;DrIvEr DeScRiPtIoN

SyntaxVersion: 1.00

Driver NV40XBMV
	{
	Description:
	"Tekram VESA SCSI Adapter Disk Driver / ASPI Manager"

	Help:
	"In order for the driver to recognize the supported adapter(s),
	 the I/O port address must be entered, which is selected
	 thru on-board jumper setting. Once the I/O address is
	 input, the corresponding IRQ and DMA are automatically
	 detected by reading the info stored in EEPROM. After driver
	 is installed, on screen shown are the following messages:\n\n

		\tAdapter SCSI ID   :  7\n
		\tI/O Port Address  :  330 (Hex)\n
		\tInterrupt Level   :  11\n
		\tDMA Channel	    :  5\n
		\tM/B over 16 Meg   :  Yes\n\n

	 The last line means the memory size of mainboard is
	 over 16 MB. The driver takes care of 16 MB boundary
	 problem automatically. ASPITRAN.DSK is the transport
	 layer for ASPI interface, thru which devices other
	 than disk, e.g. tape, CD-ROM, are manipulated, and
	 it is loaded accompanying NV40XBMV.DSK."

	ProductID:	DC880, DC380
	File:		NV40XBMV.DSK
	OFiles: 	ASPITRAN.DSK


	PROMPT PORT REQUIRED
		{
		Description:	    "I/O port of the host adapter"
		Help:		    "Input the adapter I/O port address
				     manually."
		Type:		    HEX(3)
		Values: 	    330, 334, 234, 230, 134, 130
		Default:	    330
		ReservedLength:     8
		}

	}

Driver ASPITRAN
	{
	Description:
	"Tekram SCSI Adaper ASPI Transport Layer"
	File:		ASPITRAN.DSK
	}

;DrIvEr DeScRiPtIoN EnD