;
; 3Com Corporation
; Configuring the AUTOLINK.CFG File
;
; The AutoLink configuration file (AUTOLINK.CFG) lets you customize your
; AutoLink installations. Each of the parameters are defined below.
; Read the option description for each parameter.
; KEYWORD DEFAULT VALUE DESCRIPTION
; ============= ============== =============================
WINDOWS_VERSION ; Option: [WFW311|WIN31X]
;
; Installs windows support for Netware
; networks on either Windows for
; Workgroups (if WFW311) or Windows 3.1x
; (if WIN31X). If this option is set then
; the WINDOWS_DIRECTORY option must also
; be set. If this option is not set then
; Autolink will setup a DOS client only.
WINDOWS_DIRECTORY ; Option: Full path, including drive, of
; the windows system that Autolink will
; set up Netware support for. To us this
; option you MUST specify what type of
; windows you are running in that directory
; in the WINDOWS_VERSION option above.
CREATE_LOG_FILE YES ; Option: [Yes|No]
;
; Creates the file C:\AUTOLINK.LOG
; which contains information generated
; by AutoLink.
RUN_DIAGNOSTICS NO ; Option: [Yes|No]
;
; The Group 1 Diagnostic tests check
; the adapter's physical components
; and circuitry during the AutoLink
; installation.
AUTO_CONFIGURE YES ; Option: [Yes|No]
;
; Automatically configures the Media
; Type Setting.
CONFIGURATION_FILE ; Option: Path & Name of a configuration
; file.
; This optional file configures the
; adapter with the parameters saved in a
; configuration file.
; (ex. C:\3C59X.SET).
; For more information or to create
; the configuration file, refer to the
; Configuration and Diagnostic Program.
; Note: For this option to be activated,
; type in the configuration file path &
; name, and set AUTO_CONFIGURE to YES.
EDIT_CONFIG.SYS YES ; Option: [Yes|No]
;
; YES edits C:\CONFIG.SYS and saves
; the original file to C:\CONFIG.3CM.
;
; NO does not change C:\CONFIG.SYS.
; You need to manually edit the file.
EDIT_AUTOEXEC.BAT YES ; Option: [Yes|No]
;
; YES edits C:\AUTOEXEC.BAT and saves
; the original file to C:\AUTOEXEC.3CM.
;
; NO does not change C:\AUTOEXEC.BAT.
; You need to manually edit the file.
EDIT_NET.CFG YES ; Option: [Yes|No]
;
; YES edits NET.CFG and saves the
; original file to NET.3CM.
;
; NO does not change NET.CFG. You
; need to manually edit the file.
SMARTAGENT_INFO YES ; Option: [Yes|No]
;
; Adds the Transcend SmartAgent section
; into the NET.CFG file. The Transcend
; SmartAgent software is already
; incorporated into the NetWare ODI
; driver. Adding the SmartAgent section
; into NET.CFG lets the management
; information be customized for
; each user.
3INSTALL_FRAME_TYPE ; Options: Ethernet_802.2
; Ethernet_802.3
; Ethernet_II
; Ethernet_SNAP
;
; Default = AutoDetects 802.2 & 802.3
;
; This parameter defines the frame
; type that AutoLink will use to connect
; to the 3INSTALL account on the server.
; If no value is specified, Autolink
; will first attempt to connect using
; Ethernet_802.2 and then Ethernet_802.3.
TARGET_DIRECTORY C:\NWCLIENT ; Options: Any designated directory.
;
; AutoLink searches C:\AUTOEXEC.BAT for
; an existing NetWare installation.
; If no existing NetWare installation is
; detected, AutoLink copies the NetWare
; client software to the target
; directory. If AutoLink finds an
; existing NetWare client installation,
; AutoLink will install to that directory
; and this path will NOT be used.
CONNECT_TO_SERVER YES ; Option: [Yes|No]
;
; YES connects AutoLink to a server, and
; allows AutoLink to detect the frame type.
; If AutoLink finds a server, it looks for
; the file 3INSTALL.BAT in the LOGIN
; directory of the server. If AutoLink finds
; the file 3INSTALL.BAT it spawns it.
;
; NO installs the NetWare client software from
; this diskette and does NOT look for a server.
; For information on the 3INSTALL.BAT file
; read:
; A:\AUTOLINK\AUTOLINK.TXT.
PREFERRED_SERVER ; No Default
;
; Preferred server identifies which NetWare
; Server (2.x, 3.x or 4.x) has the
; 3INSTALL.BAT file.
LOCATE_NIC NO ; DO NOT CHANGE THIS OPTION
; %VER ETHER autolink.cfg v1.0b