[MHZC922]
; PROTOCOL.INI entries for the Ethernet*Modem card.

DriverName=MHZC92$

; The following values must be specified if the enabler is
; used to configure the card.
;
;  IOBASE is the base LAN I/O address
;  INTERRUPT is the LAN interrupt (which is the actual hardware IRQ)
;  MEMWINDOW is the (24-bit) address of the attribute memory window
;  COMPORT is the modem comm port.
;
; Note: If using card and socket services, the comm port interrupt
;       and the LAN interrupt must be the same.

INTERRUPT=3
IOBASE=0x320
MEMWINDOW=0xD0000
COMPORT=2

; The media type will depend on the type of network you will connect to.
; The types "10BASET" and "10BASE2" are possible.

TRANSCEIVER=10BASET