3Com Corporation
Network Drivers Installation Notes


Microsoft LAN Manager versions 2.0, 2.1, and 2.2
------------------------------------------------

 The EtherDisk diskette contains a subdirectory 
 structure and files that make it an OEM import 
 disk for the LAN Manager installer.  Use the 
 import function of the LAN Manager installer 
 to capture the NDIS driver from the EtherDisk diskette.  
 Be sure to save the new configuration before exiting the
 installer.

DOS installation with Lan Manager 2.2
-------------------------------------

 The following describes the procedure for 
 importing the driver during installation of 
 Lan Manager 2.2 for DOS.

 1. Begin the MS-DOS Lan Manager installation by 
    inserting the MS-DOS Setup diskette and 
    typing A:SETUP.

 2. After reading the Microsoft Drivers 1 diskette, 
    a window is displayed showing available Network 
    Adapter Drivers.  In this window choose the
    following function:

    Select Other Driver         (Alt-D)

 3. When prompted to insert your network driver 
    diskette, insert the EtherDisk.

 4. After the driver is imported from the EtherDisk, 
    a box will be displayed showing the driver.  
    Select the EtherLink III LAN + Modem PC Card driver.

 5. Continue with the remainder of the installation 
    by next selecting a protocol to use with the 
    EtherLink III LAN + Modem PC Card driver.


=========================================================
SYSTEM.INI information
=======================
   In order for the modem to function correctly 
in MS Windows, add the following commands to your 
Window's  SYSTEM.INI file under the [386Enh] category:   
(In case they are not there already)

[386Enh]
     :
     :
COM1Base=3F8
COM1Irq=4
COM2Base=2F8
COM2Irq=3
COM3Base=3E8
COM3Irq=4
COM4Base=2E8
COM4Irq=3

=========================================================

=========================================================
Please Note
============

 Although the driver name is ELPC3X.DOS, the internal 
 driver name (used in PROTOCOL.INI) is ELPC3$                                  
=========================================================

(%VER NDIS - MS LAN Manager v2.0d)