NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  Server Configuration Information
README FOR:  CONFG7.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare 3.11
NetWare 3.12
NetWare 4.01
NetWare SFT III 3.11
NetWare 4.02
NetWare 4.1
NetWare SFT III 4.1
NetWare 4.11
SMP 4.11

ABSTRACT:

Information Collected by the CONFIG.NLM program: Displays Volume size in
Megabytes, Loader version on Nw v4.x, serial number, ABEND.LOG on NW v4.11,
part of IO$LOG.ERR and MSSTATUS.DMP, TIMESYNC.CFG and ATPS.CFG, and whether
COMPRESSION, SUBALLOCATION, and MIGRATION are enabled on each volume.
CONFIG.NLM and CONFGNUT.NLM work on all versions of NetWare.

 These files are not supported by NOVELL, INC. They are untested.
 Use them at your own risk.


 -----------------------------------------------------------------
 DISCLAIMER
 THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
 -----------------------------------------------------------------


ISSUE: 

How can a servers current configuration including Modules list, NCF files, INET
config file, Speed Rating, Total RAM, Set Parameters, Disk information, Volume
information, Name Space information, Lan information, whether DOS is removed
and SYSTEM files be gathered quickly and easily.

 By using CONFIG.NLM or CONFGNUT.NLM.

Self-Extracting File Name: confg7.exe

Files Included     Size     Date      Time

..\
      CONFG7.TXT     (This file)
      CONFG7.TXT            4193         3-24-97      1:51:24 pm
    CONFGNUT.NLM           50874         3-17-97      3:26:38 pm
      CONFIG.NLM           43998         3-17-97      3:48:50 pm


Installation Instructions:

Copy CONFIG.NLM and CONFGNUT.NLM to the SYS:SYSTEM directory of the server. At
the console prompt type LOAD CONFIG or LOAD CONFGNUT and press return.
CONFIG.NLM and CONFGNUT.NLM create a text file (CONFIG.TXT) in the SYS:SYSTEM
directory. If CONFIG.TXT exists CONFIG.NLM will overwrite the file. CONFGNUT
and CONFIG can append or overwrite CONFIG.TXT. CONFIG.NLM no longer creates its
own SCREEN, so watch the SERVER CONSOLE SCREEN for CONFIG IS DONE or any other
messages that CONFIG.NLM will post. By default CONFIG will not include the
SYSTEM files or the SET parameters. LOAD CONFIG /d to include the SYSTEM file
listings. LOAD CONFIG /s to include the SET parameters and LOAD CONFIG /a to
append to CONFIG.TXT. LOAD CONFIG /ads to get set parameters, file listing, and
append to CONFIG.TXT. CONFIG.TXT has a list of all the MODULES that were loaded
on the server when  CONFIG.NLM was run. It also has the contents of all NCF
files on the default  local drive and in the SYS:SYSTEM directory. It includes
CONFIG.SYS and  AUTOEXEC.BAT files for the server. A directory of SYS:SYSTEM
and your local  drive is also placed in CONFIG.TXT if /d is put on the command
line.  The SET parameters can be obtained by putting /s on the command line. On
NW SFT III servers, load CONFIG or CONFGNUT in both IOENGINES and in the
MSENGINE. When loading CONFIG on SFT III it is loaded 3 times. On the 2nd and
3rd times you load CONFIG be sure to use the /a to append to CONFIG.TXT.
CONFGNUT is a GUI version and should be self explanatory. There are many more
options available in CONFGNUT.



 -----------------------------------------------------------------
 Any trademarks referenced in this document are the property of their
respective owners.  Consult your product manuals for complete trademark
information.
 -----------------------------------------------------------------