[MHZC922]
; PROTOCOL.INI entries for the Ethernet card.

DriverName=MHZC92$

; The following values must be specified if the enabler is
; used to configure the card.
;
;  IOBASE is the base LAN I/O address
;  INTERRUPT is the LAN interrupt (which is the actual hardware IRQ)
;  MEMWINDOW is the (24-bit) address of the attribute memory window

INTERRUPT=3
IOBASE=0x320
MEMWINDOW=0xD0000

; The media type will depend on the type of network you will connect to.
; The types "10BASET" and "10BASE2" are possible.

TRANSCEIVER=10BASET