BOARD
	ID = "TCM5090"
	NAME = "3Com 3C509-TP Network Adapter"
	MFR = "3Com Corporation"
	CATEGORY = "NET"
	LENGTH = 160
	READID = yes
	AMPERAGE = 400
	DISABLE = supported
	HELP = 
	   "The 3Com 3C509-TP network adapter
	   connects your personal
	   computer to an 802.3 local area network.\n
	   \n
	   Refer to the adapter guide for
	   additional information on configuring
	   this adapter."

IOPORT(1) = 0zc86h
	SIZE = word
	INITVAL = xxxxxxxxx0xxxxxx

IOPORT(2) = 0zc88h
	SIZE = word
	INITVAL = LOC(15 14 13 12 9 8 7 6 5 4 3 2 1 0) xxxxxxxxxxxxxx

FUNCTION = "I/O Address Range"
	SHOW = NO
	HELP =
	    "This function is a placeholder for the I/O ports resource."
	CHOICE = ""
	    LINK
		PORT = 0z0h-0zfh
		INIT = IOPORT(1) LOC(4 3 2 1 0) 11111

FUNCTION = "Interrupt Request Level"
	HELP =
	   "Determines the interrupt request level that is used by the adapter."
	CHOICE = "3"
		LINK
		    IRQ = 3
		    INIT = IOPORT(2) LOC(15 14 13 12) 0011
	CHOICE = "5"
		LINK
		    IRQ = 5
		    INIT = IOPORT(2) LOC(15 14 13 12) 0101
	CHOICE = "7"
		LINK
		    IRQ = 7
		    INIT = IOPORT(2) LOC(15 14 13 12) 0111
	CHOICE = "9"
		LINK
		    IRQ = 9
		    INIT = IOPORT(2) LOC(15 14 13 12) 1001
	CHOICE = "10"
		LINK
		    IRQ = 10
		    INIT = IOPORT(2) LOC(15 14 13 12) 1010
	CHOICE = "11"
		LINK
		    IRQ = 11
		    INIT = IOPORT(2) LOC(15 14 13 12) 1011
	CHOICE = "12"
		LINK
		    IRQ = 12
		    INIT = IOPORT(2) LOC(15 14 13 12) 1100
	CHOICE = "15"
		LINK
		    IRQ = 15
		    INIT = IOPORT(2) LOC(15 14 13 12) 1111

FUNCTION = "Boot PROM Size"
	HELP = 
	   "Specifies the size of the boot PROM that
	   is installed on the adapter for remote
	   system booting over the network.\n
	   \n
	   Disabled  -  No boot PROM is installed.\n
	   \n
	   8K  -  An 8K boot PROM is installed.\n
	   \n
	   16K  -  A 16K boot PROM is installed.\n
	   \n
	   32K  -  A 32K boot PROM is installed."
	CHOICE = "Disabled"
		LINK
			INIT = IOPORT(1) LOC(13 12 11 10 9 8) 000000
	CHOICE = "8K"
		COMBINE
			MEMORY = 8k
				ADDRESS = 0c2000h-0de000h  STEP = 8k
				MEMTYPE = oth
				WRITABLE = no
				SIZE = word
				DECODE = 20
			INIT = IOPORT(1) LOC(13 12 11 10 9 8) 000001 | 000010 | 000011 | 000100 | 000101 | 000110 | 000111 | 001000 | 001001 | 001010 | 001011 | 001100 | 001101 | 001110 | 001111
	CHOICE = "16K"
		COMBINE
			MEMORY = 16k
				ADDRESS = 0c0000h-0dc000h  STEP = 16k
				MEMTYPE = oth
				WRITABLE = no
				SIZE = word
				DECODE = 20
			INIT = IOPORT(1) LOC(13 12 11 10 9 8) 010001 | 010010 | 010100 | 000110 | 011000 | 011010 | 011100 | 011110
	CHOICE = "32K"
		COMBINE
			MEMORY = 32k
				ADDRESS = 0c0000h-0d8000h  STEP = 32k
				MEMTYPE = oth
				WRITABLE = no
				SIZE = word
				DECODE = 20
			INIT = IOPORT(1) LOC(13 12 11 10 9 8) 100001 | 100100 | 101000 | 101100

FUNCTION = "Transceiver Type"
	HELP = 
	   "Specifies which of the adapter's
	   transceivers is being used.\n
	   \n
	   On-board TP  -  The on-board transceiver
	   (RJ-45 connector) on the the adapter is
	   being used.\n
	   \n
	   External  -  An external transceiver
	   (AUI connector) is being used."
	CHOICE = "On-board TP"
		LINK
			INIT = IOPORT(1) LOC(15 14) 00
	CHOICE = "External"
		LINK
			INIT = IOPORT(1) LOC(15 14) 01

; %VER 3C509-TP EISA Configuration File v2.0a