQDESCSTRG = "Enable Tagged Queuing Support"
    $BL_TQHELPSTRG = 
"Tagged queuing is an advanced SCSI-II feature that allows overlapped
commands to a SCSI device which enhances performance. Since some devices
do not support Tagged Queuing, the BusLogic driver defaults to tagged
queuing disabled. To enable tagged queuing on this BusLogic host adapter
only, choose Yes. (this only affects those SCSI devices that support
tagged queuing and are connected to this host adapter)."


    $BL_PCISHOWSLOTDESCSTRG = "Override default PCI adapter load order"
    $BL_PCISHOWSLOTHELPSTRG = 
"If you have multiple BusLogicMultiMaster PCI host adapters in the system 
and you wish to OVERRIDE the default load ordering for these cards,
choose 'YES' for this option. After saving the parameters and continuing 
the installation, you will you see a flashing screen \n
       \"Loading driver BLMM3.HAM -PLEASE WAIT\" \n
At this point ,press ALT + ESC keys to switch to the system console to manually 
select the desired PCI host adapter."



LANG:   8
;Italian

;default English

    $BUSLOGIC_1 = 
"BusLogic MultiMaster PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_1_LEGACY = 
"BusLogic MultiMaster non-PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_2 = 
"By default, this driver will register PCI cards in the order 
in which it finds them. To override the default load order, you 
may specify a slot value on the command line by using the SLOT 
or SHOWSLOTS command line switch . "
    $BUSLOGIC_2_LEGACY = 
"For all non-PCI MultiMaster host adapters (ISA,EISA,MCA,VESA),
you will be prompted to manually enter a port value if you 
do not specify the PORT command line switch." 

    $BL_NOSTRG = "No"
    $BL_YESSTRG = "Yes"

    $BL_TQDESCSTRG = "Enable Tagged Queuing Support"
    $BL_TQHELPSTRG = 
"Tagged queuing is an advanced SCSI-II feature that allows overlapped
commands to a SCSI device which enhances performance. Since some devices
do not support Tagged Queuing, the BusLogic driver defaults to tagged
queuing disabled. To enable tagged queuing on this BusLogic host adapter
only, choose Yes. (this only affects those SCSI devices that support
tagged queuing and are connected to this host adapter)."


    $BL_PCISHOWSLOTDESCSTRG = "Override default PCI adapter load order"
    $BL_PCISHOWSLOTHELPSTRG = 
"If you have multiple BusLogicMultiMaster PCI host adapters in the system 
and you wish to OVERRIDE the default load ordering for these cards,
choose 'YES' for this option. After saving the parameters and continuing 
the installation, you will you see a flashing screen \n
       \"Loading driver BLMM3.HAM -PLEASE WAIT\" \n
At this point ,press ALT + ESC keys to switch to the system console to manually 
select the desired PCI host adapter."



LANG:   14
;Spanish

;default English
    $BUSLOGIC_1 = 
"BusLogic MultiMaster PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_1_LEGACY = 
"BusLogic MultiMaster non-PCI SCSI Adapter HAM Driver"
    $BUSLOGIC_2 = 
"By default, this driver will register PCI cards in the order 
in which it finds them. To override the default load order, you 
may specify a slot value on the command line by using the SLOT 
or SHOWSLOTS command line switch . "
    $BUSLOGIC_2_LEGACY = 
"For all non-PCI MultiMaster host adapters (ISA,EISA,MCA,VESA),
you will be prompted to manually enter a port value if you 
do not specify the PORT command line switch." 

    $BL_NOSTRG = "No"
    $BL_YESSTRG = "Yes"

    $BL_TQDESCSTRG = "Enable Tagged Queuing Support"
    $BL_TQHELPSTRG = 
"Tagged queuing is an advanced SCSI-II feature that allows overlapped
commands to a SCSI device which enhances performance. Since some devices
do not support Tagged Queuing, the BusLogic driver defaults to tagged
queuing disabled. To enable tagged queuing on this BusLogic host adapter
only, choose Yes. (this only affects those SCSI devices that support
tagged queuing and are connected to this host adapter)."

    $BL_PCISHOWSLOTDESCSTRG = "Override default PCI adapter load order"
    $BL_PCISHOWSLOTHELPSTRG = 
"If you have multiple BusLogicMultiMaster PCI host adapters in the system 
and you wish to OVERRIDE the default load ordering for these cards,
choose 'YES' for this option. After saving the parameters and continuing 
the installation, you will you see a flashing screen \n
       \"Loading driver BLMM3.HAM -PLEASE WAIT\" \n
At this point ,press ALT + ESC keys to switch to the system console to manually 
select the desired PCI host adapter."
[ RETURN TO DIRECTORY ]