+----------------------------------------------------------+
        |             Auto Busmaster PCI Adapter                   |
        |          Device Driver for Windows NT (tm)               |
        |       Supplement to Installation Instructions            |
        +----------------------------------------------------------+


        Several implementations of the PCI bus standard use
        configuration defaults that are incompatible with other
        implementations.  This has been observed to cause some
        failures in PCI network adapters.

        In order to ensure correct operation of your Auto
        Busmaster PCI Adapter, you need to run a .BAT file
        included on this diskette at installation time before
        you begin using the adapter.  Here are the instructions
        for running this file:

        1.  In the Program Manager, click on the File menu option

        2.  On the File pulldown menu, click on Run

        3.  In the Command Line entry field, enter A:\NT\PCSETNT

        4.  Click on OK

        This .BAT file will install a device driver called PCISETUP.SYS
        which will load and execute each time the machine is rebooted,
        before the main  Auto Busmaster PCI Adapter device driver
        is loaded.


        ***

        Trademarks

        Microsoft, MS-DOS and Windows NT are trademarks of Microsoft
        Corporation in the U.S.A. and other countries.