Changes to Version 1.5 LAN Support Software (94-01-12)
---------------------------------------------------------------
- Version 1.04 of the NetWare DOS ODI Driver (ETH16I.COM)
Ensured that the driver does not do "self-receive" although some
protocol might send such a directed packet.
- Version 1.04 of the NetWare OS/2 ODI Driver (ETH16I.SYS)
Ensured that the driver does not do "self-receive" although some
protocol might send such a directed packet.
- Version 1.03 of the NetWare 2.x IPX Server Driver (?ETH16I.OBJ)
Ensured that the driver does not do "self-receive" although some
protocol might send such a directed packet.
- Version 1.04 of the NetWare 3.x/4.x ODI Server Driver (ETH16I.LAN),
iplemented according to the specification 3.1 (= 3.0 Rev F).
- Version 1.02 of the NDIS3 -Enhanced Mode Windows Driver (ETH16I.386),
together with the OEM Setup file (OEMSETUP.INF).
- An OEM Setup File (OEMSEUP.INF) and a Help File (ETH16I.HLP) for
the NetWare NT Client Setup.
- A modified OEM Setup File (OEMSETNT.INF) and a Help File (ETH16I.HLP)
for the Windows NT Setup.
- Version 1.03 of Diagnostics program ETH16I.EXE.
- Version 11.1 of the FTP Packet Driver (ETH16I.COM).
Changes to Version 1.4 LAN Support Software (93-10-22)
---------------------------------------------------------------
-Version 2.02 of the NDIS Drivers (ETH16I.DOS & ETH16I.OS2).
Corrects a problem encountered with OSLAN (and WFW 3.11, but
potential error source also for other environments).
A new PROTOCOL.INI keyword added to ETH16I.OS2 ("processor=286")
to be used if the driver is to work with 286PC.
Ensured that the driver does not do "self-receive" although some
protocol might send such a directed packet.
-Version 1.03 of the NetWare 3.x/4.x ODI Server Driver (ETH16I.LAN).
The length of the transmit packet is no more evenized, correcting a
problem encountered with some NetWare commands (PURGE,...) when
frame type was 802.2.
-Version 1.03 of the NetWare OS/2 ODI Driver (ETH16I.SYS).
The length of the transmit packet is no more evenized.
-Version 1.01 of the Windows NT driver and the OEMSETUP.INF file.
-Version 1.0h of the SCO Unix Driver. New corrected version
-Version 1.06 of EtherTeam 16i Configuration program E16IC.EXE.
With this program you can reconstruct the card configuration even
if there is CRC error from EEPROM. You can greate CRC errors to
EtherTeam 16i if you configure it with Bios configuration program
and you have EtherTeam 16i card and Motherboard EtherTeam 16i in
the same PC in same I/O address.
-Version 1.02 of Diagnostics program ETH16I.EXE. Corrects the
possible error with BNC port handling.
-Version 10.02 of the FTP Packet Driver
Contents of Version 1.4 LAN Support Software (93-10-22)
--------------------------------------------------------------
- NDIS DOS ETH16I.DOS REV 2.02
Microsoft certified
- NDIS OS/2 ETH16I.OS2 REV 2.02
Microsoft certified
- NDIS 3 NT ETH16i.SYS REV 1.01
- DOS ODI ETH16I.COM REV 1.03
Novell certified
- OS/2 ODI ETH16I.SYS REV 1.03
Novell certified.
- 3.1x ODI ETH16I.LAN REV 1.03
Novell certified.
- 2.x IPX Server REV 1.02
Novell certified.
- Packet driver ETH16i.COM REV 10.02
- SCO UNIX LLI Driver REV 1.0.0h
- Network Monitor software
This directory is in packed format. You must first copy monitor.exe
to an empty diskette and run this program from the diskette, to greate
an installation disk which contines.
EtherTeam 16i NetBIOS Monitor ETHMON.EXE REV 1.0
EtherTeam 16i TetWare Monitor ETHMONW.EXE REV 1.0
- Configuration Program E16IC.EXE REV 1.06
New corrected version
- Diagnostics program DIAG.EXE REV 1.02
- OEMSETUP.INF file for installation to Windows for Workgroups
- eth16i.nif file in directory IBM for LAN Server installation
- eth16i.nif file in directory DOS for DOS LAN Requester Clien installation
- !ICLA030.CFG file for EISA configuration
- RSL-802.1E directory includes the version of BOOTDD.SYS which works with
EtherTeam 16i. The version delivered with the server Remote System Load
software can be too old.
_________________________________________________________________
Changes to Version 1.3 LAN Support Software (93-08-10)
- We have added the following drivers to this diskette:
NDIS3 NT, NDIS3 WIN, Packet driver.
- We have added following programs:
Diagnostic program.
Because there is not so much space on the diskette, we have
packet the monitor program. You must first copy monitor.exe
to an empty diskette and run this program from the diskette, to greate
an installation disk for Ethernet monitor program.
RPL_E16I.DOC text file tells you how to make Mircrosoft bootserver with
EtherTeam 16i boards.
- DOS ODI driver version 1.03: Corrects problem which encountered with
"nul" fragments in receive, found in using the MIGRATE utility in NetWare4.
- 3.1x ODI server driver 1.02: Corrects problem when handling "null" receives
done from ETHERTSM in NetWare 4.0 when both 802.2 and 802.3 frame types
were bound.
Contents of Version 1.3 LAN Support Software (93-08-10)
- NDIS DOS ETH16I.DOS REV 2.01
Microsoft certified
- NDIS OS/2 ETH16I.OS2 REV 2.01
Microsoft certified
- NDIS 3 NT ETH16i.SYS REV 1.00
Beta driver look at readme.txt in NDIS3 dricetory
- NDIS 3 WIN ETH16i.386 REV 1.00
Beta driver look at readme.txt in NDIS3 directory
- DOS ODI ETH16I.COM REV 1.03
Corrected a problem in handling "NULL" fragment receive, found
in using the MIGRATE Utility in NetWare 4.0.
- OS/2 ODI ETH16I.SYS REV 1.02
Novell certified.
- 3.1x ODI ETH16I.LAN REV 1.02
Corrected a problem in handling "NULL" receive done from ETHERTSM
in NetWare 4.0, when both 802.3 and 802.2 frame types were bound.
- 2.x IPX Server REV 1.02
Novell certified.
- Packet driver ETH16i.COM REV 10.01
- SCO UNIX LLI Driver REV 1.0.0g
- Network Monitor software
This directory is in packed format. You must first copy monitor.exe
to an empty diskette and run this program from the diskette, to greate
an installation disk which contines.
EtherTeam 16i NetBIOS Monitor ETHMON.EXE REV 1.0
EtherTeam 16i TetWare Monitor ETHMONW.EXE REV 1.0
- Configuration Program E16IC.EXE REV 1.05
New corrected version
- Diagnostic program DIAG.EXE REV 1.01
- OEMSETUP.INF file for installation to Windows for Workgroups
- eth16i.nif file in directory IBM for LAN Server installation
- eth16i.nif file in directory DOS for DOS LAN Requester Clien installation
- !ICLA030.CFG file for EISA configuration
- RSL-802.1E directory includes the version of BOOTDD.SYS which works with
EtherTeam 16i. The version delivered with the server Remote System Load
software can be too old.
_
________________________________________________________________________
Contents of Version 1.2 LAN Support Software (93-05-14) (FINAL 2)
- NDIS DOS ETH16I.DOS REV 2.01
Microsoft certified
Problem with ON/OFF state of driver corrected (PC-NFS, RLAT)
- NDIS OS/2 ETH16I.OS2 REV 2.01
Microsoft certified
Problem with ON/OFF state of driver corrected (PC-NFS, RLAT)
- DOS ODI ETH16I.COM REV 1.02
Novell certified.
Installation Information File ETH16I.INS included.
Problem with ODINSUP corrected.
- OS/2 ODI ETH16I.SYS REV 1.02
Novell certified.
Problem with ODINSUP corrected.
- 3.1x ODI ETH16I.LAN REV 1.01
Novell certified
Directory tree changed so that NetWare 4.0 installation is easy.
- 2.x IPX Server REV 1.02
Novell certified.
Potential problem with Receive Lookahead corrected
- SCO UNIX LLI Driver REV 1.0.0g
Fully tested driver
- Network Monitor software
EtherTeam 16i NetBIOS Monitor ETHMON.EXE REV 1.0
EtherTeam 16i TetWare Monitor ETHMONW.EXE REV 1.0
- Configuration Program E16IC.EXE REV 1.03
- OEMSETUP.INF file for installation to Windows for Workgroups
- eth16i.nif file in directory IBM for LAN Server installation
- eth16i.nif file in directory DOS for DOS LAN Requester Clien installation
- !ICLA030.CFG file for EISA configuration
- RSL-802.1E directory includes the version of BOOTDD.SYS which works with
EtherTeam 16i. The version delivered with the server Remote System Load
software can be too old.
__________________________________________________________________
Contents of Version 1.1 LAN Support Software (93-03-18) (FINAL 1)
- NDIS DOS ETH16I.DOS REV 2.01
Microsoft certified
- NDIS OS/2 ETH16I.OS2 REV 2.00
Microsoft certified
- DOS ODI ETH16I.COM REV 1.01
Novell certified.
Installation Information File ETH16I.INS included.
- OS/2 ODI ETH16I.SYS REV 1.01
Driver tested, now in Novell certification
- 3.1x ODI ETH16I.LAN REV 1.01
Novell certified
Installation Information File ETH16I.LDI included.
MSM.NLM, ETHERTSM.NLM and MONITOR.NLM included.
RPL.NLM and RBOOT.RPL included.
- 2.x IPX Server REV 1.01
Novell certified.
- SCO UNIX LLI Driver
This driver is not fully tested
- Network Monitor software
EtherTeam 16i NetBIOS Monitor ETHMON.EXE REV 1.0
EtherTeam 16i TetWare Monitor ETHMONW.EXE REV 1.0
- Configuration Program E16IC.EXE REV 1.03
- OEMSETUP.INF file for installation to Windows for Workgroups
- eth16i.nif file in directory IBM for LAN Server installation
- !ICLA030.CFG file for EISA configuration
_
-----------------------------------------------------------------------
Contents of Version 1.0 LAN Support Software (92-12-16) (FINAL 0)
- NDIS DOS ETH16I.DOS REV 1.01
Driver tested, not certified
- NDIS OS/2 ETH16I.OS2 REV 1.01
Driver tested, not certified
- DOS ODI ETH16I.COM REV 1.01
Workstation Driver tested, not certified
- Configuration Program E16IC.EXE REV 1.01
- Network Monitor software
EtherTeam 16i NetBIOS Monitor ETHMON.EXE REV 1.0
EtherTeam 16i TetWare Monitor ETHMONW.EXE REV 1.0
- OS/2 ODI ETH16I.SYS REV 1.00
Workstation Driver not thoroughly tested, not certified
- 3.1x ODI ETH16I.LAN REV 1.00
Server Driver not thoroughly tested, not certified
- 2.x IPX Server REV 1.00
Driver not thoroughly tested, not certified
- OEMSETUP.INF file for installation to Windows for Workgroups
- !ICLA030.CFG file for EISA configuration
-----------------------------------------------------------------------
Contents of Version 0.1 LAN Support Software (92-10-30)
- NDIS DOS Driver tested, not certified
- NDIS OS/2 Driver tested, not certified
- DOS ODI Workstation Driver tested, not certified
- Configuration Program, beta version
- Network Monitor software, beta version
_________________________________________________________________
