4 IBM LAN Support for AS/400 and NetWare
v1.02
Installing and configuring the Intel EtherExpress(TM) PRO/10 PCI
LAN adapter using IBM LAN Support for AS/400 and NetWare*
================================================================
Location of Driver: \NDIS\E10P.DOS (for LANSUP)
Location of Driver: \DOS\E10PODI.COM (for ODINSUP)
Sample configuration files are included below.
----------------------------------------------
General instructions
--------------------
There are two methods to connect the EtherExpress PRO/10 PCI LAN
adapter simultaneously to an IBM AS/400 (or other Host based on DLC
protocol) and NetWare server:
1 Using LANSUP (NDIS based), or
2 Using ODINSUP (ODI based).
LANSUP.COM and ODINSUP.COM are Novell drivers and are included in
the VLMUPx.EXE (where x is the number of the latest offering) file
available on WWW (http://netwire.novell.com/).
Sample CONFIG.SYS file for LANSUP
---------------------------------
DEVICE = \LANMAN\PROTMAN.DOS (version 1.1 or later )
DEVICE = \LANMAN\E10P.DOS
DEVICE = \LANMAN\DXMA0MOD.SYS (version 1.35 or later)
DEVICE = \LANMAN\DXME0MOD.SYS (version 1.35 or later)
DEVICE = C:\PCS\EIMPCS.SYS
DEVICE = C:\PCS\ECYDDX.SYS
Sample AUTOEXEC.NCF file for LANSUP
-----------------------------------
CD\LANMAN
NETBIND (version 1.1 or later )
LSL (version 2.11 or later)
LANSUP (version 1.27 or later)
IPXODI (version 2.20 or later)
NETX or VLM (version 3.32 of NETX.EXE or later
version 1.20 of VLM.EXE or later)
F:
LOGIN
C:\PCS\STARTPCS
*NOTE - It's normal for LANSUP to report:
"Board 1, Frame TOKEN-RING, LSB Mode" when loading.
Sample PROTOCOL.INI file for LANSUP
-----------------------------------
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[ETHERNET]
DRIVERNAME = DXME0$
BINDINGS = E10P
[E10P]
DRIVERNAME = E10P$
Sample NET.CFG file for LANSUP
------------------------------
Link Driver LANSUP
Max Frame Size = 1490
NetWare DOS Requester
First Network Drive = F
The second set of example files (following) are using the ODINSUP
(ODI based) driver.
Sample CONFIG.SYS file for ODINSUP
----------------------------------
DEVICE = \LANMAN\PROTMAN.DOS /I:C:\LAMAN (version 1.1 or later)
DEVICE = \LANMAN\DXMA0MOD.SYS (version 1.35 or later)
DEVICE = \LANMAN\DXME0MOD.SYS (version 1.35 or later)
DEVICE = C:\PCS\EIMPCS.SYS
DEVICE = C:\PCS\ECYDDX.SYS
Sample AUTOEXEC.BAT file for ODINSUP
------------------------------------
CD\LANMAN
LSL (version 2.11 or later)
E10PODI (version 1.13 or later)
ODINSUP (version 2.00 or later)
NETBIND (version 1.1 or later)
IPXODI (version 2.20 or later)
NETX or VLM (version 3.32 or later of NETX.EXE;
version 1.20 or later of VLM.EXE)
F:
LOGIN
C:\PCS\STARTPCS
Sample PROTOCOL.INI file for ODINSUP
------------------------------------
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[ETHERNET]
DRIVERNAME = DXME0$
BINDINGS = E10PODI
[E10PODI]
DRIVERNAME = E10PODI$
Sample NET.CFG (C:\LANMAN\NET.CFG) file for ODINSUP
---------------------------------------------------
Link Driver E10PODI
Frame ethernet_802.2
Frame ethernet_II
Frame ethernet_802.3
Frame ethernet_snap
Protocol ODINSUP
Bind E10PODI
NetWare DOS Requester
First Network Drive = F
* Third-party trademarks are the property of their respective
owners
