[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    EISA
[LanguagesSupported]
    ENG
[Options]
    CresNT
[OptionsTextENG]
    CresNT   = "Cisco CDDI/FDDI EISA Adapter"
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
COMPRESSEDID_MASK = 4294967295
C320_EISA_ID  = 53629710
C320T_EISA_ID = 70406926
Manufacturer    = "Microsoft"
ProductMajorVersion     = "3"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ThisInfFileName = ""
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionC320NTExisted = $(FALSE)
OldVersionC320TNTExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "Cisco CDDI/FDDI EISA Adapter Setup"
ProductSoftwareC320NTDescription      = "Cisco CDDI/FDDI EISA Driver"
ProductHardwareC320NTDescription      = "Cisco CDDI/FDDI EISA Adapter"
ProductSoftwareC320NTName     = "c320nt"
ProductSoftwareC320NTTitle    = "Cisco CDDI/FDDI EISA Driver"
ProductSoftwareC320NTImagePath = "\SystemRoot\System32\drivers\c320nt.sys"
NetRuleSoftwareC320NTType     = "c320ntSys ndisDriver c320ntDriver"
NetRuleSoftwareC320NTUse      = $(SoftwareType)
NetRuleSoftwareC320NTBindForm = """c320ntSys"" yes no container"
NetRuleSoftwareC320NTClass    = {"c320ntDriver basic"}
NetRuleSoftwareC320NTBindable = {"c320ntDriver c320ntAdapter non exclusive 100"}
ProductHardwareC320NTName     = "C320NT"
ProductHardwareC320NTTitle    = "Cisco CDDI/FDDI EISA Adapter"
NetRuleHardwareC320NTType     = "c320nt c320ntAdapter"
NetRuleHardwareC320NTBindForm = " yes yes container"
NetRuleHardwareC320NTClass    = {"c320ntAdapter basic"}
ProductKeyC320NTName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareC320NTName)"\CurrentVersion"
ParamKeyC320NTName    = $(!NTN_ServiceBase)$(ProductHardwareC320NTName)"\Parameters"
; Turbo Adapter defines
ProductSoftwareC320TNTDescription      = "Cisco CDDI/FDDI EISA Driver"
ProductHardwareC320TNTDescription      = "Cisco CDDI/FDDI EISA Adapter"
ProductSoftwareC320TNTName     = "c320tnt"
ProductSoftwareC320TNTTitle    = "Cisco CDDI/FDDI EISA Driver"
ProductSoftwareC320TNTImagePath = "\SystemRoot\System32\drivers\c320tnt.sys"
NetRuleSoftwareC320TNTType     = "c320tntSys ndisDriver c320tntDriver"
NetRuleSoftwareC320TNTUse      = $(SoftwareType)
NetRuleSoftwareC320TNTBindForm = """c320tntSys"" yes no container"
NetRuleSoftwareC320TNTClass    = {"c320tntDriver basic"}
NetRuleSoftwareC320TNTBindable = {"c320tntDriver c320tntAdapter non exclusive 100"}
ProductHardwareC320TNTName     = "C320TNT"
ProductHardwareC320TNTTitle    = "Cisco CDDI/FDDI EISA Adapter"
NetRuleHardwareC320TNTType     = "c320tnt c320tntAdapter"
NetRuleHardwareC320TNTBindForm = " yes yes container"
NetRuleHardwareC320TNTClass    = {"c320tntAdapter basic"}
ProductKeyC320TNTName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareC320TNTName)"\CurrentVersion"
ParamKeyC320TNTName    = $(!NTN_ServiceBase)$(ProductHardwareC320TNTName)"\Parameters"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
; Get my INF Filename
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            CloseRegKey $(KeyProduct)
            Debug-Output " ShellCode error"
            goto ShellCodeError
        endif
        CloseRegKey $(KeyProduct)
        set ThisInfFileName = $($R0)
    else
        set ThisInfFileName = CRES
    endif
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set CommonStatus = STATUS_REBOOT
        Debug-Output $(ThisInfFileName)" Configure: Product Key Name is "$(ProductKeyName)" NTN_RegBase is "$(!NTN_RegBase)
        Ifstr(i) $(ProductKeyC320NTName) == $(!NTN_RegBase)
            Debug-Output $(ThisInfFileName)" Cannot configure the CresNT driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        else-Ifstr(i) $(ProductKeyC320TNTName) == $(!NTN_RegBase)
            Debug-Output $(ThisInfFileName)" Cannot configure the CresNT driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        else
            Debug-Output $(ThisInfFileName)" Cannot configure the CresNT adapter card."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
        endif
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(ThisInfFileName)" ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        goto nonfatalinfo
    else
        set StartLabel = installadapter
        set OEM_ABANDON_HW_OPTIONS = {}
        set OEM_ABANDON_SW_OPTIONS = {}
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    Debug-Output $(ThisInfFileName)" =================================================="
    Debug-Output $(ThisInfFileName)" STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output $(ThisInfFileName)" Selected Option is: "$(Option)
    Debug-Output $(ThisInfFileName)" =================================================="
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyC320NTName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        Debug-Output $(ThisInfFileName)" Opened Product Key for "$(ProductKeyC320NTName)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyC320NTName)
            Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareC320NTTitle),+
                $(ProductVersion)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            goto end
        endif
        set OldVersionC320NTExisted = $(TRUE)
    endif
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyC320TNTName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        Debug-Output $(ThisInfFileName)" Opened Product Key for "$(ProductKeyC320TNTName)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyC320TNTName)
            Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareC320TNTTitle),+
                $(ProductVersion)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            goto end
        endif
        set OldVersionC320TNTExisted = $(TRUE)
    endif
    goto nextstep
configureadapter = +
    set Error = "Configure: Sorry not yet implemented."
    goto fatal
nextstep = +
    StartWait
installproduct = +
    Debug-Output $(ThisInfFileName)" Installing product, Shelling to find Cisco EISA Adapters"
    Shell $(UtilityInf), EISAFindBus, $(C320_EISA_ID) $(COMPRESSEDID_MASK)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif
    set CardInfo = {}
    ifstr(i) $($R1) != {}
        set CardInfo = $($R1)
    endif
    Debug-Output $(ThisInfFileName)" Shelling to find Cisco EISA Adapters"
    Shell $(UtilityInf), EISAFindBus, $(C320T_EISA_ID) $(COMPRESSEDID_MASK)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif
    ifstr(i) $($R1) != {}
        ifstr(i) $(CardInfo) != {}
            ForListDo $($R1)
                set CardInfo = >($(CardInfo), $($))
            EndForListDo
        else
            set CardInfo = $($R1)
        endif
    endif
    ifstr(i) $(CardInfo) == {}
        Debug-Output $(ThisInfFileName)" Cannot find any card"
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = STATUS_USERCANCEL
        set from = "end"
        goto nonfatal
    endif
    Debug-Output $(ThisInfFileName)" Card Information: "$(CardInfo)
    set AdapterList = $(CardInfo)
    set C320Present = $(FALSE)
    set C320TPresent = $(FALSE)
    ForListDo $(AdapterList)
        set EISAId = *($($),3)
        ifint $(EISAId) == $(C320_EISA_ID)
            set C320NTPresent = $(TRUE)
            Debug-Output $(ThisInfFileName)" EISA Rev 3 Adapter present"
        endif
        ifint $(EISAId) == $(C320T_EISA_ID)
            set C320TNTPresent = $(TRUE)
            Debug-Output $(ThisInfFileName)" EISA Adapter present"
        endif
    EndForListDo
; INSTALLING SOFTWARE COMPONENTS
    ForListDo $(AdapterList)
        set EISAId = *($($),3)
        ifint $(EISAId) == $(C320_EISA_ID)
            set Option = C320NT
        else-Ifint $(EISAId) == $(C320T_EISA_ID)
            set Option = C320TNT
        else
            goto fatal
        endif
        ifint $($(Option)Present) == $(TRUE)
            ifint $(OldVersion$(Option)Existed) == $(FALSE)
                Ifstr(i) $(DoCopy) == "YES"
                   Debug-Output $(ThisInfFileName)" Verifying source directories for "$(Option)
                   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Goto ShellCodeError
                   Else-Ifstr(i) $($R0) == STATUS_FAILED
                       Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                       ifint $($ShellCode) != $(!SHELL_CODE_OK)
                          goto ShellCodeError
                       endif
                       set Error = $($R0)
                       Goto fatal
                   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                       Goto successful
                   Endif
                   Set SrcDir = $($R1)
                Endif
                Debug-Output $(ThisInfFileName)" Copying files for "$(Option)" driver, SrcDir: "$(SrcDir)
                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                       goto ShellCodeError
                    endif
                    set Error = $($R0)
                    goto fatal
                endif
                Debug-Output $(ThisInfFileName)" Adding S/W Component in Registry for "$(Option)
                Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftware$(Option)Name), +
                        $(ProductSoftware$(Option)Name), +
                        $(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftware$(Option)ImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)
                Set OEM_ABANDON_SW_OPTIONS = >($(OEM_ABANDON_SW_OPTIONS), $(ProductSoftware$(Option)Name))
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output $(ThisInfFileName)" ShellCode error"
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                    EndWait
                    Debug-Output $(ThisInfFileName)" Registry error: add software components"
                    CloseRegKey $($R1)
                    CloseRegKey $($R2)
                    CloseRegKey $($R3)
                    CloseRegKey $($R4)
                    CloseRegKey $($R5)
                    goto fatalregistry
                endif
                set OldVersion$(Option)Existed = $(TRUE)
                set SoftProductKey      = $($R1)
                Set SoftNetRuleKey      = $($R2)
                Set SoftServiceKey      = $($R3)
                Set SoftParameterKey    = $($R4)
                Set SoftLinkageKey      = $($R5)
                set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                                   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                                   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                                   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
                                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
                                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Name)},+
                                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                Debug-Output $(ThisInfFileName)" Adding value to S/W Product key for "$(Option)
                Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output $(ThisInfFileName)" ShellCode error."
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                    EndWait
                    Debug-Output $(ThisInfFileName)" Registry error: add value list"
                    CloseRegKey $(SoftProductKey)
                    CloseRegKey $(SoftNetRuleKey)
                    CloseRegKey $(SoftServiceKey)
                    CloseRegKey $(SoftParameterKey)
                    CloseRegKey $(SoftLinkageKey)
                    goto fatalregistry
                endif
                set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftware$(Option)Type)},+
                                    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftware$(Option)Use)}, +
                                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftware$(Option)BindForm)}, +
                                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftware$(Option)Class)}, +
                                    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftware$(Option)Bindable)}, +
                                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
                Debug-Output $(ThisInfFileName)" Adding value to S/W NetRule key for "$(Option)
                Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output $(ThisInfFileName)" ShellCode error."
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                CloseRegKey $(SoftProductKey)
                CloseRegKey $(SoftNetRuleKey)
                CloseRegKey $(SoftServiceKey)
                CloseRegKey $(SoftParameterKey)
                CloseRegKey $(SoftLinkageKey)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                    EndWait
                    Debug-Output $(ThisInfFileName)" Registry error: add value list."
                    goto fatalregistry
                endif
            else
                Debug-Output $(ThisInfFileName)" S/W for "$(Option)" already exists, not re-installing"
            endif
        endif
    EndForListDo
; INSTALLING HARDWARE COMPONENTS
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set SlotNum = *($($),2)
        set EISAId = *($($),3)
        ifint $(EISAId) == $(C320_EISA_ID)
            set Option = C320NT
        else-Ifint $(EISAId) == $(C320T_EISA_ID)
            set Option = C320TNT
        else
            goto fatal
        endif
        Debug-Output $(ThisInfFileName)" Bus: "$(BusNum)" Slot: "$(SlotNum)" EISAID: "$(EISAId)" Option: "$(Option)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(SlotNum), $(ProductHardware$(Option)Description), $(ProductHardware$(Option)Name)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif
        ifstr(i) $($R1) != "YES"
            Debug-Output $(ThisInfFileName)" Adding H/W Component "$(Option)" Slot: "$(SlotNum)
            Shell $(UtilityInf), AddHardwareComponent,$(ProductHardware$(Option)Name),$(STF_CONTEXTINFNAME),$(ProductKey$(Option)Name)
            ifint $($R4) != -1
                Set OEM_ABANDON_HW_OPTIONS = >($(OEM_ABANDON_HW_OPTIONS), {$(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4),$(ProductSoftware$(Option)Name)})
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" Cannot add hardware component"
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output $(ThisInfFileName)" Registry error: add hardware component"
                Debug-Output $(ThisInfFileName)" Registry Error Index: "$(RegistryErrorIndex)
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            set KeyAdapter = $($R1)
            set KeyAdapterRules = $($R2)
            set KeyAdapterParameters = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList =  {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Name)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Debug-Output $(ThisInfFileName)" Adding H/W Component Value"
            Shell  $(UtilityInf), AddValueList, $(KeyAdapter), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error"
                goto ShellCodeError
            endif
            Shell $(UtilityInf), GetBusTypeNum
            set BusTypeNum = $($R1)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error."
                goto ShellCodeError
            endif
            set NewValueList = {+
                               {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                               {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                               {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
                               {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardTypeValue)},+
                               {TransmitQDepth,$(NoTitle),$(!REG_VT_DWORD),20},+
                               {ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),32},+
                               {BurstSize,$(NoTitle),$(!REG_VT_DWORD),63}+
                               }
            Debug-Output $(ThisInfFileName)" Adding H/W Component parameters"
            Shell  $(UtilityInf), AddValueList, $(KeyAdapterParameters), $(NewValueList)
            CloseRegKey $(KeyParameters)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error."
                goto ShellCodeError
            endif
            set TempProdName = """"$(ProductHardware$(Option)Name)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardware$(Option)BindForm)
            set NewValueList =  {+
                                {type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)},+
                                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)},+
                                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}+
                                }
            Debug-Output $(ThisInfFileName)" Adding H/W Component rules"
            Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error."
                goto ShellCodeError
            endif
            CloseRegKey $(KeyAdapter)
            CloseRegKey $(KeyAdapterParameters)
            CloseRegKey $(KeyAdapterRules)
        else
            Debug-Output $(ThisInfFileName)" Adapter already installed in Slot: "$(SlotNum)
        endif
    EndForListDo
    goto writeparameters
writeparameters = +
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyC320NTName) == $(!NTN_RegBase)
        Debug-Output $(ThisInfFileName)" removing S/W component C320NT"
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareC320NTName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(ThisInfFileName)" ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else-Ifstr(i) $(ProductKeyC320TNTName) == $(!NTN_RegBase)
        Debug-Output $(ThisInfFileName)" removing S/W component C320TNT"
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareC320TNTName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(ThisInfFileName)" ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Debug-Output $(ThisInfFileName)" Opening NTN_RegBase = "$(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetAdapterKey
        Ifstr $(NetAdapterKey) == $(KeyNull)
            Debug-Output $(ThisInfFileName)" Could not open Adapter key"
            goto fatalregistry
        else
            GetRegValue $(NetAdapterKey), "ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)
            Debug-Output $(ThisInfFileName)" ServiceName in NTN_RegBase is "$(ServiceName)
            GetRegValue $(NetAdapterKey), "ProductName", ProductNameInfo
            set Option = *($(ProductNameInfo), 4)
            Debug-Output $(ThisInfFileName)" ProductName in NTN_RegBase is "$(Option)
            CloseRegKey $(NetAdapterKey)
            ifstr(i) $(ServiceName) != ""
                Debug-Output $(ThisInfFileName)" Removing "$(Option)" H/W"
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                    $(ProductSoftware$(Option)Name), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output $(ThisInfFileName)" ShellCode error"
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                    goto fatalregistry
                endif
             endif
        endif
    endif
    goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyC320NTName) == $(!NTN_RegBase)
        set Option = C320NT
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyC320NTName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            Debug-Output $(ThisInfFileName)" Upgrading C320NT S/W"
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error"
                goto ShellCodeError
            endif
            set !UG_Filename = $($R0)
            ifstr(i) $(!UG_Filename) != ""
                Debug-Output $(ThisInfFileName)" Copying C320NT sys & inf files for C320NT"
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            ifint $(Version) != $(ProductVersion)
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    else-Ifstr(i) $(ProductKeyC320TNTName) == $(!NTN_RegBase)
        set Option = C320TNT
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyC320TTName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            Debug-Output $(ThisInfFileName)" Upgrading C320TNT S/W"
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(ThisInfFileName)" ShellCode error"
                goto ShellCodeError
            endif
            set !UG_Filename = $($R0)
            ifstr(i) $(!UG_Filename) != ""
                Debug-Output $(ThisInfFileName)" Copying C320TNT sys & inf files"
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            ifint $(Version) != $(ProductVersion)
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    else
        Debug-Output $(ThisInfFileName)" H/W upgrade requested, just make sure the H/W component exists"
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)
            OpenRegKey $(NetworkCardKey) "" "NetRules" $(MAXIMUM_ALLOWED) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
            else
                goto fatalregistry
            endif
            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            goto fatalregistry
        endif
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey
        Ifstr(i) $(ServiceKey) != $(KeyNull)
            Debug-Output $(ThisInfFileName)" Service "$(ServiceName)" exists"
            CloseRegKey $(ServiceKey)
        else
            goto fatalregistry
        endif
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_HW_OPTIONS)
        Debug-Output $(ThisInfFileName)" H/W Abandon: Component: "*($($),1)" S/W Name: "*($($),2)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            *($($),2), *($($),1)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(ThisInfFileName)" ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    ForListDo $(OEM_ABANDON_SW_OPTIONS)
        Debug-Output $(ThisInfFileName)" S/W Abandon: Component: "$($)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $($), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(ThisInfFileName)" ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = "Error: "$(FunctionTitle)
    set STF_MB_TEXT  = "Shell Code Error"
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "Cisco EISA Driver Disk"  , TAGFILE = disk1
    2  = "Windows NT Setup CD-ROM Disk"  , TAGFILE = disk2
    99  = "LMHOST disk", TAGFILE = lmhosts
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,oemsetup.inf,    SIZE=1000, RENAME=$(!UG_Filename)
[Files-C320NT]
1,c320nt.sys , SIZE=46000
[Files-C320TNT]
1,c320tnt.sys, SIZE=47000