;
; 3Com Corporation
; Configuring the AUTOLINK.CFG File
;
; The AutoLink configuration file (AUTOLINK.CFG) lets you customize your
; AutoLink installations. Each of the parameters are defined below.
; Read the option description for each parameter.
; KEYWORD DEFAULT VALUE DESCRIPTION
; ============= ============== =============================
CREATE_LOG_FILE YES ; Option: [Yes|No]
;
; Creates the file C:\AUTOLINK.LOG
; which contains information generated
; by AutoLink.
RUN_DIAGNOSTICS NO ; Option: [Yes|No]
;
; The Group 1 Diagnostic tests check
; the adapter's physical components
; and circuitry during the AutoLink
; installation.
AUTO_CONFIGURE NO ; Option: [Yes|No]
;
; Automatically configures the I/O
; Base Address, and Interrupt to
; settings that do not conflict with
; any other device in the computer.
CONFIGURATION_FILE ; This optional file configures the
; adapter with the parameters saved
; in a configuration file
; (ex. C:\3C59X.SET).
; Note: A full path is required.
; For more information or to create
; the configuration file, refer to the
; Configuration and Diagnostic Program.
EDIT_CONFIG.SYS YES ; Option: [Yes|No]
;
; YES edits C:\CONFIG.SYS and saves
; the original file to C:\CONFIG.3CM.
;
; NO does not change C:\CONFIG.SYS.
; You need to manually edit the file.
EDIT_AUTOEXEC.BAT YES ; Option: [Yes|No]
;
; YES edits C:\AUTOEXEC.BAT and saves
; the original file to C:\AUTOEXEC.3CM.
;
; NO does not change C:\AUTOEXEC.BAT.
; You need to manually edit the file.
EDIT_NET.CFG YES ; Option: [Yes|No]
;
; YES edits NET.CFG and saves the
; original file to NET.3CM.
;
; NO does not change NET.CFG. You
; need to manually edit the file.
SMARTAGENT_INFO YES ; Option: [Yes|No]
;
; Adds the Transcend SmartAgent section
; into the NET.CFG file. The Transcend
; SmartAgent software is already
; incorporated into the NetWare ODI
; driver. Adding the SmartAgent section
; into NET.CFG lets the management
; information be customized for
; each user.
3INSTALL_FRAME_TYPE ; Options: Ethernet_802.2
; Ethernet_802.3
; Ethernet_II
; Ethernet_SNAP
;
; Default = AutoDetects 802.2 & 802.3
;
; This parameter defines the frame
; type that AutoLink will use to connect
; to the 3INSTALL account on the server.
; If no value is specified, Autolink
; will first attempt to connect using
; Ethernet_802.2 and then Ethernet_802.3.
TARGET_DIRECTORY C:\NWCLIENT ; Options: Any designated directory.
;
; If no existing NetWare installation is
; detected, AutoLink copies the NetWare
; client software to the default
; directory. If AutoLink finds an
; existing NetWare client installation,
; AutoLink will install to that directory
; and this path will NOT be used.
CONNECT_TO_SERVER YES ; Option: [Yes|No]
;
; YES connects AutoLink to a 3INSTALL
; account on a server and copies the
; latest client software or custom
; configuration.
;
; NO installs the NetWare client
; software from this diskette and does
; NOT look for a server.
; For information on 3INSTALL read:
; A:\QINSTALL\SERVER\README.TXT.
PREFERRED_SERVER ; No Default
;
; Preferred server identifies which
; NetWare Server (2.x or 3.x) has the
; 3INSTALL account. For NetWare 4.x,
; leave this parameter blank and use
; NetWare Directory Services to login
; 3INSTALL to the correct server.
; %VER3C59X autolink.cfg v1.0c