;DrIvEr DeScRiPtIoN

VER:	1.00
SYN:	1.00

;3Com 3C5X9 EtherLink III v4.0 server driver information file
;which support ISA bus, EISA bus and MCA bus

DR 3C5X9_1
{
   DES:		"3Com EtherLink III Family Driver v4.0 "
   HELP:	"You can use this driver in an ISA, an EISA, 
                 or an MCA file server."

   PAR:		1.00
   PROD:	5090, 5091, 5092, 5093, 5094, 5095, 5096, 5097
   FILE:  	3C5X9.LAN
	OF:		MSM.NLM, ETHERTSM.NLM

   PR	PORT	
	if (BUS == ISA) REQUIRED
      else OPTIONAL

   {
	DES:	"IO Port"
	HELP:	"Select the IO port address"

	TYP:	HEX(3)
        VAL:	200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 2A0,
                2B0, 2C0, 2D0, 2E0, 2F0, 300, 310, 320, 330, 340, 350,
                360, 370, 380, 390, 3A0, 3B0, 3C0, 3D0, 3E0
	DEF:	300
	RES:	10
   }
   
   PR	SLOT	
	if (BUS == MCA) REQUIRED
	   else OPTIONAL 
   {
	DES:	"Slot Number"
	HELP:	"Select the slot number holding the board for which
                you are loading the driver."

	TYP:	DECIMAL(1)
        VAL:	1-8
   }

   PR	IDPORT	OPTIONAL
   {
	DES:	"ID Port"
	HELP:	"Select the ID port address which will be used to
		activate the board."

	TYP:	HEX(3)
	VAL:	110, 120, 130, 140, 150, 160, 170, 180, 190,
 		1A0, 1B0, 1C0, 1D0, 1E0, 1F0
	DEF:	110	
   }
   PR	NODE
   {
   }

   FR	FrameSelect
   {
	DES:	"Frame Types"
	HELP:	"The default frame types are the 802.2 and 802.3.
		 It is strongly recommended that at least 802.2 be
		 selected. For existing networks, select BOTH 802.2
		 and 802.3."

	CD:	"802.3"
	CH:	'Ethernet_802.3'

	CD:	"802.2"
	CH:	'Ethernet_802.2'

	CD:	"802.2 SNAP"
	CH:	'Ethernet_SNAP'

	CD:	"Ethernet II"
	CH:	'Ethernet_II'

	DEF:	1, 2
   }
}

;DrIvEr DeScRiPtIoN EnD