Verion v1.3 Windows95 prs8095.mpd for Parallel/SCSI-PRS80
0.  Unzip the prs80951.zip.  Copy all of the files into a blank diskette.
1.  Make sure your system has at least one parallel printer setup.
2.  Setup your SCSI subsystem and SparCSI( 1 or 2 ).
3.  Use the "Setting", "Control Panel", "Add New Hardware", select "SCSI 
	Controller".
4.  Have disk ready.  Select "Have Disk".  Type in "a:\psepp" and "Next"
    to start installation.
5.  Use the adapter setting to change the parameter like:
	/In:  host adapter scsi id, value range from 0 to 7. 7 is default
	/Zn:  byte-per-byte handshaking mode
          0 - is blind mode( default )
		  1 - byte-per-byte mode
		  Consult the "Appendix in the SparcSI manual or readme.txt for 
          detailed setting/functions.
    /Sn:  delay value between each data stream, n value range from 0-9
          0 - fastest, no delay
          1...9 -- variable speed 
6.  A new PSDIAG.EXE version 3.30 is also included to enable the
	EPP mode during the bootup.  Toggle the EPP mode in the DOS prompt 
	after bootup.

Bug Fixed:
1.  Problems with SyQuest EZ135 drive.  Fixed.
2.  Problems with NEC 3xp CD-ROM. Always in Audio mode.  Fixed.
3.  No need to set for /Z1 for scanner application.  MPD driver will 
	automatically set to /Z1 for scanner devices. However, should /Z1 set
    in the adapter setting, it will apply to all device types.   V1.3