NDIS...................General installation notes
NDIS INSTALLATION NOTES:
FOR THE INTEL EtherExpress(tm) 16 FAMILY OF NETWORK ADAPTERS
============================================================
This document applies to the EtherExpress(tm) 16, 16/TP, 16C, FLASHC,
MCA, and MCA/TP. It contains installation notes for installing the
driver. It does not explain how to configure an EtherExpress board.
For instructions about configuring the board, see either the Expert's
Guide or the Complete Guide for your board.
This document is also available on FaxBACK. Document #6309.
INTRODUCTION:
-------------
Many different network operating systems use a standard NDIS driver
to talk to the network adapter. The NDIS subdirectory on the
EtherExpress disk contains the files you need to use the EtherExpress
card with one of these operating systems.
FILE Purpose
---- --------------------------------------------
EXP16.DOS NDIS driver for DOS workstations.
EXP16.OS2 NDIS driver for servers & OS/2 workstations.
PROTOCOL.INI Fragment of the general PROTOCOL.INI file.
This fragment contains information specific
to the EtherExpress 16 boards. You'll need
to add this fragment to the general
PROTOCOL.INI file.
EXPSTAT.EXE A utility to help determine the status of the
driver. (In the root directory)
Your NOS may also make use of a Network information (.NIF) file. If
so, you can find the .NIF file for DOS workstations in the
\MSLANMAN.DOS\DRIVERS\NIF directory, and the .NIF file for OS/2
workstations in the \MSLANMAN.OS2\DRIVERS\NIF directory.
There are some specific documents on FaxBACK that may help.
----------------------------------------------------------------
EtherExpress 16: Retix Configuration Information........... 6452
EtherExpress 16: DEC Pathworks Configuration Information... 6454
EtherExpress 16: FTP PC/TCP Configuration Information...... 6321
