;------------------------------------------------------------------------------
; OEMSETNT.INF
; Megahertz Combo network card and driver SETUP INF file.
; Author: tscribne@mhz.com
;------------------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCMCIA
ISA
[LanguagesSupported]
ENG
[Options]
XJEM3336
XJEM3288
CC10BT
[OptionsTextENG]
XJEM3336 = "Megahertz CC/XJEM3336 Ethernet+Modem PCMCIA Adapter"
XJEM3288 = "Megahertz XJEM3288 Ethernet+Modem PCMCIA Adapter"
CC10BT = "Megahertz CC10BT/2 Ethernet PCMCIA Adapter"
[Source Media Descriptions]
1 = "Megahertz Network Drivers Diskette"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-MHZ]
1, mhzc9x.sys, SIZE=999
[Files-Dll]
1, mhzc9x.dll, SIZE=999
1, mhzc9x.hlp, SIZE=999
[Files-Detect]
1, mhzncdet.dll, SIZE=999
[Files-Modem]
1, mdmmhz.inf, SIZE=999
1, mdmmhza.inf, SIZE=999
[Files-Inf]
1, oemsetnt.inf, SIZE=999
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[FileConstants]
GenericInfVersion = " v1.00"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
SubroutnInf = "SUBROUTN.INF"
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
[RegistryConstants]
SoftwareType = "driver"
Manufacturer = "Megahertz"
; Product Info -------------------------------------------------
ProductMajorVersion = "1"
ProductMinorVersion = "21"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
; Software -----------------------------------------------------
ProductSoftwareName = "mhzc9x"
ProductSoftwareTitle = "Megahertz Ethernet Driver"
ProductSoftwareDescription = "Megahertz Ethernet Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\mhzc9x.sys"
NetRuleSoftwareType = "Mhzc9xSys ndisDriver mhzc9xDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """mhzc9xSys"" yes no container"
NetRuleSoftwareClass = {"mhzc9xDriver basic"}
NetRuleSoftwareBindable = {"mhzc9xDriver mhzc9xAdapter non exclusive 100"}
; Hardware -----------------------------------------------------
ProductHardwareName = "mhzc9x"
ProductHardwareXJEM3336Description = "Megahertz CC/XJEM3336 PCMCIA Adapter"
ProductHardwareXJEM3336Title = "Megahertz CC/XJEM3336 PCMCIA Adapter"
ProductHardwareXJEM3288Description = "Megahertz XJEM3288 PCMCIA Adapter"
ProductHardwareXJEM3288Title = "Megahertz XJEM3288 PCMCIA Adapter"
ProductHardwareXJEM1144Description = "Megahertz XJEM1144 PCMCIA Adapter"
ProductHardwareXJEM1144Title = "Megahertz XJEM1144 PCMCIA Adapter"
ProductHardwareEM1144Description = "Megahertz EM1144 PCMCIA Adapter"
ProductHardwareEM1144Title = "Megahertz EM1144 PCMCIA Adapter"
ProductHardwareCC10BTDescription = "Megahertz CC10BT/2 PCMCIA Adapter"
ProductHardwareCC10BTTitle = "Megahertz CC10BT/2 PCMCIA Adapter"
NetRuleHardwareType = "mhzc9x mhzc9xAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"mhzc9xAdapter basic"}
; Registry Key --------------------------------------------------
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
; PCMCIA Tuples -------------------------------------------------
VERS1Product = "CC/XJEM3288"
VERS1Manufacturer = "Megahertz"
[GeneralConstants]
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "The Megahertz XJEM3288 is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "Megahertz PCMCIA Card Setup"$(GenericInfVersion)
DialogDllName = "MHZC9X.DLL"
IrqList = ^(MhzIrqs, 1)
IrqValues = ^(MhzIrqs, 2)
MediaList = ^(MhzMediaTypes,1)
MediaValues = ^(MhzMediaTypes,2)
IoBaseList = ^(MhzIoBase, 1)
IoBaseValues = ^(MhzIoBase, 2)
COMBaseList = ^(MhzCOMBase, 1)
COMBaseValues = ^(MhzCOMBase, 2)
COMPortList = ^(MhzCOMBase, 3)
MemBaseList = ^(MhzCISMemBase, 1)
MemBaseValues = ^(MhzCISMemBase, 2)
SockList = ^(MhzSocket, 1)
SockValues = ^(MhzSocket, 2)
XmitList = ^(MhzXmit, 1)
XmitValues = ^(MhzXmit, 2)
[MhzIrqs]
;Interrupts available on Intel : { 3,4,5,7,9,10,11,12,14,15 }
;Interrupts available on Databook: { 3,4,5,7,10,14 }
IRQ0 = " 3", 3
IRQ1 = " 4", 4
IRQ2 = " 5", 5
IRQ3 = " 7", 7
IRQ4 = " 9", 9
IRQ5 = "10", 10
IRQ6 = "11", 11
IRQ7 = "12", 12
IRQ8 = "14", 14
IRQ9 = "15", 15
[MhzIoBase]
Base0 = "0x100", 256
Base1 = "0x120" 288
Base1 = "0x140", 320
Base2 = "0x180", 384
Base1 = "0x1A0", 416
Base3 = "0x1C0", 448
Base1 = "0x1E0", 480
Base4 = "0x200", 512
Base1 = "0x220", 544
Base1 = "0x240", 576
Base1 = "0x260", 608
Base5 = "0x280", 640
Base1 = "0x2A0", 672
Base1 = "0x2C0", 704
Base1 = "0x2E0", 736
Base6 = "0x300", 768
Base1 = "0x320", 800
Base7 = "0x340", 832
Base1 = "0x360", 864
Base8 = "0x380", 896
[MhzMediaTypes]
Media_0 = "10BaseT",0
Media_1 = "10Base2",1
[MhzCOMBase]
COMBase0 = "COM1", 1016, "COM1"
COMBase1 = "COM2", 760, "COM2"
COMBase2 = "COM3", 1000, "COM3"
COMBase3 = "COM4", 744, "COM4"
[MhzCISMemBase]
MemBase0 = "0xC8000", 819200
MemBase1 = "0xC9000", 823296
MemBase2 = "0xCA000", 827392
MemBase3 = "0xCB000", 831488
MemBase4 = "0xCC000", 835584
MemBase5 = "0xCD000", 839680
MemBase6 = "0xCE000", 843776
MemBase7 = "0xCF000", 847872
MemBase8 = "0xD0000", 851968
MemBase9 = "0xD1000", 856064
MemBase10 = "0xD2000", 860160
MemBase11 = "0xD3000", 864256
MemBase12 = "0xD4000", 868352
MemBase13 = "0xD5000", 872448
MemBase14 = "0xD6000", 876544
MemBase15 = "0xD7000", 880640
MemBase16 = "0xD8000", 884736
MemBase17 = "0xD9000", 888832
MemBase18 = "0xDA000", 892928
MemBase19 = "0xDB000", 897024
MemBase20 = "0xDC000", 901120
MemBase21 = "0xDD000", 905216
MemBase22 = "0xDE000", 909312
MemBase23 = "0xDF000", 913408
MemBase24 = "0xE0000", 917504
MemBase25 = "0xE1000", 921600
MemBase26 = "0xE2000", 925696
MemBase27 = "0xE3000", 929792
MemBase28 = "0xE4000", 933888
MemBase29 = "0xE5000", 937984
MemBase30 = "0xE6000", 942080
MemBase31 = "0xE7000", 946176
MemBase32 = "0xE8000", 950272
MemBase33 = "0xE9000", 954368
MemBase34 = "0xEA000", 958464
MemBase35 = "0xEB000", 962560
MemBase36 = "0xEC000", 966656
MemBase37 = "0xED000", 970752
MemBase38 = "0xEE000", 974848
MemBase39 = "0xEF000", 978944
[HexDigits]
Hex0 = 0
Hex1 = 1
Hex2 = 2
Hex3 = 3
Hex4 = 4
Hex5 = 5
Hex6 = 6
Hex7 = 7
Hex8 = 8
Hex9 = 9
HexA = A
HexB = B
HexC = C
HexD = D
HexE = E
HexF = F
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = 1
Continue = "Continue"
Cancel = "Cancel"
BadAddr1 = "Network Address must be 12 hexadecimal digits in length"
BadAddr2 = "Network Address contains the invalid hexadecimal digit: "
BadAddr3 = "Network Address invalid, group bit must be 0"
IRQConflict = "The Modem and LAN function cannot share the same IRQ"
IRQForced = "The LAN function must be assigned IRQ 11 to ensure "+
"proper operation on a Databook PCIC"
IRQInvalid = "The Modem IRQ that has been selected is not supported "+
"when using a Databook PCIC"
BadPCMCIA = "Unable to determine the type of PCMCIA Interface Controller. "+
"Do you want to continue?"
PCICType = "PCIC: "
[FileDependentDlgENG]
DlgType = "MultiCombo"
DlgTemplate = $(Option)
Caption = $(FunctionTitle)
Combo1Label = "&IRQ Level:"
Combo2Label = "I/O &Port:"
Combo3Label = "Memory &Window:"
Combo4Label = "&Media Type:"
Combo5Label = "&Com Port:"
Combo1List = $(IrqList)
Combo1Out = $(InterruptNumber)
Combo2List = $(IoBaseList)
Combo2Out = $(IOBaseAddrValue)
Combo3List = $(MemBaseList)
Combo3Out = $(MemBaseAddrValue)
Combo4List = $(MediaList)
Combo4Out = $(MediaNumber)
Combo5List = $(COMBaseList)
Combo5Out = $(COMIoBaseAddrValue)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out}
CBOptionsGreyed = {}
RCCtlFocusOn = 403
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
;;;; set !DebugOutputControl = 1
set Status = STATUS_SUCCESSFUL
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($0) == ""
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
;
; Check if the platforms requested are supported
;
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
ifstr(i) $($1) == ""
set Status = STATUS_NOTSUPPORTED
endif
else
set Status = STATUS_NOTSUPPORTED
endif
ExitReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms RegistryConstants
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
;
; Set up the operation-mode-based variables and welcome the user.
; If the "install mode" variable is improperly set, assume that this
; is a new installation.
;
Begin = +
Set ActiveDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set SubFunction = RemoveAdapter
else-Ifstr(i) $(!NTN_InstallMode) == install
set SubFunction = InstallAdapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
else-Ifstr(i) $(!NTN_InstallMode) == Update
set SubFunction = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == configure
set SubFunction = ConfigureAdapter
set ActivateDetection = TRUE
;
; You cannot configure software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "INF: Cannot configure the Megahertz server software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
Endif
else
set SubFunction = NoWay
Endif
Debug-Output "INF: =================================================="
Debug-Output "INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "INF: Option is: "$(Option)
Debug-Output "INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "INF: =================================================="
Set DetectedCard = FALSE
;
; No PCMCIA support for now
;
set PCMCIA = 1
; Setup the default values
set InterruptNumber = *($(IrqList), 3) ; LAN IRQ = 5
set IOBaseAddrValue = *($(IoBaseList), 17) ; IOBase address = 0x320
set COMIoBaseAddrValue = *($(COMBaseList), 3) ; Modem IOBase address = (COM3)
set MemBaseAddrValue = *($(MemBaseList), 9) ; Memory address = 0xD0000
set MediaNumber = *($(MediaList),0)
Ifstr(i) $(ActivateDetection) != TRUE
Goto $(SubFunction)
Endif
; Set TypeList = {{IRQ, IRQ_List, InterruptNumber},+
; {IOADDR, IOADDR_Addr_List, IOBaseAddrValue},+
; {TRANSCEIVER, TranceiverValueList, MediaValue},+
; {MEMADDR, MemBaseAddrDecList, MemBaseAddrValue},+
; {COMIOADDR, COM_IOADDR_Addr_List, COMIoBaseAddrValue}}
Set TypeList = {{IRQ, IRQ_List, InterruptNumber},+
{IOADDR, IOADDR_Addr_List, IOBaseAddrValue},+
{MEDIA, TranceiverValueList, MediaNumber},+
{MEMADDR, MemBaseAddrDecList, MemBaseAddrValue}}
Debug-Output "INF: Calling Param_BuildTypeLists"
; Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
; Set Status = $($R0)
; ifstr(i) $(Status) != STATUS_SUCCESSFUL
; goto fataldetect
; Endif
Debug-Output "INF: Calling Param_SetDefaults"
Shell $(ParamInf) Param_SetDefaults {}
Set from = $(fatal)
Set to = $(fatal)
Goto $(SubFunction)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
InstallAdapter = +
;
; First, check for same version
;
set OldVersionExisted = $(FALSE)
set KeyProduct = $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
ifstr(i) $($R1) != "OK"
goto End
endif
goto End
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error: cannot get an error string."
goto ShellCodeError
Endif
Ifstr(i) $($R1) != "OK"
goto End
Endif
Set OldVersionExisted = $(TRUE)
endif
endif
Set CurrParamSettings = {}
;
; dll load addition for NCDetect.dll
;
Ifstr(i) $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Dll"
Ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
goto fatal
Endif
Shell $(UtilityInf) UpdateDetectionDllNames
Endif
Endif
goto AdapterSetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
ConfigureAdapter = +
Debug-Output "INF: Configure Adapter"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "INF: Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they are under serivce paramters
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
Endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "INF: Cannot find component product key"
goto fatalregistry
Endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values from the Registry
; *********************************************************
EnumRegValue $(KeyParameters) ValueList
Debug-Output "INF: Option is "$(Option)
Ifstr(i) $(Option) == CC10BT
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "MediaType"
set MediaValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
set MemoryAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDReadyInterrupt"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
Endif
EndForListDo
Else
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "MediaType"
set MediaValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
set MemoryAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDReadyInterrupt"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress_1"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set COMBaseIndex = $(ValueData)
Endif
EndForListDo
Endif
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto AdapterVerify
endif
Debug-Output "We will not do a adapter verify here....."
;;;;goto AdapterVerify
;
; Get the converted values
;
set InterruptNumber = *($(IrqList), ~($(IrqValues),$(IRQValueIndex)))
ifstr(i) $(InterruptNumber) == ""
set InterruptNumber = *($(IrqList), 2)
endif
set MediaNumber = *($(MediaList),~($(MediaValues),$(MediaValueIndex)))
ifstr(i) $(MediaNumber) == ""
set MediaNumber = *($(MediaList),2)
endif
set MemBaseAddrValue = *($(MemBaseList), ~($(MemBaseValues),$(MemoryAddrIndex)))
ifstr(i) $(MemBaseAddrValue) == ""
set MemBaseAddrValue = *($(MemBaseList), 2)
endif
set IOBaseAddrValue = *($(IoBaseList), ~($(IoBaseValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IoBaseList), 1)
endif
set COMIoBaseAddrValue = *($(COMBaseList), ~($(COMBaseValues),$(COMBaseIndex)))
ifstr(i) $(COMIoBaseAddrValue) == ""
set COMIoBaseAddrValue = *($(COMBaseList), 6)
endif
Shell $(ParamInf) Param_SaveValues
set CurrParamSettings = $($R0)
AdapterSetup = +
Set from = AdapterSetup
Debug-Output "AdapterSetup"
Set from = AdapterOptions
AdapterOptions = +
read-syms FileDependentDlg$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
set DLLPATH = $(DLLPATH)
ContinueOperation =+
SetHelpFile $(DLLPATH)mhzc9x.hlp 1 1
set AdapterStatus = $(FALSE)
set EditTextIn = {$(NetworkAddress)}
set NotifyFields = {NO}
set EditTextLim = {12}
set EditFocusOn = ""
Debug-Output "INF Loading library for "$(DialogDllName)
LoadLibrary "disk 1" $(DialogDllName) DllHandle
RetryDialog =+
Debug-Output "INF: Display our dialog now!"
ui start "InputDlg" $(DllHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set AdapterStatus = $(TRUE)
set SLOTCOUNT = 8
set SLOT = 0
set SLOTFOUND = 1
Goto slotcontinue
slotcontinue = +
; Fall Through
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(DllHandle)
Debug-Output "INF: Action: BACK"
goto End
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(DllHandle)
Debug-Output "INF: Action: Unknown. Bye!"
goto End
endif
ui pop 1
FreeLibrary $(DllHandle)
set IRQValueIndex = $(Combo1Out)
set IOBaseAddrIndex = $(Combo2Out)
set COMBaseIndex = $(Combo5Out)
set MemoryAddrIndex = $(Combo3Out)
set MediaValueIndex = $(Combo4Out)
; Shell $(UtilityInf), GetBusTypeNum
; set BusTypeNum = $($R1)
; Ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "INF: ShellCode error."
; goto ShellCodeError
; Endif
;
Debug-Output "INF: Getting BusType"
Ifstr(i) $(!STF_NCDETINFO) == {}
Ifint $(PCMCIA) != 1
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
Ifint $(ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
else
set BusInterfaceType = 1
set BusNumber = 0
Endif
else
set BusInterfaceType = *($(!STF_NCDETINFO),5)
set BusNumber = *($(!STF_NCDETINFO),6)
Endif
;
; If PCMCIA bus selected, then move to the ISA bus ...
;
Ifint $(BusInterfaceType) == 8
set BusInterfaceType = 1
set PCMCIA = 1
Endif
Debug-Output "INF: Setting values"
set MemBaseAddrValue = *($(MemBaseValues), ~($(MemBaseList), $(MemoryAddrIndex)))
set InterruptNumber = *($(IrqValues), ~($(IrqList), $(IRQValueIndex)))
set IOBaseAddrValue = *($(IoBaseValues), ~($(IoBaseList), $(IOBaseAddrIndex)))
set COMIoBaseAddrValue = *($(COMBaseValues), ~($(COMBaseList), $(COMBaseIndex)))
set ComPortValue = *($(COMPortList), ~($(COMBaseList), $(COMBaseIndex)))
set MediaNumber = *($(MediaValues), ~($(MediaList),$(MediaValueIndex)))
Set IOLengthValue = 31
AdapterVerify = +
; Ifstr(i) $(DetectedCard) != TRUE
; Shell $(ParamInf) Param_SaveValues
; Set NewParamSettings = $($R0)
; Ifstr(i) $(CurrParamSettings) == {}
; Set DiffParamSettings = $(NewParamSettings)
; Else
; Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
; Set DiffParamSettings = $($R0)
; Endif
; Debug-Output "INF: Calling Param_VerifyResources"
; Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
; Ifstr(i) $($R0) == STATUS_SUCCESSFUL
; Debug-Output "INF: Param_VerifyResources succeeded"
; Goto skipoptions
; Endif
; Else
; Set CardVerifyIndex = $(!STF_NCDETCARD)
; Debug-Output "INF: Calling Param_VerifyCard"
; Shell $(ParamInf) Param_VerifyCard $(!SFT_NCDETCARD)
; Ifstr(i) $($R0) == STATUS_SUCCESSFUL
; Debug-Output "INF: Param_VerifyCard succeeded"
; Goto skipoptions
; Endif
; Endif
Set from = AdapterOptions
Set to = skipoptions
Debug-Output "INF: Verify Warning..."
; Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
; Ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-output "Shellcode error: cannot get an error string."
; goto ShellCodeError
; Endif
; set Error = $($R0)
; Goto Warning
skipoptions =+
Ifint $(OldVersionExisted) == $(TRUE)
Ifstr(i) $(!NTN_InstallMode) == configure
Goto WriteParameters
Endif
Endif
StartWait
;
; Add Software Components
;
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
Endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDOND_SOFTWARE = TRUE
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
Goto ShellCodeError
Endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "INF: Registry error: Add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
Endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $($R0) != NO_ERROR
EndWait
Debug-Output "INF: Resgitry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
Endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),"XJEM3288"}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "INF: Resgitry error: add value list."
goto fatalregistry
endif
Endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "INF: Registry Error: Add Hardware Component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
; TES FIXED
;set Option = "XJEM3288"
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
goto ShellCodeError
Endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)},+
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)},+
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "INF: Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
Endif
CloseRegKey $(KeyAdapterRules)
Goto WriteParameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
WriteParameters = +
Ifstr(i) $(Option) == CC10BT
Debug-Output "INF: Writing CC10BT"
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),0},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaNumber)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptNumber)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),16},+
{PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+
{PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),4096},+
{PCCARDAttributeMemoryOffset,$(NoTitle),$(!REG_VT_DWORD),0},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}
Else
Debug-Output "INF: Writing Multifunction Adapter RegInfo"
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaNumber)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptNumber)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(COMIoBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),8},+
{IoBaseAddress_1,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength_1,$(NoTitle),$(!REG_VT_DWORD),16},+
{PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+
{PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),4096},+
{PCCARDAttributeMemoryOffset,$(NoTitle),$(!REG_VT_DWORD),0},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+
{ModemFunction,$(NoTitle),$(!REG_VT_DWORD),1}}
Endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
;
; add the comm port info to the SYSTEM\CurrentControlSet\Services\Serial\Parameters section of the registry
; We no longer have to do the following, Bob took care of this with the
; new pcmcia.sys driver for NT40 (is in the post beta 2)
;
; Ifcontains(i) $(Option) in {"XJEM3288"}
; Ifstr(i) $(ComPortValue) != "None"
; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialMhz" $(MAXIMUM_ALLOWED) MyNewSerialHandle
; Ifstr $(MyNewSerialHandle) == $(KeyNull)
; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey
; CreateRegKey $(SerialKey) {"SerialMhz",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
; CloseRegKey $(SerialKey)
; Endif
; Set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(ComPortValue)},+ ; "COMx"
; {ForceFifoEnable, $(NoTitle),$(!REG_VT_DWORD), 1},+ ; Always true
; {Interrupt, $(NoTitle),$(!REG_VT_DWORD), $(InterruptNumber)},+ ; Interrupt for MHZ modem
; {PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(COMIoBaseAddrValue)}} ; I/O Base address for
; Shell $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList)
; CloseRegKey $(MyNewSerialHandle)
;
; ;add comm port info to HARDWARE\DEVICEMAP\SERIALCOMM section
; OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle
; Ifstr $(MyNewSerialHandle) == $(KeyNull)
; OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey
; CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
; CloseRegKey $(SerialKey)
; Endif
; SetRegValue $(MyNewSerialHandle) {"SerialMhz",$(NoTitle),$(!REG_VT_SZ),$(ComPortValue)}
; CloseRegKey $(MyNewSerialHandle)
;
; ; add comm port info to SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports section
; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) MyNewSerialHandle
; Ifstr $(MyNewSerialHandle) == $(KeyNull)
; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey
; CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle
; CloseRegKey $(SerialKey)
; Endif
; SetRegValue $(MyNewSerialHandle) {$(ComPortValue)":",$(NoTitle),$(!REG_VT_SZ),"9600,n,8,1"}
; CloseRegKey $(MyNewSerialHandle)
; Else
; ;
; ; Remove the COM port
; ;
; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) MyNewSerialHandle
; DeleteRegTree $(MyNewSerialHandle) "SerialMhz"
; CloseRegKey $(MyNewSerialHandle)
;
; OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle
; DeleteRegValue $(MyNewSerialHandle) "SerialMhz"
; CloseRegKey $(MyNewSerialHandle)
; Endif
; Endif
;
; Write the parameters to the PCMCIA database section.
;
set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
Debug-Output "INF: Opening PCMICA database key "$(PCMCIADatabaseKeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey
Ifstr $(PCMCIADatabaseKey) == $(NULL)
Debug-Output "INF: Pcmcia\DataBase not present"
else
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName)"\Megahertz" $(MAXIMUM_ALLOWED) PCMCIADatabaseMegahertzKey
Ifstr $(PCMCIADatabaseMegahertzKey) != $(NULL)
Debug-Output "INF: Removing Megahertz Key..."
;
; Delete sub-tree if it was found
;
CloseRegKey $(PCMCIADatabaseMegahertzKey)
DeleteRegTree $(PCMCIADatabaseKey) "Megahertz"
Endif
Debug-Output "INF: Creating Megahertz KEY"
CreateRegKey $(PCMCIADatabaseKey) {"Megahertz", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseMegahertzKey
Debug-Output "INF: Adding Megahertz Keys..."
; Do the Modem+Ethernet Cards ----------------------------------------------------------------------------------
CreateRegKey $(PCMCIADatabaseMegahertzKey) {"CC/XJEM3288", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseMhzKey
SetRegValue $(PCMCIADatabaseMhzKey) {Driver, 0, $(!REG_VT_SZ),"mhzc9x"}
SetRegValue $(PCMCIADatabaseMhzKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
SetRegValue $(PCMCIADatabaseMhzKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
SetRegValue $(PCMCIADatabaseMhzKey) {PortWidth16, 0, $(!REG_VT_DWORD),1}
CloseRegKey $(PCMCIADatabaseMhzKey)
CreateRegKey $(PCMCIADatabaseMegahertzKey) {"XJEM1144/CCEM1144", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseMhzKey
SetRegValue $(PCMCIADatabaseMhzKey) {Driver, 0, $(!REG_VT_SZ),"mhzc9x"}
SetRegValue $(PCMCIADatabaseMhzKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
SetRegValue $(PCMCIADatabaseMhzKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
SetRegValue $(PCMCIADatabaseMhzKey) {PortWidth16, 0, $(!REG_VT_DWORD),1}
CloseRegKey $(PCMCIADatabaseMhzKey)
CreateRegKey $(PCMCIADatabaseMegahertzKey) {"EM1144-T", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseMhzKey
SetRegValue $(PCMCIADatabaseMhzKey) {Driver, 0, $(!REG_VT_SZ),"mhzc9x"}
SetRegValue $(PCMCIADatabaseMhzKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
SetRegValue $(PCMCIADatabaseMhzKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
SetRegValue $(PCMCIADatabaseMhzKey) {PortWidth16, 0, $(!REG_VT_DWORD),1}
CloseRegKey $(PCMCIADatabaseMhzKey)
CreateRegKey $(PCMCIADatabaseMegahertzKey) {"EM1144T", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseMhzKey
SetRegValue $(PCMCIADatabaseMhzKey) {Driver, 0, $(!REG_VT_SZ),"mhzc9x"}
SetRegValue $(PCMCIADatabaseMhzKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
SetRegValue $(PCMCIADatabaseMhzKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
SetRegValue $(PCMCIADatabaseMhzKey) {PortWidth16, 0, $(!REG_VT_DWORD),1}
CloseRegKey $(PCMCIADatabaseMhzKey)
CreateRegKey $(PCMCIADatabaseMegahertzKey) {"CC10BT/2", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseMhzKey
SetRegValue $(PCMCIADatabaseMhzKey) {Driver, 0, $(!REG_VT_SZ),"mhzc9x"}
SetRegValue $(PCMCIADatabaseMhzKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
SetRegValue $(PCMCIADatabaseMhzKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
SetRegValue $(PCMCIADatabaseMhzKey) {PortWidth16, 0, $(!REG_VT_DWORD),1}
CloseRegKey $(PCMCIADatabaseMhzKey)
CreateRegKey $(PCMCIADatabaseMegahertzKey) {"CC/XJEM3336", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseMhzKey
SetRegValue $(PCMCIADatabaseMhzKey) {Driver, 0, $(!REG_VT_SZ),"mhzc9x"}
SetRegValue $(PCMCIADatabaseMhzKey) {AttributeMemorySize, 0, $(!REG_VT_DWORD),4096}
SetRegValue $(PCMCIADatabaseMhzKey) {DeviceType, 0, $(!REG_VT_SZ),"NET"}
SetRegValue $(PCMCIADatabaseMhzKey) {PortWidth16, 0, $(!REG_VT_DWORD),1}
CloseRegKey $(PCMCIADatabaseMhzKey)
CloseRegKey $(PCMCIADatabaseMegahertzKey)
CloseRegKey $(PCMCIADatabaseKey)
Endif
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error."
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "INF: Registry error: Add value list"
goto fatalregistry
Endif
EndWait
Goto successful
NoWay =+
set Error = "Sorry, not yet implemented."
Goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
RemoveAdapter =+
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove software components
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
Goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Goto fatalregistry
Endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
Goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Goto fatalregistry
Endif
Endif
Goto End
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware =+
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
Goto ShellCodeError
Endif
set !UG_Filename = $($R0)
Ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
Ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Goto fatal
Endif
Endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for the update
;
Ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let's Upgrade the product
;
;
; make other upgrade change if necessary
;
Endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
Goto fatalregistry
Endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" $(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
Endif
Endif
Goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(SubroutnInf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(SubroutnInf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto end
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(SubroutnInf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set ProCaption = $(!p:ProCaption)
set ProCancel = $(!p:ProCancel)
set ProCancelMsg = $(!p:ProCancelMsg)
set ProCancelCap = $(!p:ProCancelCap)
set ProText1 = $(!p:ProText1)
set ProText2 = $(!p:ProText2)
set STF_VITAL = ""
Ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
AddSectionFilesToCopyList Files-Detect $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-MHZ $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; AddSectionFilesToCopyList Files-MSOFT $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
Endif
Ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = $(!TRUE)
CopyFilesInCopyList
Endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-Detect $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-MHZ $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; AddSectionFilesToCopyList Files-MSOFT $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Modem $(SrcDir) $(!STF_WINDOWSSYSPATH)\ras
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Detect $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[WarnError]
read-syms FileConstants
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) NONFATAL $(Message)
Return
