Triones

                    Bus Master EIDE/ATAPI Device Driver
                           for Intel PIIX(2/3/4)

                INSTALLATION PROCEDURE FOR WINDOWS NT4.0 

                             (January 10, 1997)

The following bus master device driver installation/de-installation procedure
is only for Windows NT Workstation 4.0. 
                                      
Before you begin the procedure, prepare a floopy diskette with all the driver
files copied under the root.


1.  INSTALLATION
    1.  Open My Computer
    2.  Open Control Panel
    3.  Open SCSI Adapters
    4.  Click "Drivers"
    5.  Select "IDE CD-ROM (ATAPI 1.2)/Dual-channel PCI IDE Controller" 
        and then click "Remove" to remove it
    6.  Click "Add..."
    7.  Click "Have Disk..."
    8.  Insert the floopy diskette into drive A:, then click "OK"
    9.  Select "PIIX Bus Master EIDE/ATAPI", then click "OK"
    10. Click "Continue"
    11. Click "Yes" to restart your computer to use the bus master driver


2.  DE-INSTALLATION
    1.  Open My Computer
    2.  Open Control Panel
    3.  Open SCSI Adapters
    4.  Click "Drivers"
    5.  Select "PIIX Bus Master EIDE/ATAPI" and then click "Remove"
        to remove it
    6.  Click "Add..."
    7.  Select "Standard Mass Storage Controllers" and
        then click "OK"
    8.  Click "Yes" to restart your computer to use the NT default driver


3. Re-Install Bus Master Driver
    1.  Open My Computer
    2.  Open Control Panel
    3.  Open SCSI Adapters
    4.  Click "Drivers"
    5.  Select "IDE CD-ROM (ATAPI 1.2)/Dual-channel PCI IDE Controller" 
        and then click "Remove" to remove it
    6.  Select "Additional Models"
    7.  Select "PIIX Bus Master EIDE/ATAPI", then click "OK"
    8.  Click "Yes" to restart your computer to use the bus master driver