[ETH16I]
Type = NDIS
Title = "ICL EtherTeam 16i Adapter"
Version = 2.02
Drivername = ETH16I$

[FILE]
Name = ETH16I.DOS

; Parameter start

[IOaddress]
tag = IOAddress
display = "I/O base address"
type = Hexadecimal
set = 240, 260, 280, 2A0, 300, 340, 380
default = 2A0
optional = YES
editable = YES
help = "This parameter specifies the starting address of the
 input/output port for the network adapter card.  The defined value
 must be based on the configuration of the network adapter card.
 If the value of this parameter does not match the network adapter card
 setup configuration, the network adapter driver reports an error."

[Transceiver]
tag = TRANSCEIVER
display = "Transceiver"
type = string
Strlength = 4
Set = AUTO, TP, AUI, BNC
default = AUTO
optional = YES
editable = YES
help = "This parameter specifies the transceiver configuration of the
 network adapter card.  The specification of this parameter depends
 on the specific hardware configuration."